update changelog for 2412100

Usermod BME280: Fix "Unit of Measurement" for temperature

.devcontainer/Dockerfile

@@ -2,7 +2,12 @@
 
 # [Choice] Python version: 3, 3.9, 3.8, 3.7, 3.6
 ARG VARIANT="3"
-FROM mcr.microsoft.com/devcontainers/python:0-${VARIANT}
+FROM mcr.microsoft.com/vscode/devcontainers/python:0-${VARIANT}
+
+# [Option] Install Node.js
+ARG INSTALL_NODE="true"
+ARG NODE_VERSION="lts/*"
+RUN if [ "${INSTALL_NODE}" = "true" ]; then su vscode -c "source /usr/local/share/nvm/nvm.sh && nvm install ${NODE_VERSION} 2>&1"; fi
 
 # [Optional] If your pip requirements rarely change, uncomment this section to add them to the image.
 # COPY requirements.txt /tmp/pip-tmp/

.devcontainer/devcontainer.json

@@ -5,7 +5,10 @@
 		"context": "..",
 		"args": { 
 			// Update 'VARIANT' to pick a Python version: 3, 3.6, 3.7, 3.8, 3.9
-			"VARIANT": "3"
+			"VARIANT": "3",
+			// Options
+			"INSTALL_NODE": "true",
+			"NODE_VERSION": "lts/*"
 		}
 	},
 
@@ -24,35 +27,34 @@
 	// risk to running the build directly on the host.
 	// "runArgs": ["--privileged", "-v", "/dev/bus/usb:/dev/bus/usb", "--group-add", "dialout"],
 
-	"customizations": {
-		"vscode": {
-			"settings": { 
-				"terminal.integrated.shell.linux": "/bin/bash",
-				"python.pythonPath": "/usr/local/bin/python",
-				"python.linting.enabled": true,
-				"python.linting.pylintEnabled": true,
-				"python.formatting.autopep8Path": "/usr/local/py-utils/bin/autopep8",
-				"python.formatting.blackPath": "/usr/local/py-utils/bin/black",
-				"python.formatting.yapfPath": "/usr/local/py-utils/bin/yapf",
-				"python.linting.banditPath": "/usr/local/py-utils/bin/bandit",
-				"python.linting.flake8Path": "/usr/local/py-utils/bin/flake8",
-				"python.linting.mypyPath": "/usr/local/py-utils/bin/mypy",
-				"python.linting.pycodestylePath": "/usr/local/py-utils/bin/pycodestyle",
-				"python.linting.pydocstylePath": "/usr/local/py-utils/bin/pydocstyle",
-				"python.linting.pylintPath": "/usr/local/py-utils/bin/pylint"
-			},
-			"extensions": [
-				"ms-python.python",
-				"platformio.platformio-ide"
-			]
-		}
+	// Set *default* container specific settings.json values on container create.
+	"settings": { 
+		"terminal.integrated.shell.linux": "/bin/bash",
+		"python.pythonPath": "/usr/local/bin/python",
+		"python.linting.enabled": true,
+		"python.linting.pylintEnabled": true,
+		"python.formatting.autopep8Path": "/usr/local/py-utils/bin/autopep8",
+		"python.formatting.blackPath": "/usr/local/py-utils/bin/black",
+		"python.formatting.yapfPath": "/usr/local/py-utils/bin/yapf",
+		"python.linting.banditPath": "/usr/local/py-utils/bin/bandit",
+		"python.linting.flake8Path": "/usr/local/py-utils/bin/flake8",
+		"python.linting.mypyPath": "/usr/local/py-utils/bin/mypy",
+		"python.linting.pycodestylePath": "/usr/local/py-utils/bin/pycodestyle",
+		"python.linting.pydocstylePath": "/usr/local/py-utils/bin/pydocstyle",
+		"python.linting.pylintPath": "/usr/local/py-utils/bin/pylint"
 	},
 
+	// Add the IDs of extensions you want installed when the container is created.
+	"extensions": [
+		"ms-python.python",
+		"platformio.platformio-ide"
+	],
+
 	// Use 'forwardPorts' to make a list of ports inside the container available locally.
 	// "forwardPorts": [],
 
 	// Use 'postCreateCommand' to run commands after the container is created.
-	"postCreateCommand": "bash -i -c 'nvm install && npm ci'",
+	"postCreateCommand": "npm install",
 
 	// Comment out connect as root instead. More info: https://aka.ms/vscode-remote/containers/non-root.
 	"remoteUser": "vscode"

.github/FUNDING.yml

@@ -1,3 +1,2 @@
-github: [Aircoookie,blazoncek,DedeHai,lost-hope,willmmiles]
+github: [Aircoookie,blazoncek]
 custom: ['https://paypal.me/Aircoookie','https://paypal.me/blazoncek']
-thanks_dev: u/gh/netmindz

.github/ISSUE_TEMPLATE/bug.yml

@@ -80,7 +80,7 @@ body:
     id: terms
     attributes:
       label: Code of Conduct
-      description: By submitting this issue, you agree to follow our [Code of Conduct](https://github.com/wled-dev/WLED/blob/main/CODE_OF_CONDUCT.md)
+      description: By submitting this issue, you agree to follow our [Code of Conduct](https://github.com/Aircoookie/WLED/blob/master/CODE_OF_CONDUCT.md)
       options:
         - label: I agree to follow this project's Code of Conduct
           required: true

.github/copilot-instructions.md

@@ -1,138 +0,0 @@
-# WLED - ESP32/ESP8266 LED Controller Firmware
-
-WLED is a fast and feature-rich implementation of an ESP32 and ESP8266 webserver to control NeoPixel (WS2812B, WS2811, SK6812) LEDs and SPI-based chipsets. The project consists of C++ firmware for microcontrollers and a modern web interface.
-
-Always reference these instructions first and fallback to search or bash commands only when you encounter unexpected information that does not match the info here.
-
-## Working Effectively
-
-### Initial Setup
-- Install Node.js 20+ (specified in `.nvmrc`): Check your version with `node --version`
-- Install dependencies: `npm ci` (takes ~5 seconds)
-- Install PlatformIO for hardware builds: `pip install -r requirements.txt` (takes ~60 seconds)
-
-### Build and Test Workflow
-- **ALWAYS build web UI first**: `npm run build` -- takes 3 seconds. NEVER CANCEL.
-- **Run tests**: `npm test` -- takes 40 seconds. NEVER CANCEL. Set timeout to 2+ minutes.
-- **Development mode**: `npm run dev` -- monitors file changes and auto-rebuilds web UI
-- **Hardware firmware build**: `pio run -e [environment]` -- takes 15+ minutes. NEVER CANCEL. Set timeout to 30+ minutes.
-
-### Build Process Details
-The build has two main phases:
-1. **Web UI Generation** (`npm run build`):
-   - Processes files in `wled00/data/` (HTML, CSS, JS)
-   - Minifies and compresses web content 
-   - Generates `wled00/html_*.h` files with embedded web content
-   - **CRITICAL**: Must be done before any hardware build
-
-2. **Hardware Compilation** (`pio run`):
-   - Compiles C++ firmware for various ESP32/ESP8266 targets
-   - Common environments: `nodemcuv2`, `esp32dev`, `esp8266_2m`
-   - List all targets: `pio run --list-targets`
-
-## Validation and Testing
-
-### Web UI Testing
-- **ALWAYS validate web UI changes manually**:
-  - Start local server: `cd wled00/data && python3 -m http.server 8080`
-  - Open `http://localhost:8080/index.htm` in browser
-  - Test basic functionality: color picker, effects, settings pages
-- **Check for JavaScript errors** in browser console
-
-### Code Validation
-- **No automated linting configured** - follow existing code style in files you edit
-- **Code style**: Use tabs for web files (.html/.css/.js), spaces (2 per level) for C++ files
-- **C++ formatting available**: `clang-format` is installed but not in CI
-- **Always run tests before finishing**: `npm test`
-
-### Manual Testing Scenarios
-After making changes to web UI, always test:
-- **Load main interface**: Verify index.htm loads without errors
-- **Navigation**: Test switching between main page and settings pages
-- **Color controls**: Verify color picker and brightness controls work
-- **Effects**: Test effect selection and parameter changes
-- **Settings**: Test form submission and validation
-
-## Common Tasks
-
-### Repository Structure
-```
-wled00/                 # Main firmware source (C++)
-  ├── data/            # Web interface files 
-  │   ├── index.htm    # Main UI
-  │   ├── settings*.htm # Settings pages
-  │   └── *.js/*.css   # Frontend resources
-  ├── *.cpp/*.h        # Firmware source files
-  └── html_*.h         # Generated embedded web files (DO NOT EDIT)
-tools/                 # Build tools (Node.js)
-  ├── cdata.js         # Web UI build script
-  └── cdata-test.js    # Test suite
-platformio.ini         # Hardware build configuration
-package.json           # Node.js dependencies and scripts
-.github/workflows/     # CI/CD pipelines
-```
-
-### Key Files and Their Purpose
-- `wled00/data/index.htm` - Main web interface
-- `wled00/data/settings*.htm` - Configuration pages  
-- `tools/cdata.js` - Converts web files to C++ headers
-- `wled00/wled.h` - Main firmware configuration
-- `platformio.ini` - Hardware build targets and settings
-
-### Development Workflow
-1. **For web UI changes**:
-   - Edit files in `wled00/data/`
-   - Run `npm run build` to regenerate headers
-   - Test with local HTTP server
-   - Run `npm test` to validate build system
-
-2. **For firmware changes**:
-   - Edit files in `wled00/` (but NOT `html_*.h` files)
-   - Ensure web UI is built first (`npm run build`)
-   - Build firmware: `pio run -e [target]`
-   - Flash to device: `pio run -e [target] --target upload`
-
-3. **For both web and firmware**:
-   - Always build web UI first
-   - Test web interface manually
-   - Build and test firmware if making firmware changes
-
-## Build Timing and Timeouts
-
-- **Web UI build**: 3 seconds - Set timeout to 30 seconds minimum
-- **Test suite**: 40 seconds - Set timeout to 2 minutes minimum  
-- **Hardware builds**: 15+ minutes - Set timeout to 30+ minutes minimum
-- **NEVER CANCEL long-running builds** - PlatformIO downloads and compilation can take significant time
-
-## Troubleshooting
-
-### Common Issues
-- **Build fails with missing html_*.h**: Run `npm run build` first
-- **Web UI looks broken**: Check browser console for JavaScript errors
-- **PlatformIO network errors**: Try again, downloads can be flaky
-- **Node.js version issues**: Ensure Node.js 20+ is installed (check `.nvmrc`)
-
-### When Things Go Wrong
-- **Clear generated files**: `rm -f wled00/html_*.h` then rebuild
-- **Force web UI rebuild**: `npm run build -- --force` or `npm run build -- -f`
-- **Clean PlatformIO cache**: `pio run --target clean`
-- **Reinstall dependencies**: `rm -rf node_modules && npm install`
-
-## Important Notes
-
-- **DO NOT edit `wled00/html_*.h` files** - they are auto-generated
-- **Always commit both source files AND generated html_*.h files**
-- **Web UI must be built before firmware compilation**
-- **Test web interface manually after any web UI changes**
-- **Use VS Code with PlatformIO extension for best development experience**
-- **Hardware builds require appropriate ESP32/ESP8266 development board**
-
-## CI/CD Pipeline
-The GitHub Actions workflow:
-1. Installs Node.js and Python dependencies
-2. Runs `npm test` to validate build system
-3. Builds web UI with `npm run build` 
-4. Compiles firmware for multiple hardware targets
-5. Uploads build artifacts
-
-Match this workflow in your local development to ensure CI success.

