Sternenlabor/nuki_hub
2
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

add general input/output information to the readme

Browse Source
This commit is contained in:
technyon
2023-06-08 18:32:38 +02:00
parent f23290dea6
commit 16cf4ae36c
2 changed files with 5 additions and 2 deletions
Download Patch File Download Diff File Expand all files Collapse all files

4
Config.h
View File

@@ -1,8 +1,8 @@
#pragma once
#define NUKI_HUB_VERSION "8.24-pre-3"
#define NUKI_HUB_VERSION "8.24"
#define MQTT_QOS_LEVEL 1
#define MQTT_CLEAN_SESSIONS false
#define GPIO_DEBOUNCE_TIME 300
#define GPIO_DEBOUNCE_TIME 200

3
README.md
View File

@@ -196,6 +196,9 @@ can be configured for a specific role:
- Output: High when RTO active: Outputs a high signal when ring-to-open is active (opener)
- Output: High when CM active: Outputs a high signal when continuous mode is active (opener)
- Output: High when RTO or CM active: Outputs a high signal when either ring-to-open or continuous mode is active (opener)
- General input (pull-down): The pin is configured in pull-down configuration and its state is published to the "gpio/pin_x/state" topic
- General input (pull-up): The pin is configured in pull-up configuration and its state is published to the "gpio/pin_x/state" topic
- Genral output: The pin is set to high or low depending on the "gpio/pin/x/state" topic
Note: The old setting "Enable control via GPIO" is removed. If you had enabled this setting before upgrading to 8.22, the PINs are automatically configured to be
compatible with the previously hard-coded PINs.