Sternenlabor/nuki_hub
2
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Update README.md

Browse Source
This commit is contained in:
Jan-Ole Schümann
2022-05-05 09:05:45 +02:00
committed by GitHub
parent a76874d54a
commit 2c4e7ff396
1 changed files with 2 additions and 2 deletions
Download Patch File Download Diff File Expand all files Collapse all files

4
README.md
View File

@@ -18,11 +18,11 @@ https://github.com/technyon/nuki_hub/releases
The firmware uses the Wifi Manager to configure the WiFi network. Power up the ESP32, a new Access Point should appear. Connect to this access point and in a browser navigate to "192.168.4.1". Use the web interface configure your Wifi network.
After configuring the Wifi, the ESP should automatically connect to your network. Use the web interface to setup the MQTT broker; just navigate to the IP-Address assigned to the ESP32 via DHCP (often found the web interface of the internet router).
After configuring the Wifi, the ESP should automatically connect to your network. Use the web interface to setup the MQTT broker; just navigate to the IP-Address assigned to the ESP32 via DHCP (often found in the web interface of the internet router).
## Paring
Just enable pairing mode on the NUKI lock and power on the ESP32. Pairing should be automatic. Unfortunately there's no feedback at the time, except for debug output on the serial line. If it worked, the lock state and the battery level should be reported via MQTT.
Just enable pairing mode on the NUKI lock and power on the ESP32. Pairing should be automatic. When pairing is successful, the web interface should show "Paired: Yes" (reload page in browser). Nodes like lock state and battery level should now report the reported values from the lock.
## MQTT Interface