.github/workflows/build.yml

@@ -26,7 +26,7 @@ jobs:
 
 
   build:
-    name: Build Environments
+    name: Build Enviornments
     runs-on: ubuntu-latest
     needs: get_default_envs
     strategy:
@@ -38,12 +38,8 @@ jobs:
     - name: Set up Node.js
       uses: actions/setup-node@v4
       with:
-        node-version-file: '.nvmrc'
         cache: 'npm'
-    - run: |
-        npm ci
-        VERSION=`date +%y%m%d0`
-        sed -i -r -e "s/define VERSION .+/define VERSION $VERSION/" wled00/wled.h
+    - run: npm ci
     - name: Cache PlatformIO
       uses: actions/cache@v4
       with:
@@ -60,7 +56,6 @@ jobs:
           cache: 'pip'
     - name: Install PlatformIO
       run: pip install -r requirements.txt
-
     - name: Build firmware
       run: pio run -e ${{ matrix.environment }}
     - uses: actions/upload-artifact@v4
@@ -79,7 +74,7 @@ jobs:
       - name: Use Node.js
         uses: actions/setup-node@v4
         with:
-          node-version-file: '.nvmrc'
+          node-version: '20.x'
           cache: 'npm'
       - run: npm ci
       - run: npm test

.github/workflows/nightly.yml

@@ -1,49 +0,0 @@
-
-name: Deploy Nightly
-on:
-  # This can be used to automatically publish nightlies at UTC nighttime
-  schedule:
-    - cron: '0 2 * * *' # run at 2 AM UTC
-  # This can be used to allow manually triggering nightlies from the web interface
-  workflow_dispatch:
-
-jobs:
-  wled_build:
-    uses: ./.github/workflows/build.yml
-  nightly:
-    name: Deploy nightly
-    runs-on: ubuntu-latest
-    needs: wled_build
-    steps:
-      - name: Download artifacts
-        uses: actions/download-artifact@v4
-        with:
-          merge-multiple: true
-      - name: Show Files
-        run: ls -la
-      - name: "✏️ Generate release changelog"
-        id: changelog
-        uses: janheinrichmerker/action-github-changelog-generator@v2.3
-        with:
-          token: ${{ secrets.GITHUB_TOKEN }} 
-          sinceTag: v0.15.0
-          # Exclude issues that were closed without resolution from changelog
-          exclude-labels: 'stale,wontfix,duplicate,invalid'
-      - name: Update Nightly Release
-        uses: andelf/nightly-release@main
-        env:
-          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
-        with:
-          tag_name: nightly
-          name: 'Nightly Release $$'
-          prerelease: true
-          body: ${{ steps.changelog.outputs.changelog }}
-          files: |
-            *.bin
-            *.bin.gz
-      - name: Repository Dispatch
-        uses: peter-evans/repository-dispatch@v3
-        with:
-          repository: wled/WLED-WebInstaller
-          event-type: release-nightly
-          token: ${{ secrets.PAT_PUBLIC }}

.github/workflows/pr-merge.yaml

@@ -1,38 +0,0 @@
-    name: Notify Discord on PR Merge
-    on:
-      workflow_dispatch:
-      pull_request_target:
-        types: [closed]
-
-    jobs:
-      notify:
-        runs-on: ubuntu-latest
-        if: github.event.pull_request.merged == true
-        steps:
-        - name: Get User Permission
-          id: checkAccess
-          uses: actions-cool/check-user-permission@v2
-          with:
-            require: write
-            username: ${{ github.triggering_actor }}
-          env:
-            GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
-        - name: Check User Permission
-          if: steps.checkAccess.outputs.require-result == 'false'
-          run: |
-            echo "${{ github.triggering_actor }} does not have permissions on this repo."
-            echo "Current permission level is ${{ steps.checkAccess.outputs.user-permission }}"
-            echo "Job originally triggered by ${{ github.actor }}"
-            exit 1
-        - name: Send Discord notification
-          env:
-            PR_NUMBER: ${{ github.event.pull_request.number }}
-            PR_TITLE: ${{ github.event.pull_request.title }}
-            PR_URL: ${{ github.event.pull_request.html_url }}
-            ACTOR: ${{ github.actor }}
-          run: |
-            jq -n \
-              --arg content "Pull Request #${PR_NUMBER} \"${PR_TITLE}\" merged by ${ACTOR}
-            ${PR_URL}. It will be included in the next nightly builds, please test" \
-              '{content: $content}' \
-              | curl -H "Content-Type: application/json" -d @- ${{ secrets.DISCORD_WEBHOOK_BETA_TESTERS }}

.github/workflows/release.yml

@@ -18,19 +18,9 @@ jobs:
     - uses: actions/download-artifact@v4
       with:
         merge-multiple: true
-    - name: "✏️ Generate release changelog"
-      id: changelog
-      uses: janheinrichmerker/action-github-changelog-generator@v2.3
-      with:
-          token: ${{ secrets.GITHUB_TOKEN }} 
-          sinceTag: v0.15.0
-          maxIssues: 500
-          # Exclude issues that were closed without resolution from changelog
-          exclude-labels: 'stale,wontfix,duplicate,invalid'       
     - name: Create draft release
       uses: softprops/action-gh-release@v1
       with:
-        body: ${{ steps.changelog.outputs.changelog }}
         draft: True
         files: |
           *.bin

.github/workflows/test.yaml

@@ -1,13 +0,0 @@
-on:
-  workflow_dispatch:
-
-jobs:
-  dispatch:
-    runs-on: ubuntu-latest
-    steps:
-      - name: Repository Dispatch
-        uses: peter-evans/repository-dispatch@v3
-        with:
-          repository: wled/WLED-WebInstaller
-          event-type: release-nightly
-          token: ${{ secrets.PAT_PUBLIC }}

.github/workflows/usermods.yml

@@ -1,74 +0,0 @@
-name: Usermod CI
-
-on:
-  push:
-    paths:
-      - usermods/**
-      - .github/workflows/usermods.yml
-  pull_request:
-    paths:
-      - usermods/**
-    
-jobs:
-
-  get_usermod_envs:
-    name: Gather Usermods
-    runs-on: ubuntu-latest
-    steps:
-    - uses: actions/checkout@v4
-    - uses: actions/setup-python@v5
-      with:
-        python-version: '3.12'
-        cache: 'pip'
-    - name: Install PlatformIO
-      run: pip install -r requirements.txt
-    - name: Get default environments
-      id: envs
-      run: |
-        echo "usermods=$(find usermods/ -name library.json | xargs dirname | xargs -n 1 basename | jq -R | grep -v PWM_fan | grep -v BME68X_v2| grep -v pixels_dice_tray | jq --slurp -c)" >> $GITHUB_OUTPUT
-    outputs:
-      usermods: ${{ steps.envs.outputs.usermods }}
-
-
-  build:
-    name: Build Enviornments
-    runs-on: ubuntu-latest
-    needs: get_usermod_envs
-    strategy:
-      fail-fast: false
-      matrix:
-        usermod: ${{ fromJSON(needs.get_usermod_envs.outputs.usermods) }}
-        environment: [usermods_esp32, usermods_esp32c3, usermods_esp32s2, usermods_esp32s3]
-    steps:
-    - uses: actions/checkout@v4
-    - name: Set up Node.js
-      uses: actions/setup-node@v4
-      with:
-        node-version-file: '.nvmrc'
-        cache: 'npm'
-    - run: npm ci
-    - name: Cache PlatformIO
-      uses: actions/cache@v4
-      with:
-        path: |
-              ~/.platformio/.cache
-              ~/.buildcache
-              build_output
-        key: pio-${{ runner.os }}-${{ matrix.environment }}-${{ hashFiles('platformio.ini', 'pio-scripts/output_bins.py') }}-${{ hashFiles('wled00/**', 'usermods/**') }}
-        restore-keys: pio-${{ runner.os }}-${{ matrix.environment }}-${{ hashFiles('platformio.ini', 'pio-scripts/output_bins.py') }}-
-    - name: Set up Python
-      uses: actions/setup-python@v5
-      with:
-          python-version: '3.12'
-          cache: 'pip'
-    - name: Install PlatformIO
-      run: pip install -r requirements.txt
-    - name: Add usermods environment
-      run: |
-        cp -v usermods/platformio_override.usermods.ini platformio_override.ini
-        echo >> platformio_override.ini
-        echo  "custom_usermods = ${{ matrix.usermod }}" >> platformio_override.ini
-        cat platformio_override.ini
-
-    - name: Build firmware
-      run: pio run -e ${{ matrix.environment }}    

.gitignore

@@ -15,7 +15,6 @@ wled-update.sh
 
 /build_output/
 /node_modules/
-/logs/
 
 /wled00/extLibs
 /wled00/LittleFS

.nvmrc

@@ -1 +0,0 @@
-20.18

CHANGELOG.md

@@ -1,5 +1,23 @@
 ## WLED changelog
 
+#### Build 2412100
+-   WLED 0.15.0 release
+-   Usermod BME280: Fix "Unit of Measurement" for temperature
+-   WiFi reconnect bugfix (@blazoncek)
+
+#### Build 2411250
+-   WLED 0.15.0-rc1 release
+-   Add support for esp32S3_wroom2 (#4243 by @softhack007)
+-   Fix mixed LED SK6812 and ws2812b booloop (#4301 by @willmmiles)
+-   Improved FPS calculation (by DedeHai)
+-   Fix crashes when using HTTP API within MQTT (#4269 by @willmmiles)
+-   Fix array overflow in exploding_fireworks (#4120 by @willmmiles)
+-   Fix MQTT topic buffer length (#4293 by @WouterGritter)
+-   Fix SparkFunDMX fix for possible array bounds violation in DMX.write (by @softhack007)
+-   Allow TV Simulator on single LED segments (by @softhack007)
+-   Fix WLED_RELEASE_NAME (by @netmindz)
+
+
 #### Build 2410270
 -   WLED 0.15.0-b7 release
 -   Re-license the WLED project from MIT to EUPL (#4194 by @Aircoookie)
@@ -173,7 +191,7 @@
 -   v0.15.0-b2
 -   WS2805 support (RGB + WW + CW, 600kbps)
 -   Unified PSRAM use
--   NeoPixelBus v2.7.9 (for future WS2805 support)
+-   NeoPixelBus v2.7.9
 -   Ubiquitous PSRAM mode for all variants of ESP32
 -   SSD1309_64 I2C Support for FLD Usermod (#3836 by @THATDONFC)
 -   Palette cycling fix (add support for `{"seg":[{"pal":"X~Y~"}]}` or `{"seg":[{"pal":"X~Yr"}]}`)

CONTRIBUTING.md

@@ -14,7 +14,7 @@ A good description helps us to review and understand your proposed changes. For
 
 ### Target branch for pull requests
 
-Please make all PRs against the `main` branch.
+Please make all PRs against the `0_15` branch.
 
 ### Updating your code
 While the PR is open - and under review by maintainers - you may be asked to modify your PR source code.
@@ -27,7 +27,7 @@ Github will pick up the changes so your PR stays up-to-date.
 > For example, we regularly lost review comments when the PR author force-pushes code changes. So, pretty please, do not force-push.
 
 
-You can find a collection of very useful tips and tricks here: https://github.com/wled-dev/WLED/wiki/How-to-properly-submit-a-PR
+You can find a collection of very useful tips and tricks here: https://github.com/Aircoookie/WLED/wiki/How-to-properly-submit-a-PR
 
 
 ### Code style
@@ -105,4 +105,4 @@ Good:
 
 There is no hard character limit for a comment within a line,
 though as a rule of thumb consider wrapping after 120 characters.
-Inline comments are OK if they describe that line only and are not exceedingly wide.
+Inline comments are OK if they describe that line only and are not exceedingly wide.

boards/lolin_s3_mini.json

@@ -1,47 +0,0 @@
-{
-    "build": {
-      "arduino": {
-        "ldscript": "esp32s3_out.ld",
-        "memory_type": "qio_qspi"
-      },
-      "core": "esp32",
-      "extra_flags": [
-        "-DBOARD_HAS_PSRAM",
-        "-DARDUINO_LOLIN_S3_MINI",
-        "-DARDUINO_USB_MODE=1"
-      ],
-      "f_cpu": "240000000L",
-      "f_flash": "80000000L",
-      "flash_mode": "qio",
-      "hwids": [
-        [
-          "0x303A",
-          "0x8167"
-        ]
-      ],
-      "mcu": "esp32s3",
-      "variant": "lolin_s3_mini"
-    },
-    "connectivity": [
-      "bluetooth",
-      "wifi"
-    ],
-    "debug": {
-      "openocd_target": "esp32s3.cfg"
-    },
-    "frameworks": [
-      "arduino",
-      "espidf"
-    ],
-    "name": "WEMOS LOLIN S3 Mini",
-    "upload": {
-      "flash_size": "4MB",
-      "maximum_ram_size": 327680,
-      "maximum_size": 4194304,
-      "require_upload_port": true,
-      "speed": 460800
-    },
-    "url": "https://www.wemos.cc/en/latest/s3/index.html",
-    "vendor": "WEMOS"
-}
-  

lib/ESP8266PWM/src/core_esp8266_waveform_phase.cpp

@@ -1,504 +0,0 @@
-/* esp8266_waveform imported from platform source code
-   Modified for WLED to work around a fault in the NMI handling,
-   which can result in the system locking up and hard WDT crashes.
-
-   Imported from https://github.com/esp8266/Arduino/blob/7e0d20e2b9034994f573a236364e0aef17fd66de/cores/esp8266/core_esp8266_waveform_phase.cpp
-*/
-
-
-/*
-  esp8266_waveform - General purpose waveform generation and control,
-                     supporting outputs on all pins in parallel.
-
-  Copyright (c) 2018 Earle F. Philhower, III.  All rights reserved.
-  Copyright (c) 2020 Dirk O. Kaar.
-
-  The core idea is to have a programmable waveform generator with a unique
-  high and low period (defined in microseconds or CPU clock cycles).  TIMER1 is
-  set to 1-shot mode and is always loaded with the time until the next edge
-  of any live waveforms.
-
-  Up to one waveform generator per pin supported.
-
-  Each waveform generator is synchronized to the ESP clock cycle counter, not the
-  timer.  This allows for removing interrupt jitter and delay as the counter
-  always increments once per 80MHz clock.  Changes to a waveform are
-  contiguous and only take effect on the next waveform transition,
-  allowing for smooth transitions.
-
-  This replaces older tone(), analogWrite(), and the Servo classes.
-
-  Everywhere in the code where "ccy" or "ccys" is used, it means ESP.getCycleCount()
-  clock cycle time, or an interval measured in clock cycles, but not TIMER1
-  cycles (which may be 2 CPU clock cycles @ 160MHz).
-
-  This library is free software; you can redistribute it and/or
-  modify it under the terms of the GNU Lesser General Public
-  License as published by the Free Software Foundation; either
-  version 2.1 of the License, or (at your option) any later version.
-
-  This library is distributed in the hope that it will be useful,
-  but WITHOUT ANY WARRANTY; without even the implied warranty of
-  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-  Lesser General Public License for more details.
-
-  You should have received a copy of the GNU Lesser General Public
-  License along with this library; if not, write to the Free Software
-  Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-*/
-
-#include "core_esp8266_waveform.h"
-#include <Arduino.h>
-#include "debug.h"
-#include "ets_sys.h"
-#include <atomic>
-
-
-// ----- @willmmiles begin patch -----
-// Linker magic
-extern "C" void usePWMFixedNMI(void) {};
-
-// NMI crash workaround
-// Sometimes the NMI fails to return, stalling the CPU.  When this happens,
-// the next NMI gets a return address /inside the NMI handler function/.
-// We work around this by caching the last NMI return address, and restoring
-// the epc3 and eps3 registers to the previous values if the observed epc3
-// happens to be pointing to the _NMILevelVector function.
-extern "C" void _NMILevelVector();
-extern "C" void _UserExceptionVector_1(); // the next function after _NMILevelVector
-static inline IRAM_ATTR void nmiCrashWorkaround() {
-  static uintptr_t epc3_backup, eps3_backup;
-
-  uintptr_t epc3, eps3;
-  __asm__ __volatile__("rsr %0,epc3; rsr %1,eps3":"=a"(epc3),"=a" (eps3));
-  if ((epc3 < (uintptr_t) &_NMILevelVector) || (epc3 >= (uintptr_t) &_UserExceptionVector_1)) {
-    // Address is good; save backup
-    epc3_backup = epc3;
-    eps3_backup = eps3;
-  } else {
-    // Address is inside the NMI handler -- restore from backup
-    __asm__ __volatile__("wsr %0,epc3; wsr %1,eps3"::"a"(epc3_backup),"a"(eps3_backup));
-  }
-}
-// ----- @willmmiles end patch -----
-
-
-// No-op calls to override the PWM implementation
-extern "C" void _setPWMFreq_weak(uint32_t freq) { (void) freq; }
-extern "C" IRAM_ATTR bool _stopPWM_weak(int pin) { (void) pin; return false; }
-extern "C" bool _setPWM_weak(int pin, uint32_t val, uint32_t range) { (void) pin; (void) val; (void) range; return false; }
-
-
-// Timer is 80MHz fixed. 160MHz CPU frequency need scaling.
-constexpr bool ISCPUFREQ160MHZ = clockCyclesPerMicrosecond() == 160;
-// Maximum delay between IRQs, Timer1, <= 2^23 / 80MHz
-constexpr int32_t MAXIRQTICKSCCYS = microsecondsToClockCycles(10000);
-// Maximum servicing time for any single IRQ
-constexpr uint32_t ISRTIMEOUTCCYS = microsecondsToClockCycles(18);
-// The latency between in-ISR rearming of the timer and the earliest firing
-constexpr int32_t IRQLATENCYCCYS = microsecondsToClockCycles(2);
-// The SDK and hardware take some time to actually get to our NMI code
-constexpr int32_t DELTAIRQCCYS = ISCPUFREQ160MHZ ?
-  microsecondsToClockCycles(2) >> 1 : microsecondsToClockCycles(2);
-
-// for INFINITE, the NMI proceeds on the waveform without expiry deadline.
-// for EXPIRES, the NMI expires the waveform automatically on the expiry ccy.
-// for UPDATEEXPIRY, the NMI recomputes the exact expiry ccy and transitions to EXPIRES.
-// for UPDATEPHASE, the NMI recomputes the target timings
-// for INIT, the NMI initializes nextPeriodCcy, and if expiryCcy != 0 includes UPDATEEXPIRY.
-enum class WaveformMode : uint8_t {INFINITE = 0, EXPIRES = 1, UPDATEEXPIRY = 2, UPDATEPHASE = 3, INIT = 4};
-
-// Waveform generator can create tones, PWM, and servos
-typedef struct {
-  uint32_t nextPeriodCcy; // ESP clock cycle when a period begins.
-  uint32_t endDutyCcy;    // ESP clock cycle when going from duty to off
-  int32_t dutyCcys;       // Set next off cycle at low->high to maintain phase
-  int32_t adjDutyCcys;    // Temporary correction for next period
-  int32_t periodCcys;     // Set next phase cycle at low->high to maintain phase
-  uint32_t expiryCcy;     // For time-limited waveform, the CPU clock cycle when this waveform must stop. If WaveformMode::UPDATE, temporarily holds relative ccy count
-  WaveformMode mode;
-  bool autoPwm;           // perform PWM duty to idle cycle ratio correction under high load at the expense of precise timings
-} Waveform;
-
-namespace {
-
-  static struct {
-    Waveform pins[17];             // State of all possible pins
-    uint32_t states = 0;           // Is the pin high or low, updated in NMI so no access outside the NMI code
-    uint32_t enabled = 0; // Is it actively running, updated in NMI so no access outside the NMI code
-
-    // Enable lock-free by only allowing updates to waveform.states and waveform.enabled from IRQ service routine
-    int32_t toSetBits = 0;     // Message to the NMI handler to start/modify exactly one waveform
-    int32_t toDisableBits = 0; // Message to the NMI handler to disable exactly one pin from waveform generation
-
-    // toSetBits temporaries
-    // cheaper than packing them in every Waveform, since we permit only one use at a time
-    uint32_t phaseCcy;      // positive phase offset ccy count  
-    int8_t alignPhase;      // < 0 no phase alignment, otherwise starts waveform in relative phase offset to given pin
-
-    uint32_t(*timer1CB)() = nullptr;
-
-    bool timer1Running = false;
-
-    uint32_t nextEventCcy;
-  } waveform;
-
-}
-
-// Interrupt on/off control
-static IRAM_ATTR void timer1Interrupt();
-
-// Non-speed critical bits
-#pragma GCC optimize ("Os")
-
-static void initTimer() {
-  timer1_disable();
-  ETS_FRC_TIMER1_INTR_ATTACH(NULL, NULL);
-  ETS_FRC_TIMER1_NMI_INTR_ATTACH(timer1Interrupt);
-  timer1_enable(TIM_DIV1, TIM_EDGE, TIM_SINGLE);
-  waveform.timer1Running = true;
-  timer1_write(IRQLATENCYCCYS); // Cause an interrupt post-haste
-}
-
-static void IRAM_ATTR deinitTimer() {
-  ETS_FRC_TIMER1_NMI_INTR_ATTACH(NULL);
-  timer1_disable();
-  timer1_isr_init();
-  waveform.timer1Running = false;
-}
-
-extern "C" {
-
-// Set a callback.  Pass in NULL to stop it
-void setTimer1Callback_weak(uint32_t (*fn)()) {
-  waveform.timer1CB = fn;
-  std::atomic_thread_fence(std::memory_order_acq_rel);
-  if (!waveform.timer1Running && fn) {
-    initTimer();
-  } else if (waveform.timer1Running && !fn && !waveform.enabled) {
-    deinitTimer();
-  }
-}
-
-// Start up a waveform on a pin, or change the current one.  Will change to the new
-// waveform smoothly on next low->high transition.  For immediate change, stopWaveform()
-// first, then it will immediately begin.
-int startWaveformClockCycles_weak(uint8_t pin, uint32_t highCcys, uint32_t lowCcys,
-  uint32_t runTimeCcys, int8_t alignPhase, uint32_t phaseOffsetCcys, bool autoPwm) {
-  uint32_t periodCcys = highCcys + lowCcys;
-  if (periodCcys < MAXIRQTICKSCCYS) {
-    if (!highCcys) {
-      periodCcys = (MAXIRQTICKSCCYS / periodCcys) * periodCcys;
-    }
-    else if (!lowCcys) {
-      highCcys = periodCcys = (MAXIRQTICKSCCYS / periodCcys) * periodCcys;
-    }
-  }
-  // sanity checks, including mixed signed/unsigned arithmetic safety
-  if ((pin > 16) || isFlashInterfacePin(pin) || (alignPhase > 16) ||
-    static_cast<int32_t>(periodCcys) <= 0 ||
-    static_cast<int32_t>(highCcys) < 0 || static_cast<int32_t>(lowCcys) < 0) {
-    return false;
-  }
-  Waveform& wave = waveform.pins[pin];
-  wave.dutyCcys = highCcys;
-  wave.adjDutyCcys = 0;
-  wave.periodCcys = periodCcys;
-  wave.autoPwm = autoPwm;
-  waveform.alignPhase = (alignPhase < 0) ? -1 : alignPhase;
-  waveform.phaseCcy = phaseOffsetCcys;
-
-  std::atomic_thread_fence(std::memory_order_acquire);
-  const uint32_t pinBit = 1UL << pin;
-  if (!(waveform.enabled & pinBit)) {
-    // wave.nextPeriodCcy and wave.endDutyCcy are initialized by the ISR
-    wave.expiryCcy = runTimeCcys; // in WaveformMode::INIT, temporarily hold relative cycle count
-    wave.mode = WaveformMode::INIT;
-    if (!wave.dutyCcys) {
-      // If initially at zero duty cycle, force GPIO off
-      if (pin == 16) {
-        GP16O = 0;
-      }
-      else {
-        GPOC = pinBit;
-      }
-    }
-    std::atomic_thread_fence(std::memory_order_release);
-    waveform.toSetBits = 1UL << pin;
-    std::atomic_thread_fence(std::memory_order_release);
-    if (!waveform.timer1Running) {
-      initTimer();
-    }
-    else if (T1V > IRQLATENCYCCYS) {
-      // Must not interfere if Timer is due shortly
-      timer1_write(IRQLATENCYCCYS);
-    }
-  }
-  else {
-    wave.mode = WaveformMode::INFINITE; // turn off possible expiry to make update atomic from NMI
-    std::atomic_thread_fence(std::memory_order_release);
-    if (runTimeCcys) {
-      wave.expiryCcy = runTimeCcys; // in WaveformMode::UPDATEEXPIRY, temporarily hold relative cycle count
-      wave.mode = WaveformMode::UPDATEEXPIRY;
-      std::atomic_thread_fence(std::memory_order_release);
-      waveform.toSetBits = 1UL << pin;
-    } else if (alignPhase >= 0) {
-      // @willmmiles new feature
-      wave.mode = WaveformMode::UPDATEPHASE; // recalculate start
-      std::atomic_thread_fence(std::memory_order_release);
-      waveform.toSetBits = 1UL << pin;
-    }
-  }
-  std::atomic_thread_fence(std::memory_order_acq_rel);
-  while (waveform.toSetBits) {
-    esp_yield(); // Wait for waveform to update
-    std::atomic_thread_fence(std::memory_order_acquire);
-  }
-  return true;
-}
-
-// Stops a waveform on a pin
-IRAM_ATTR int stopWaveform_weak(uint8_t pin) {
-  // Can't possibly need to stop anything if there is no timer active
-  if (!waveform.timer1Running) {
-    return false;
-  }
-  // If user sends in a pin >16 but <32, this will always point to a 0 bit
-  // If they send >=32, then the shift will result in 0 and it will also return false
-  std::atomic_thread_fence(std::memory_order_acquire);
-  const uint32_t pinBit = 1UL << pin;
-  if (waveform.enabled & pinBit) {
-    waveform.toDisableBits = 1UL << pin;
-    std::atomic_thread_fence(std::memory_order_release);
-    // Must not interfere if Timer is due shortly
-    if (T1V > IRQLATENCYCCYS) {
-      timer1_write(IRQLATENCYCCYS);
-    }
-    while (waveform.toDisableBits) {
-      /* no-op */ // Can't delay() since stopWaveform may be called from an IRQ
-      std::atomic_thread_fence(std::memory_order_acquire);
-    }
-  }
-  if (!waveform.enabled && !waveform.timer1CB) {
-    deinitTimer();
-  }
-  return true;
-}
-
-};
-
-// Speed critical bits
-#pragma GCC optimize ("O2")
-
-// For dynamic CPU clock frequency switch in loop the scaling logic would have to be adapted.
-// Using constexpr makes sure that the CPU clock frequency is compile-time fixed.
-static inline IRAM_ATTR int32_t scaleCcys(const int32_t ccys, const bool isCPU2X) {
-  if (ISCPUFREQ160MHZ) {
-    return isCPU2X ? ccys : (ccys >> 1);
-  }
-  else {
-    return isCPU2X ? (ccys << 1) : ccys;
-  }
-}
-
-static IRAM_ATTR void timer1Interrupt() {
-  const uint32_t isrStartCcy = ESP.getCycleCount();
-  //int32_t clockDrift = isrStartCcy - waveform.nextEventCcy;
-
-  // ----- @willmmiles begin patch -----
-  nmiCrashWorkaround();
-  // ----- @willmmiles end patch -----
-
-  const bool isCPU2X = CPU2X & 1;
-  if ((waveform.toSetBits && !(waveform.enabled & waveform.toSetBits)) || waveform.toDisableBits) {
-    // Handle enable/disable requests from main app.
-    waveform.enabled = (waveform.enabled & ~waveform.toDisableBits) | waveform.toSetBits; // Set the requested waveforms on/off
-    // Find the first GPIO being generated by checking GCC's find-first-set (returns 1 + the bit of the first 1 in an int32_t)
-    waveform.toDisableBits = 0;
-  }
-
-  if (waveform.toSetBits) {
-    const int toSetPin = __builtin_ffs(waveform.toSetBits) - 1;
-    Waveform& wave = waveform.pins[toSetPin];
-    switch (wave.mode) {
-    case WaveformMode::INIT:
-      waveform.states &= ~waveform.toSetBits; // Clear the state of any just started
-      if (waveform.alignPhase >= 0 && waveform.enabled & (1UL << waveform.alignPhase)) {
-        wave.nextPeriodCcy = waveform.pins[waveform.alignPhase].nextPeriodCcy + scaleCcys(waveform.phaseCcy, isCPU2X);
-      }
-      else {
-        wave.nextPeriodCcy = waveform.nextEventCcy;
-      }
-      if (!wave.expiryCcy) {
-        wave.mode = WaveformMode::INFINITE;
-        break;
-      }
-      // fall through
-    case WaveformMode::UPDATEEXPIRY:
-      // in WaveformMode::UPDATEEXPIRY, expiryCcy temporarily holds relative CPU cycle count
-      wave.expiryCcy = wave.nextPeriodCcy + scaleCcys(wave.expiryCcy, isCPU2X);
-      wave.mode = WaveformMode::EXPIRES;
-      break;
-    // @willmmiles new feature
-    case WaveformMode::UPDATEPHASE:
-      // in WaveformMode::UPDATEPHASE, we recalculate the targets
-      if ((waveform.alignPhase >= 0) && (waveform.enabled & (1UL << waveform.alignPhase))) {
-        // Compute phase shift to realign with target
-        auto const newPeriodCcy = waveform.pins[waveform.alignPhase].nextPeriodCcy + scaleCcys(waveform.phaseCcy, isCPU2X);
-        auto const period = scaleCcys(wave.periodCcys, isCPU2X);
-        auto shift = ((static_cast<int32_t> (newPeriodCcy - wave.nextPeriodCcy) + period/2) % period) - (period/2);
-        wave.nextPeriodCcy += static_cast<uint32_t>(shift);
-        if (static_cast<int32_t>(wave.endDutyCcy - wave.nextPeriodCcy) > 0) {
-          wave.endDutyCcy = wave.nextPeriodCcy;
-        }
-      }
-    default:
-      break;
-    }
-    waveform.toSetBits = 0;
-  }
-
-  // Exit the loop if the next event, if any, is sufficiently distant.
-  const uint32_t isrTimeoutCcy = isrStartCcy + ISRTIMEOUTCCYS;
-  uint32_t busyPins = waveform.enabled;
-  waveform.nextEventCcy = isrStartCcy + MAXIRQTICKSCCYS;
-
-  uint32_t now = ESP.getCycleCount();
-  uint32_t isrNextEventCcy = now;
-  while (busyPins) {
-    if (static_cast<int32_t>(isrNextEventCcy - now) > IRQLATENCYCCYS) {
-      waveform.nextEventCcy = isrNextEventCcy;
-      break;
-    }
-    isrNextEventCcy = waveform.nextEventCcy;
-    uint32_t loopPins = busyPins;
-    while (loopPins) {
-      const int pin = __builtin_ffsl(loopPins) - 1;
-      const uint32_t pinBit = 1UL << pin;
-      loopPins ^= pinBit;
-
-      Waveform& wave = waveform.pins[pin];
-
-/* @willmmiles - wtf?  We don't want to accumulate drift
-      if (clockDrift) {
-        wave.endDutyCcy += clockDrift;
-        wave.nextPeriodCcy += clockDrift;
-        wave.expiryCcy += clockDrift;
-      }
-*/          
-
-      uint32_t waveNextEventCcy = (waveform.states & pinBit) ? wave.endDutyCcy : wave.nextPeriodCcy;
-      if (WaveformMode::EXPIRES == wave.mode &&
-        static_cast<int32_t>(waveNextEventCcy - wave.expiryCcy) >= 0 &&
-        static_cast<int32_t>(now - wave.expiryCcy) >= 0) {
-        // Disable any waveforms that are done
-        waveform.enabled ^= pinBit;
-        busyPins ^= pinBit;
-      }
-      else {
-        const int32_t overshootCcys = now - waveNextEventCcy;
-        if (overshootCcys >= 0) {
-          const int32_t periodCcys = scaleCcys(wave.periodCcys, isCPU2X);
-          if (waveform.states & pinBit) {
-            // active configuration and forward are 100% duty
-            if (wave.periodCcys == wave.dutyCcys) {
-              wave.nextPeriodCcy += periodCcys;
-              wave.endDutyCcy = wave.nextPeriodCcy;
-            }
-            else {
-              if (wave.autoPwm) {
-                wave.adjDutyCcys += overshootCcys;
-              }
-              waveform.states ^= pinBit;
-              if (16 == pin) {
-                GP16O = 0;
-              }
-              else {
-                GPOC = pinBit;
-              }
-            }
-            waveNextEventCcy = wave.nextPeriodCcy;
-          }
-          else {
-            wave.nextPeriodCcy += periodCcys;
-            if (!wave.dutyCcys) {
-              wave.endDutyCcy = wave.nextPeriodCcy;
-            }
-            else {
-              int32_t dutyCcys = scaleCcys(wave.dutyCcys, isCPU2X);
-              if (dutyCcys <= wave.adjDutyCcys) {
-                dutyCcys >>= 1;
-                wave.adjDutyCcys -= dutyCcys;
-              }
-              else if (wave.adjDutyCcys) {
-                dutyCcys -= wave.adjDutyCcys;
-                wave.adjDutyCcys = 0;
-              }
-              wave.endDutyCcy = now + dutyCcys;
-              if (static_cast<int32_t>(wave.endDutyCcy - wave.nextPeriodCcy) > 0) {
-                wave.endDutyCcy = wave.nextPeriodCcy;
-              }
-              waveform.states |= pinBit;
-              if (16 == pin) {
-                GP16O = 1;
-              }
-              else {
-                GPOS = pinBit;
-              }
-            }
-            waveNextEventCcy = wave.endDutyCcy;
-          }
-
-          if (WaveformMode::EXPIRES == wave.mode && static_cast<int32_t>(waveNextEventCcy - wave.expiryCcy) > 0) {
-            waveNextEventCcy = wave.expiryCcy;
-          }
-        }
-
-        if (static_cast<int32_t>(waveNextEventCcy - isrTimeoutCcy) >= 0) {
-          busyPins ^= pinBit;
-          if (static_cast<int32_t>(waveform.nextEventCcy - waveNextEventCcy) > 0) {
-            waveform.nextEventCcy = waveNextEventCcy;
-          }
-        }
-        else if (static_cast<int32_t>(isrNextEventCcy - waveNextEventCcy) > 0) {
-          isrNextEventCcy = waveNextEventCcy;
-        }
-      }
-      now = ESP.getCycleCount();
-    }
-    //clockDrift = 0;
-  }
-
-  int32_t callbackCcys = 0;
-  if (waveform.timer1CB) {
-    callbackCcys = scaleCcys(waveform.timer1CB(), isCPU2X);
-  }
-  now = ESP.getCycleCount();
-  int32_t nextEventCcys = waveform.nextEventCcy - now;
-  // Account for unknown duration of timer1CB().
-  if (waveform.timer1CB && nextEventCcys > callbackCcys) {
-    waveform.nextEventCcy = now + callbackCcys;
-    nextEventCcys = callbackCcys;
-  }
-
-  // Timer is 80MHz fixed. 160MHz CPU frequency need scaling.
-  int32_t deltaIrqCcys = DELTAIRQCCYS;
-  int32_t irqLatencyCcys = IRQLATENCYCCYS;
-  if (isCPU2X) {
-    nextEventCcys >>= 1;
-    deltaIrqCcys >>= 1;
-    irqLatencyCcys >>= 1;
-  }
-
-  // Firing timer too soon, the NMI occurs before ISR has returned.
-  if (nextEventCcys < irqLatencyCcys + deltaIrqCcys) {
-    waveform.nextEventCcy = now + IRQLATENCYCCYS + DELTAIRQCCYS;
-    nextEventCcys = irqLatencyCcys;
-  }
-  else {
-    nextEventCcys -= deltaIrqCcys;
-  }
-
-  // Register access is fast and edge IRQ was configured before.
-  T1L = nextEventCcys;
-}

lib/ESP8266PWM/src/core_esp8266_waveform_pwm.cpp

@@ -0,0 +1,717 @@
+/* esp8266_waveform imported from platform source code
+   Modified for WLED to work around a fault in the NMI handling,
+   which can result in the system locking up and hard WDT crashes.
+
+   Imported from https://github.com/esp8266/Arduino/blob/7e0d20e2b9034994f573a236364e0aef17fd66de/cores/esp8266/core_esp8266_waveform_pwm.cpp
+*/
+
+/*
+  esp8266_waveform - General purpose waveform generation and control,
+                     supporting outputs on all pins in parallel.
+
+  Copyright (c) 2018 Earle F. Philhower, III.  All rights reserved.
+
+  The core idea is to have a programmable waveform generator with a unique
+  high and low period (defined in microseconds or CPU clock cycles).  TIMER1
+  is set to 1-shot mode and is always loaded with the time until the next
+  edge of any live waveforms.
+
+  Up to one waveform generator per pin supported.
+
+  Each waveform generator is synchronized to the ESP clock cycle counter, not
+  the timer.  This allows for removing interrupt jitter and delay as the
+  counter always increments once per 80MHz clock.  Changes to a waveform are
+  contiguous and only take effect on the next waveform transition,
+  allowing for smooth transitions.
+
+  This replaces older tone(), analogWrite(), and the Servo classes.
+
+  Everywhere in the code where "cycles" is used, it means ESP.getCycleCount()
+  clock cycle count, or an interval measured in CPU clock cycles, but not
+  TIMER1 cycles (which may be 2 CPU clock cycles @ 160MHz).
+
+  This library is free software; you can redistribute it and/or
+  modify it under the terms of the GNU Lesser General Public
+  License as published by the Free Software Foundation; either
+  version 2.1 of the License, or (at your option) any later version.
+
+  This library is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+  Lesser General Public License for more details.
+
+  You should have received a copy of the GNU Lesser General Public
+  License along with this library; if not, write to the Free Software
+  Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+*/
+
+
+#include <Arduino.h>
+#include <coredecls.h>
+#include "ets_sys.h"
+#include "core_esp8266_waveform.h"
+#include "user_interface.h"
+
+extern "C" {
+
+// Linker magic
+void usePWMFixedNMI() {};
+
+// Maximum delay between IRQs
+#define MAXIRQUS (10000)
+
+// Waveform generator can create tones, PWM, and servos
+typedef struct {
+  uint32_t nextServiceCycle;   // ESP cycle timer when a transition required
+  uint32_t expiryCycle;        // For time-limited waveform, the cycle when this waveform must stop
+  uint32_t timeHighCycles;     // Actual running waveform period (adjusted using desiredCycles)
+  uint32_t timeLowCycles;      //
+  uint32_t desiredHighCycles;  // Ideal waveform period to drive the error signal
+  uint32_t desiredLowCycles;   //
+  uint32_t lastEdge;           // Cycle when this generator last changed
+} Waveform;
+
+class WVFState {
+public:
+  Waveform waveform[17];        // State of all possible pins
+  uint32_t waveformState = 0;   // Is the pin high or low, updated in NMI so no access outside the NMI code
+  uint32_t waveformEnabled = 0; // Is it actively running, updated in NMI so no access outside the NMI code
+
+  // Enable lock-free by only allowing updates to waveformState and waveformEnabled from IRQ service routine
+  uint32_t waveformToEnable = 0;  // Message to the NMI handler to start a waveform on a inactive pin
+  uint32_t waveformToDisable = 0; // Message to the NMI handler to disable a pin from waveform generation
+
+  uint32_t waveformToChange = 0; // Mask of pin to change. One bit set in main app, cleared when effected in the NMI
+  uint32_t waveformNewHigh = 0;
+  uint32_t waveformNewLow = 0;
+
+  uint32_t (*timer1CB)() = NULL;
+
+  // Optimize the NMI inner loop by keeping track of the min and max GPIO that we
+  // are generating.  In the common case (1 PWM) these may be the same pin and
+  // we can avoid looking at the other pins.
+  uint16_t startPin = 0;
+  uint16_t endPin = 0;
+};
+static WVFState wvfState;
+
+
+// Ensure everything is read/written to RAM
+#define MEMBARRIER() { __asm__ volatile("" ::: "memory"); }
+
+// Non-speed critical bits
+#pragma GCC optimize ("Os")
+
+// Interrupt on/off control
+static IRAM_ATTR void timer1Interrupt();
+static bool timerRunning = false;
+
+static __attribute__((noinline)) void initTimer() {
+  if (!timerRunning) {
+    timer1_disable();
+    ETS_FRC_TIMER1_INTR_ATTACH(NULL, NULL);
+    ETS_FRC_TIMER1_NMI_INTR_ATTACH(timer1Interrupt);
+    timer1_enable(TIM_DIV1, TIM_EDGE, TIM_SINGLE);
+    timerRunning = true;
+    timer1_write(microsecondsToClockCycles(10));
+  }
+}
+
+static IRAM_ATTR void forceTimerInterrupt() {
+  if (T1L > microsecondsToClockCycles(10)) {
+    T1L = microsecondsToClockCycles(10);
+  }
+}
+
+// PWM implementation using special purpose state machine
+//
+// Keep an ordered list of pins with the delta in cycles between each
+// element, with a terminal entry making up the remainder of the PWM
+// period.  With this method sum(all deltas) == PWM period clock cycles.
+//
+// At t=0 set all pins high and set the timeout for the 1st edge.
+// On interrupt, if we're at the last element reset to t=0 state
+// Otherwise, clear that pin down and set delay for next element
+// and so forth.
+
+constexpr int maxPWMs = 8;
+
+// PWM machine state
+typedef struct PWMState {
+  uint32_t mask; // Bitmask of active pins
+  uint32_t cnt;  // How many entries
+  uint32_t idx;  // Where the state machine is along the list
+  uint8_t  pin[maxPWMs + 1];
+  uint32_t delta[maxPWMs + 1];
+  uint32_t nextServiceCycle;  // Clock cycle for next step
+  struct PWMState *pwmUpdate; // Set by main code, cleared by ISR
+} PWMState;
+
+static PWMState pwmState;
+static uint32_t _pwmFreq = 1000;
+static uint32_t _pwmPeriod = microsecondsToClockCycles(1000000UL) / _pwmFreq;
+
+
+// If there are no more scheduled activities, shut down Timer 1.
+// Otherwise, do nothing.
+static IRAM_ATTR void disableIdleTimer() {
+ if (timerRunning && !wvfState.waveformEnabled && !pwmState.cnt && !wvfState.timer1CB) {
+    ETS_FRC_TIMER1_NMI_INTR_ATTACH(NULL);
+    timer1_disable();
+    timer1_isr_init();
+    timerRunning = false;
+  }
+}
+
+// Notify the NMI that a new PWM state is available through the mailbox.
+// Wait for mailbox to be emptied (either busy or delay() as needed)
+static IRAM_ATTR void _notifyPWM(PWMState *p, bool idle) {
+  p->pwmUpdate = nullptr;
+  pwmState.pwmUpdate = p;
+  MEMBARRIER();
+  forceTimerInterrupt();
+  while (pwmState.pwmUpdate) {
+    if (idle) {
+      esp_yield();
+    }
+    MEMBARRIER();
+  }
+}
+
+static void _addPWMtoList(PWMState &p, int pin, uint32_t val, uint32_t range);
+
+
+// Called when analogWriteFreq() changed to update the PWM total period
+//extern void _setPWMFreq_weak(uint32_t freq) __attribute__((weak)); 
+void _setPWMFreq_weak(uint32_t freq) {
+  _pwmFreq = freq;
+
+  // Convert frequency into clock cycles
+  uint32_t cc = microsecondsToClockCycles(1000000UL) / freq;
+
+  // Simple static adjustment to bring period closer to requested due to overhead
+  // Empirically determined as a constant PWM delay and a function of the number of PWMs
+#if F_CPU == 80000000
+  cc -= ((microsecondsToClockCycles(pwmState.cnt) * 13) >> 4) + 110;
+#else
+  cc -= ((microsecondsToClockCycles(pwmState.cnt) * 10) >> 4) + 75;
+#endif
+
+  if (cc == _pwmPeriod) {
+    return; // No change
+  }
+
+  _pwmPeriod = cc;
+
+  if (pwmState.cnt) {
+    PWMState p;  // The working copy since we can't edit the one in use
+    p.mask = 0;
+    p.cnt = 0;
+    for (uint32_t i = 0; i < pwmState.cnt; i++) {
+      auto pin = pwmState.pin[i];
+      _addPWMtoList(p, pin, wvfState.waveform[pin].desiredHighCycles, wvfState.waveform[pin].desiredLowCycles);
+    }
+    // Update and wait for mailbox to be emptied
+    initTimer();
+    _notifyPWM(&p, true);
+    disableIdleTimer();
+  }
+}
+/*
+static void _setPWMFreq_bound(uint32_t freq) __attribute__((weakref("_setPWMFreq_weak")));
+void _setPWMFreq(uint32_t freq) { 
+  _setPWMFreq_bound(freq);
+}
+*/
+
+// Helper routine to remove an entry from the state machine
+// and clean up any marked-off entries
+static void _cleanAndRemovePWM(PWMState *p, int pin) {
+  uint32_t leftover = 0;
+  uint32_t in, out;
+  for (in = 0, out = 0; in < p->cnt; in++) {
+    if ((p->pin[in] != pin) && (p->mask & (1<<p->pin[in]))) {
+        p->pin[out] = p->pin[in];
+        p->delta[out] = p->delta[in] + leftover;
+        leftover = 0;
+        out++;
+    } else {
+        leftover += p->delta[in];
+        p->mask &= ~(1<<p->pin[in]);
+    }
+  }
+  p->cnt = out;
+  // Final pin is never used: p->pin[out] = 0xff;
+  p->delta[out] = p->delta[in] + leftover;
+}
+
+
+// Disable PWM on a specific pin (i.e. when a digitalWrite or analogWrite(0%/100%))
+//extern bool _stopPWM_weak(uint8_t pin) __attribute__((weak));
+IRAM_ATTR bool _stopPWM_weak(uint8_t pin) {
+  if (!((1<<pin) & pwmState.mask)) {
+    return false; // Pin not actually active
+  }
+
+  PWMState p;  // The working copy since we can't edit the one in use
+  p = pwmState;
+
+  // In _stopPWM we just clear the mask but keep everything else
+  // untouched to save IRAM.  The main startPWM will handle cleanup.
+  p.mask &= ~(1<<pin);
+  if (!p.mask) {
+    // If all have been stopped, then turn PWM off completely
+    p.cnt = 0;
+  }
+
+  // Update and wait for mailbox to be emptied, no delay (could be in ISR)
+  _notifyPWM(&p, false);
+  // Possibly shut down the timer completely if we're done
+  disableIdleTimer();
+  return true;
+}
+/*
+static bool _stopPWM_bound(uint8_t pin) __attribute__((weakref("_stopPWM_weak")));
+IRAM_ATTR bool _stopPWM(uint8_t pin) {
+  return _stopPWM_bound(pin);
+}
+*/
+
+static void _addPWMtoList(PWMState &p, int pin, uint32_t val, uint32_t range) {
+  // Stash the val and range so we can re-evaluate the fraction
+  // should the user change PWM frequency.  This allows us to
+  // give as great a precision as possible.  We know by construction
+  // that the waveform for this pin will be inactive so we can borrow
+  // memory from that structure.
+  wvfState.waveform[pin].desiredHighCycles = val;  // Numerator == high
+  wvfState.waveform[pin].desiredLowCycles = range; // Denominator == low
+
+  uint32_t cc = (_pwmPeriod * val) / range;
+
+  // Clip to sane values in the case we go from OK to not-OK when adjusting frequencies
+  if (cc == 0) {
+    cc = 1;
+  } else if (cc >= _pwmPeriod) {
+    cc = _pwmPeriod - 1;
+  }
+
+  if (p.cnt == 0) {
+    // Starting up from scratch, special case 1st element and PWM period
+    p.pin[0] = pin;
+    p.delta[0] = cc;
+   // Final pin is never used: p.pin[1] = 0xff;
+    p.delta[1] = _pwmPeriod - cc;
+  } else {
+    uint32_t ttl = 0;
+    uint32_t i;
+    // Skip along until we're at the spot to insert
+    for (i=0; (i <= p.cnt) && (ttl + p.delta[i] < cc); i++) {
+      ttl += p.delta[i];
+    }
+    // Shift everything out by one to make space for new edge
+    for (int32_t j = p.cnt; j >= (int)i; j--) {
+      p.pin[j + 1] = p.pin[j];
+      p.delta[j + 1] = p.delta[j];
+    }
+    int off = cc - ttl; // The delta from the last edge to the one we're inserting
+    p.pin[i] = pin;
+    p.delta[i] = off; // Add the delta to this new pin
+    p.delta[i + 1] -= off; // And subtract it from the follower to keep sum(deltas) constant
+  }
+  p.cnt++;
+  p.mask |= 1<<pin;
+}
+
+// Called by analogWrite(1...99%) to set the PWM duty in clock cycles
+//extern bool _setPWM_weak(int pin, uint32_t val, uint32_t range) __attribute__((weak));
+bool _setPWM_weak(int pin, uint32_t val, uint32_t range) {
+  stopWaveform(pin);
+  PWMState p;  // Working copy
+  p = pwmState;
+  // Get rid of any entries for this pin
+  _cleanAndRemovePWM(&p, pin);
+  // And add it to the list, in order
+  if (p.cnt >= maxPWMs) {
+    return false; // No space left
+  }
+
+  // Sanity check for all-on/off
+  uint32_t cc = (_pwmPeriod * val) / range;
+  if ((cc == 0) || (cc >= _pwmPeriod)) {
+    digitalWrite(pin, cc ? HIGH : LOW);
+    return true;
+  }
+
+  _addPWMtoList(p, pin, val, range);
+
+  // Set mailbox and wait for ISR to copy it over
+  initTimer();
+  _notifyPWM(&p, true);
+  disableIdleTimer();
+
+  // Potentially recalculate the PWM period if we've added another pin
+  _setPWMFreq(_pwmFreq);
+
+  return true;
+}
+/*
+static bool _setPWM_bound(int pin, uint32_t val, uint32_t range) __attribute__((weakref("_setPWM_weak")));
+bool _setPWM(int pin, uint32_t val, uint32_t range) {
+  return _setPWM_bound(pin, val, range);
+}
+*/
+
+// Start up a waveform on a pin, or change the current one.  Will change to the new
+// waveform smoothly on next low->high transition.  For immediate change, stopWaveform()
+// first, then it will immediately begin.
+//extern int startWaveformClockCycles_weak(uint8_t pin, uint32_t timeHighCycles, uint32_t timeLowCycles, uint32_t runTimeCycles, int8_t alignPhase, uint32_t phaseOffsetUS, bool autoPwm)  __attribute__((weak));
+int startWaveformClockCycles_weak(uint8_t pin, uint32_t timeHighCycles, uint32_t timeLowCycles, uint32_t runTimeCycles,
+                             int8_t alignPhase, uint32_t phaseOffsetUS, bool autoPwm) {
+  (void) alignPhase;
+  (void) phaseOffsetUS;
+  (void) autoPwm;
+
+   if ((pin > 16) || isFlashInterfacePin(pin) || (timeHighCycles == 0)) {
+    return false;
+  }
+  Waveform *wave = &wvfState.waveform[pin];
+  wave->expiryCycle = runTimeCycles ? ESP.getCycleCount() + runTimeCycles : 0;
+  if (runTimeCycles && !wave->expiryCycle) {
+    wave->expiryCycle = 1; // expiryCycle==0 means no timeout, so avoid setting it
+  }
+
+  _stopPWM(pin); // Make sure there's no PWM live here
+
+  uint32_t mask = 1<<pin;
+  MEMBARRIER();
+  if (wvfState.waveformEnabled & mask) {
+    // Make sure no waveform changes are waiting to be applied
+    while (wvfState.waveformToChange) {
+      esp_yield(); // Wait for waveform to update
+      MEMBARRIER();
+    }
+    wvfState.waveformNewHigh = timeHighCycles;
+    wvfState.waveformNewLow = timeLowCycles;
+    MEMBARRIER();
+    wvfState.waveformToChange = mask;
+    // The waveform will be updated some time in the future on the next period for the signal
+  } else { //  if (!(wvfState.waveformEnabled & mask)) {
+    wave->timeHighCycles = timeHighCycles;
+    wave->desiredHighCycles = timeHighCycles;
+    wave->timeLowCycles = timeLowCycles;
+    wave->desiredLowCycles = timeLowCycles;
+    wave->lastEdge = 0;
+    wave->nextServiceCycle = ESP.getCycleCount() + microsecondsToClockCycles(1);
+    wvfState.waveformToEnable |= mask;
+    MEMBARRIER();
+    initTimer();
+    forceTimerInterrupt();
+    while (wvfState.waveformToEnable) {
+      esp_yield(); // Wait for waveform to update
+      MEMBARRIER();
+    }
+  }
+
+  return true;
+}
+/*
+static int startWaveformClockCycles_bound(uint8_t pin, uint32_t timeHighCycles, uint32_t timeLowCycles, uint32_t runTimeCycles, int8_t alignPhase, uint32_t phaseOffsetUS, bool autoPwm) __attribute__((weakref("startWaveformClockCycles_weak")));
+int startWaveformClockCycles(uint8_t pin, uint32_t timeHighCycles, uint32_t timeLowCycles, uint32_t runTimeCycles, int8_t alignPhase, uint32_t phaseOffsetUS, bool autoPwm) {
+  return startWaveformClockCycles_bound(pin, timeHighCycles, timeLowCycles, runTimeCycles, alignPhase, phaseOffsetUS, autoPwm);
+}
+
+
+// This version falls-thru to the proper startWaveformClockCycles call and is invariant across waveform generators
+int startWaveform(uint8_t pin, uint32_t timeHighUS, uint32_t timeLowUS, uint32_t runTimeUS,
+                  int8_t alignPhase, uint32_t phaseOffsetUS, bool autoPwm) {
+  return startWaveformClockCycles_bound(pin,
+    microsecondsToClockCycles(timeHighUS), microsecondsToClockCycles(timeLowUS),
+    microsecondsToClockCycles(runTimeUS), alignPhase, microsecondsToClockCycles(phaseOffsetUS), autoPwm);
+}
+*/
+
+// Set a callback.  Pass in NULL to stop it
+//extern void setTimer1Callback_weak(uint32_t (*fn)()) __attribute__((weak));
+void setTimer1Callback_weak(uint32_t (*fn)()) {
+  wvfState.timer1CB = fn;
+  if (fn) {
+    initTimer();
+    forceTimerInterrupt();
+  }
+  disableIdleTimer();
+}
+/*
+static void setTimer1Callback_bound(uint32_t (*fn)()) __attribute__((weakref("setTimer1Callback_weak")));
+void setTimer1Callback(uint32_t (*fn)()) {
+  setTimer1Callback_bound(fn);
+}
+*/
+
+// Stops a waveform on a pin
+//extern int stopWaveform_weak(uint8_t pin) __attribute__((weak));
+IRAM_ATTR int stopWaveform_weak(uint8_t pin) {
+  // Can't possibly need to stop anything if there is no timer active
+  if (!timerRunning) {
+    return false;
+  }
+  // If user sends in a pin >16 but <32, this will always point to a 0 bit
+  // If they send >=32, then the shift will result in 0 and it will also return false
+  uint32_t mask = 1<<pin;
+  if (wvfState.waveformEnabled & mask) {
+    wvfState.waveformToDisable = mask;
+    // Cancel any pending updates for this waveform, too.
+    if (wvfState.waveformToChange & mask) {
+        wvfState.waveformToChange = 0;
+    }
+    forceTimerInterrupt();
+    while (wvfState.waveformToDisable) {
+      MEMBARRIER(); // If it wasn't written yet, it has to be by now
+      /* no-op */ // Can't delay() since stopWaveform may be called from an IRQ
+    }
+  }
+  disableIdleTimer();
+  return true;
+}
+/*
+static int stopWaveform_bound(uint8_t pin) __attribute__((weakref("stopWaveform_weak")));
+IRAM_ATTR int stopWaveform(uint8_t pin) {
+  return stopWaveform_bound(pin);
+}
+*/
+
+// Speed critical bits
+#pragma GCC optimize ("O2")
+
+// Normally would not want two copies like this, but due to different
+// optimization levels the inline attribute gets lost if we try the
+// other version.
+static inline IRAM_ATTR uint32_t GetCycleCountIRQ() {
+  uint32_t ccount;
+  __asm__ __volatile__("rsr %0,ccount":"=a"(ccount));
+  return ccount;
+}
+
+// Find the earliest cycle as compared to right now
+static inline IRAM_ATTR uint32_t earliest(uint32_t a, uint32_t b) {
+    uint32_t now = GetCycleCountIRQ();
+    int32_t da = a - now;
+    int32_t db = b - now;
+    return (da < db) ? a : b;
+}
+
+// ----- @willmmiles begin patch -----
+// NMI crash workaround
+// Sometimes the NMI fails to return, stalling the CPU.  When this happens,
+// the next NMI gets a return address /inside the NMI handler function/.
+// We work around this by caching the last NMI return address, and restoring
+// the epc3 and eps3 registers to the previous values if the observed epc3
+// happens to be pointing to the _NMILevelVector function.
+extern void _NMILevelVector();
+extern void _UserExceptionVector_1(); // the next function after _NMILevelVector
+static inline IRAM_ATTR void nmiCrashWorkaround() {
+  static uintptr_t epc3_backup, eps3_backup;
+
+  uintptr_t epc3, eps3;
+  __asm__ __volatile__("rsr %0,epc3; rsr %1,eps3":"=a"(epc3),"=a" (eps3));
+  if ((epc3 < (uintptr_t) &_NMILevelVector) || (epc3 >= (uintptr_t) &_UserExceptionVector_1)) {
+    // Address is good; save backup
+    epc3_backup = epc3;
+    eps3_backup = eps3;
+  } else {
+    // Address is inside the NMI handler -- restore from backup
+    __asm__ __volatile__("wsr %0,epc3; wsr %1,eps3"::"a"(epc3_backup),"a"(eps3_backup));
+  }
+}
+// ----- @willmmiles end patch -----
+
+
+// The SDK and hardware take some time to actually get to our NMI code, so
+// decrement the next IRQ's timer value by a bit so we can actually catch the
+// real CPU cycle counter we want for the waveforms.
+
+// The SDK also sometimes is running at a different speed the the Arduino core
+// so the ESP cycle counter is actually running at a variable speed.
+// adjust(x) takes care of adjusting a delta clock cycle amount accordingly.
+#if F_CPU == 80000000
+  #define DELTAIRQ (microsecondsToClockCycles(9)/4)
+  #define adjust(x) ((x) << (turbo ? 1 : 0))
+#else
+  #define DELTAIRQ (microsecondsToClockCycles(9)/8)
+  #define adjust(x) ((x) >> 0)
+#endif
+
+// When the time to the next edge is greater than this, RTI and set another IRQ to minimize CPU usage
+#define MINIRQTIME microsecondsToClockCycles(6)
+
+static IRAM_ATTR void timer1Interrupt() {
+  // ----- @willmmiles begin patch -----
+  nmiCrashWorkaround();
+  // ----- @willmmiles end patch -----
+
+  // Flag if the core is at 160 MHz, for use by adjust()
+  bool turbo = (*(uint32_t*)0x3FF00014) & 1 ? true : false;
+
+  uint32_t nextEventCycle = GetCycleCountIRQ() + microsecondsToClockCycles(MAXIRQUS);
+  uint32_t timeoutCycle = GetCycleCountIRQ() + microsecondsToClockCycles(14);
+
+  if (wvfState.waveformToEnable || wvfState.waveformToDisable) {
+    // Handle enable/disable requests from main app
+    wvfState.waveformEnabled = (wvfState.waveformEnabled & ~wvfState.waveformToDisable) | wvfState.waveformToEnable; // Set the requested waveforms on/off
+    wvfState.waveformState &= ~wvfState.waveformToEnable;  // And clear the state of any just started
+    wvfState.waveformToEnable = 0;
+    wvfState.waveformToDisable = 0;
+    // No mem barrier.  Globals must be written to RAM on ISR exit.
+    // Find the first GPIO being generated by checking GCC's find-first-set (returns 1 + the bit of the first 1 in an int32_t)
+    wvfState.startPin = __builtin_ffs(wvfState.waveformEnabled) - 1;
+    // Find the last bit by subtracting off GCC's count-leading-zeros (no offset in this one)
+    wvfState.endPin = 32 - __builtin_clz(wvfState.waveformEnabled);
+  } else if (!pwmState.cnt && pwmState.pwmUpdate) {
+    // Start up the PWM generator by copying from the mailbox
+    pwmState.cnt = 1;
+    pwmState.idx = 1; // Ensure copy this cycle, cause it to start at t=0
+    pwmState.nextServiceCycle = GetCycleCountIRQ(); // Do it this loop!
+    // No need for mem barrier here.  Global must be written by IRQ exit
+  }
+
+  bool done = false;
+  if (wvfState.waveformEnabled || pwmState.cnt) {
+    do {
+      nextEventCycle = GetCycleCountIRQ() + microsecondsToClockCycles(MAXIRQUS);
+
+      // PWM state machine implementation
+      if (pwmState.cnt) {
+        int32_t cyclesToGo;
+        do {
+            cyclesToGo = pwmState.nextServiceCycle - GetCycleCountIRQ();
+            if (cyclesToGo < 0) {
+                if (pwmState.idx == pwmState.cnt) { // Start of pulses, possibly copy new
+                  if (pwmState.pwmUpdate) {
+                    // Do the memory copy from temp to global and clear mailbox
+                    pwmState = *(PWMState*)pwmState.pwmUpdate;
+                  }
+                  GPOS = pwmState.mask; // Set all active pins high
+                  if (pwmState.mask & (1<<16)) {
+                    GP16O = 1;
+                  }
+                  pwmState.idx = 0;
+                } else {
+                  do {
+                    // Drop the pin at this edge
+                    if (pwmState.mask & (1<<pwmState.pin[pwmState.idx])) {
+                      GPOC = 1<<pwmState.pin[pwmState.idx];
+                      if (pwmState.pin[pwmState.idx] == 16) {
+                        GP16O = 0;
+                      }
+                    }
+                    pwmState.idx++;
+                    // Any other pins at this same PWM value will have delta==0, drop them too.
+                  } while (pwmState.delta[pwmState.idx] == 0);
+                }
+                // Preserve duty cycle over PWM period by using now+xxx instead of += delta
+                cyclesToGo = adjust(pwmState.delta[pwmState.idx]);
+                pwmState.nextServiceCycle = GetCycleCountIRQ() + cyclesToGo;
+            }
+            nextEventCycle = earliest(nextEventCycle, pwmState.nextServiceCycle);
+        } while (pwmState.cnt && (cyclesToGo < 100));
+      }
+
+      for (auto i = wvfState.startPin; i <= wvfState.endPin; i++) {
+        uint32_t mask = 1<<i;
+
+        // If it's not on, ignore!
+        if (!(wvfState.waveformEnabled & mask)) {
+          continue;
+        }
+
+        Waveform *wave = &wvfState.waveform[i];
+        uint32_t now = GetCycleCountIRQ();
+
+        // Disable any waveforms that are done
+        if (wave->expiryCycle) {
+          int32_t expiryToGo = wave->expiryCycle - now;
+          if (expiryToGo < 0) {
+              // Done, remove!
+              if (i == 16) {
+                GP16O = 0;
+              } 
+              GPOC = mask;
+              wvfState.waveformEnabled &= ~mask;
+              continue;
+            }
+        }
+
+        // Check for toggles
+        int32_t cyclesToGo = wave->nextServiceCycle - now;
+        if (cyclesToGo < 0) {
+          uint32_t nextEdgeCycles;
+          uint32_t desired = 0;
+          uint32_t *timeToUpdate;
+          wvfState.waveformState ^= mask;
+          if (wvfState.waveformState & mask) {
+            if (i == 16) {
+              GP16O = 1;
+            }
+            GPOS = mask;
+
+            if (wvfState.waveformToChange & mask) {
+              // Copy over next full-cycle timings
+              wave->timeHighCycles = wvfState.waveformNewHigh;
+              wave->desiredHighCycles = wvfState.waveformNewHigh;
+              wave->timeLowCycles = wvfState.waveformNewLow;
+              wave->desiredLowCycles = wvfState.waveformNewLow;
+              wave->lastEdge = 0;
+              wvfState.waveformToChange = 0;
+            }
+            if (wave->lastEdge) {
+              desired = wave->desiredLowCycles;
+              timeToUpdate = &wave->timeLowCycles;
+            }
+            nextEdgeCycles = wave->timeHighCycles;
+          } else {
+            if (i == 16) {
+              GP16O = 0;
+            }
+            GPOC = mask;
+            desired = wave->desiredHighCycles;
+            timeToUpdate = &wave->timeHighCycles;
+            nextEdgeCycles = wave->timeLowCycles;
+          }
+          if (desired) {
+            desired = adjust(desired);
+            int32_t err = desired - (now - wave->lastEdge);
+            if (abs(err) < desired) { // If we've lost > the entire phase, ignore this error signal
+                err /= 2;
+                *timeToUpdate += err;
+            }
+          }
+          nextEdgeCycles = adjust(nextEdgeCycles);
+          wave->nextServiceCycle = now + nextEdgeCycles;
+          wave->lastEdge = now;
+        }
+        nextEventCycle = earliest(nextEventCycle, wave->nextServiceCycle);
+      }
+
+      // Exit the loop if we've hit the fixed runtime limit or the next event is known to be after that timeout would occur
+      uint32_t now = GetCycleCountIRQ();
+      int32_t cycleDeltaNextEvent = nextEventCycle - now;
+      int32_t cyclesLeftTimeout = timeoutCycle - now;
+      done = (cycleDeltaNextEvent > MINIRQTIME) || (cyclesLeftTimeout < 0);
+    } while (!done);
+  } // if (wvfState.waveformEnabled)
+
+  if (wvfState.timer1CB) {
+    nextEventCycle = earliest(nextEventCycle, GetCycleCountIRQ() + wvfState.timer1CB());
+  }
+
+  int32_t nextEventCycles = nextEventCycle - GetCycleCountIRQ();
+
+  if (nextEventCycles < MINIRQTIME) {
+    nextEventCycles = MINIRQTIME;
+  }
+  nextEventCycles -= DELTAIRQ;
+
+  // Do it here instead of global function to save time and because we know it's edge-IRQ
+  T1L = nextEventCycles >> (turbo ? 1 : 0);
+}
+
+};

package.json

@@ -1,6 +1,6 @@
 {
   "name": "wled",
-  "version": "0.16.0-alpha",
+  "version": "0.15.0",
   "description": "Tools for WLED project",
   "main": "tools/cdata.js",
   "directories": {
@@ -14,21 +14,21 @@
   },
   "repository": {
     "type": "git",
-    "url": "git+https://github.com/wled-dev/WLED.git"
+    "url": "git+https://github.com/Aircoookie/WLED.git"
   },
   "author": "",
   "license": "ISC",
   "bugs": {
-    "url": "https://github.com/wled-dev/WLED/issues"
+    "url": "https://github.com/Aircoookie/WLED/issues"
   },
-  "homepage": "https://github.com/wled-dev/WLED#readme",
+  "homepage": "https://github.com/Aircoookie/WLED#readme",
   "dependencies": {
     "clean-css": "^5.3.3",
     "html-minifier-terser": "^7.2.0",
-    "web-resource-inliner": "^7.0.0",
-    "nodemon": "^3.1.9"
+    "inliner": "^1.13.1",
+    "nodemon": "^3.1.7"
   },
   "engines": {
     "node": ">=20.0.0"
   }
-}
+}

pio-scripts/build_ui.py

@@ -1,21 +1,3 @@
-Import("env")
-import shutil
+Import('env')
 
-node_ex = shutil.which("node")
-# Check if Node.js is installed and present in PATH if it failed, abort the build
-if node_ex is None:
-    print('\x1b[0;31;43m' + 'Node.js is not installed or missing from PATH html css js will not be processed check https://kno.wled.ge/advanced/compiling-wled/' + '\x1b[0m')
-    exitCode = env.Execute("null")
-    exit(exitCode)
-else:
-    # Install the necessary node packages for the pre-build asset bundling script
-    print('\x1b[6;33;42m' + 'Installing node packages' + '\x1b[0m')
-    env.Execute("npm ci")
-
-    # Call the bundling script
-    exitCode = env.Execute("npm run build")
-
-    # If it failed, abort the build
-    if (exitCode):
-      print('\x1b[0;31;43m' + 'npm run build fails check https://kno.wled.ge/advanced/compiling-wled/' + '\x1b[0m')
-      exit(exitCode)
+env.Execute("npm run build")

pio-scripts/load_usermods.py

@@ -1,107 +0,0 @@
-Import('env')
-from collections import deque
-from pathlib import Path   # For OS-agnostic path manipulation
-from click import secho
-from SCons.Script import Exit
-from platformio.builder.tools.piolib import LibBuilderBase
-
-usermod_dir = Path(env["PROJECT_DIR"]).resolve() / "usermods"
-
-# Utility functions
-def find_usermod(mod: str) -> Path:
-  """Locate this library in the usermods folder.
-     We do this to avoid needing to rename a bunch of folders;
-     this could be removed later
-  """
-  # Check name match
-  mp = usermod_dir / mod
-  if mp.exists():
-    return mp
-  mp = usermod_dir / f"{mod}_v2"
-  if mp.exists():
-    return mp
-  mp = usermod_dir / f"usermod_v2_{mod}"
-  if mp.exists():
-    return mp
-  raise RuntimeError(f"Couldn't locate module {mod} in usermods directory!")
-
-def is_wled_module(dep: LibBuilderBase) -> bool:
-  """Returns true if the specified library is a wled module
-  """
-  return usermod_dir in Path(dep.src_dir).parents or str(dep.name).startswith("wled-")
-
-## Script starts here
-# Process usermod option
-usermods = env.GetProjectOption("custom_usermods","")
-
-# Handle "all usermods" case
-if usermods == '*':
-  usermods = [f.name for f in usermod_dir.iterdir() if f.is_dir() and f.joinpath('library.json').exists()]
-else:
-  usermods = usermods.split()
-
-if usermods:
-  # Inject usermods in to project lib_deps
-  symlinks = [f"symlink://{find_usermod(mod).resolve()}" for mod in usermods]
-  env.GetProjectConfig().set("env:" + env['PIOENV'], 'lib_deps', env.GetProjectOption('lib_deps') + symlinks)
-
-# Utility function for assembling usermod include paths
-def cached_add_includes(dep, dep_cache: set, includes: deque):
-  """ Add dep's include paths to includes if it's not in the cache """
-  if dep not in dep_cache:
-    dep_cache.add(dep)
-    for include in dep.get_include_dirs():
-      if include not in includes:
-        includes.appendleft(include)
-      if usermod_dir not in Path(dep.src_dir).parents:
-        # Recurse, but only for NON-usermods
-        for subdep in dep.depbuilders:
-          cached_add_includes(subdep, dep_cache, includes)
-
-# Monkey-patch ConfigureProjectLibBuilder to mark up the dependencies
-# Save the old value
-old_ConfigureProjectLibBuilder = env.ConfigureProjectLibBuilder
-
-# Our new wrapper
-def wrapped_ConfigureProjectLibBuilder(xenv):
-  # Call the wrapped function
-  result = old_ConfigureProjectLibBuilder.clone(xenv)()
-
-  # Fix up include paths
-  # In PlatformIO >=6.1.17, this could be done prior to ConfigureProjectLibBuilder
-  wled_dir = xenv["PROJECT_SRC_DIR"]
-  # Build a list of dependency include dirs
-  # TODO: Find out if this is the order that PlatformIO/SCons puts them in??
-  processed_deps = set()
-  extra_include_dirs = deque()  # Deque used for fast prepend
-  for dep in result.depbuilders:
-     cached_add_includes(dep, processed_deps, extra_include_dirs)
-
-  wled_deps = [dep for dep in result.depbuilders if is_wled_module(dep)]
-
-  broken_usermods = []
-  for dep in wled_deps:
-    # Add the wled folder to the include path
-    dep.env.PrependUnique(CPPPATH=str(wled_dir))
-    # Add WLED's own dependencies
-    for dir in extra_include_dirs:
-      dep.env.PrependUnique(CPPPATH=str(dir))
-    # Enforce that libArchive is not set; we must link them directly to the executable
-    if dep.lib_archive:
-      broken_usermods.append(dep)
-
-  if broken_usermods:
-    broken_usermods = [usermod.name for usermod in broken_usermods]
-    secho(
-      f"ERROR: libArchive=false is missing on usermod(s) {' '.join(broken_usermods)} -- modules will not compile in correctly",
-      fg="red",
-      err=True)
-    Exit(1)
-
-  # Save the depbuilders list for later validation
-  xenv.Replace(WLED_MODULES=wled_deps)
-
-  return result
-
-# Apply the wrapper
-env.AddMethod(wrapped_ConfigureProjectLibBuilder, "ConfigureProjectLibBuilder")

pio-scripts/validate_modules.py

@@ -1,80 +0,0 @@
-import re
-from pathlib import Path   # For OS-agnostic path manipulation
-from typing import Iterable
-from click import secho
-from SCons.Script import Action, Exit
-from platformio.builder.tools.piolib import LibBuilderBase
-
-
-def is_wled_module(env, dep: LibBuilderBase) -> bool:
-  """Returns true if the specified library is a wled module
-  """
-  usermod_dir = Path(env["PROJECT_DIR"]).resolve() / "usermods"
-  return usermod_dir in Path(dep.src_dir).parents or str(dep.name).startswith("wled-")
-
-
-def read_lines(p: Path):
-    """ Read in the contents of a file for analysis """
-    with p.open("r", encoding="utf-8", errors="ignore") as f:
-        return f.readlines()
-
-
-def check_map_file_objects(map_file: list[str], dirs: Iterable[str]) -> set[str]:
-    """ Identify which dirs contributed to the final build
-
-        Returns the (sub)set of dirs that are found in the output ELF
-    """
-    # Pattern to match symbols in object directories
-    # Join directories into alternation
-    usermod_dir_regex = "|".join([re.escape(dir) for dir in dirs])
-    # Matches nonzero address, any size, and any path in a matching directory
-    object_path_regex = re.compile(r"0x0*[1-9a-f][0-9a-f]*\s+0x[0-9a-f]+\s+\S+[/\\](" + usermod_dir_regex + r")[/\\]\S+\.o")
-
-    found = set()
-    for line in map_file:
-        matches = object_path_regex.findall(line)
-        for m in matches:
-            found.add(m)
-    return found
-
-
-def count_usermod_objects(map_file: list[str]) -> int:
-    """ Returns the number of usermod objects in the usermod list """
-    # Count the number of entries in the usermods table section
-    return len([x for x in map_file if ".dtors.tbl.usermods.1" in x])
-
-
-def validate_map_file(source, target, env):
-    """ Validate that all modules appear in the output build """
-    build_dir = Path(env.subst("$BUILD_DIR"))
-    map_file_path = build_dir /  env.subst("${PROGNAME}.map")
-
-    if not map_file_path.exists():
-        secho(f"ERROR: Map file not found: {map_file_path}", fg="red", err=True)
-        Exit(1)
-
-    # Identify the WLED module builders, set by load_usermods.py
-    module_lib_builders = env['WLED_MODULES']
-
-    # Extract the values we care about
-    modules = {Path(builder.build_dir).name: builder.name for builder in module_lib_builders}
-    secho(f"INFO: {len(modules)} libraries linked as WLED optional/user modules")
-
-    # Now parse the map file
-    map_file_contents = read_lines(map_file_path)
-    usermod_object_count = count_usermod_objects(map_file_contents)
-    secho(f"INFO: {usermod_object_count} usermod object entries")
-
-    confirmed_modules = check_map_file_objects(map_file_contents, modules.keys())
-    missing_modules = [modname for mdir, modname in modules.items() if mdir not in confirmed_modules]
-    if missing_modules:
-        secho(
-            f"ERROR: No object files from {missing_modules} found in linked output!",
-            fg="red",
-            err=True)
-        Exit(1)
-    return None
-
-Import("env")
-env.Append(LINKFLAGS=[env.subst("-Wl,--Map=${BUILD_DIR}/${PROGNAME}.map")])
-env.AddPostAction("$BUILD_DIR/${PROGNAME}.elf", Action(validate_map_file, cmdstr='Checking linked optional modules (usermods) in map file'))

platformio.ini

@@ -10,7 +10,7 @@
 # ------------------------------------------------------------------------------
 
 # CI/release binaries
-default_envs = nodemcuv2, esp8266_2m, esp01_1m_full, nodemcuv2_160, esp8266_2m_160, esp01_1m_full_160, nodemcuv2_compat, esp8266_2m_compat, esp01_1m_full_compat, esp32dev, esp32_eth, lolin_s2_mini, esp32c3dev, esp32s3dev_16MB_opi, esp32s3dev_8MB_opi, esp32s3_4M_qspi, esp32_wrover, usermods
+default_envs = nodemcuv2, esp8266_2m, esp01_1m_full, nodemcuv2_160, esp8266_2m_160, esp01_1m_full_160, nodemcuv2_compat, esp8266_2m_compat, esp01_1m_full_compat, esp32dev, esp32_eth, lolin_s2_mini, esp32c3dev, esp32s3dev_16MB_opi, esp32s3dev_8MB_opi, esp32s3_4M_qspi, esp32_wrover
 
 src_dir  = ./wled00
 data_dir = ./wled00/data
@@ -114,9 +114,7 @@ extra_scripts =
   post:pio-scripts/output_bins.py
   post:pio-scripts/strip-floats.py
   pre:pio-scripts/user_config_copy.py
-  pre:pio-scripts/load_usermods.py
   pre:pio-scripts/build_ui.py
-  post:pio-scripts/validate_modules.py  ;; double-check the build output usermods
   ; post:pio-scripts/obj-dump.py  ;; convenience script to create a disassembly dump of the firmware (hardcore debugging)
 
 # ------------------------------------------------------------------------------
@@ -140,10 +138,9 @@ lib_compat_mode = strict
 lib_deps =
     fastled/FastLED @ 3.6.0
     IRremoteESP8266 @ 2.8.2
-    makuna/NeoPixelBus @ 2.8.3
+    makuna/NeoPixelBus @ 2.8.0
     #https://github.com/makuna/NeoPixelBus.git#CoreShaderBeta
-    https://github.com/Aircoookie/ESPAsyncWebServer.git#v2.4.2
-    marvinroger/AsyncMqttClient @ 0.9.0
+    https://github.com/Aircoookie/ESPAsyncWebServer.git#v2.2.1
   # for I2C interface
     ;Wire
   # ESP-NOW library
@@ -160,18 +157,25 @@ lib_deps =
     ;adafruit/Adafruit BMP280 Library @ 2.1.0
     ;adafruit/Adafruit CCS811 Library @ 1.0.4
     ;adafruit/Adafruit Si7021 Library @ 1.4.0
+  #For ADS1115 sensor uncomment following
+    ;adafruit/Adafruit BusIO @ 1.13.2
+    ;adafruit/Adafruit ADS1X15 @ 2.4.0
   #For MAX1704x Lipo Monitor / Fuel Gauge uncomment following
     ; https://github.com/adafruit/Adafruit_BusIO @ 1.14.5
     ; https://github.com/adafruit/Adafruit_MAX1704X @ 1.0.2
   #For MPU6050 IMU uncomment follwoing
     ;electroniccats/MPU6050 @1.0.1
+  # For -D USERMOD_ANIMARTRIX
+  # CC BY-NC 3.0 licensed effects by Stefan Petrick, include this usermod only if you accept the terms!
+    ;https://github.com/netmindz/animartrix.git#18bf17389e57c69f11bc8d04ebe1d215422c7fb7
   # SHT85
     ;robtillaart/SHT85@~0.3.3
+  # Audioreactive usermod
+    ;kosme/arduinoFFT @ 2.0.1
 
 extra_scripts = ${scripts_defaults.extra_scripts}
 
 [esp8266]
-build_unflags = ${common.build_unflags}
 build_flags =
   -DESP8266
   -DFP_IN_IROM
@@ -231,110 +235,104 @@ lib_deps_compat =
   IRremoteESP8266 @ 2.8.2
   makuna/NeoPixelBus @ 2.7.9
   https://github.com/blazoncek/QuickESPNow.git#optional-debug
-  https://github.com/Aircoookie/ESPAsyncWebServer.git#v2.4.0
+  https://github.com/Aircoookie/ESPAsyncWebServer.git#v2.2.1
 
-[esp32_all_variants]
-lib_deps =
-  esp32async/AsyncTCP @ 3.4.7
-  bitbank2/AnimatedGIF@^1.4.7
-  https://github.com/Aircoookie/GifDecoder#bc3af18
-build_flags =
-  -D CONFIG_ASYNC_TCP_USE_WDT=0
-  -D CONFIG_ASYNC_TCP_STACK_SIZE=8192
-  -D WLED_ENABLE_GIF
 
 [esp32]
-platform = ${esp32_idf_V4.platform}
-platform_packages =
-build_unflags = ${common.build_unflags}
-build_flags = ${esp32_idf_V4.build_flags}
-lib_deps = ${esp32_idf_V4.lib_deps}
-
+#platform = https://github.com/tasmota/platform-espressif32/releases/download/v2.0.2.3/platform-espressif32-2.0.2.3.zip
+platform = espressif32@3.5.0
+platform_packages = framework-arduinoespressif32 @ https://github.com/Aircoookie/arduino-esp32.git#1.0.6.4
+build_flags = -g
+  -DARDUINO_ARCH_ESP32
+  #-DCONFIG_LITTLEFS_FOR_IDF_3_2
+  -D CONFIG_ASYNC_TCP_USE_WDT=0
+  #use LITTLEFS library by lorol in ESP32 core 1.x.x instead of built-in in 2.x.x
+  -D LOROL_LITTLEFS
+  ; -DARDUINO_USB_CDC_ON_BOOT=0 ;; this flag is mandatory for "classic ESP32" when building with arduino-esp32 >=2.0.3
 tiny_partitions = tools/WLED_ESP32_2MB_noOTA.csv
 default_partitions = tools/WLED_ESP32_4MB_1MB_FS.csv
 extended_partitions = tools/WLED_ESP32_4MB_700k_FS.csv
 big_partitions = tools/WLED_ESP32_4MB_256KB_FS.csv     ;; 1.8MB firmware, 256KB filesystem, coredump support
 large_partitions = tools/WLED_ESP32_8MB.csv
 extreme_partitions = tools/WLED_ESP32_16MB_9MB_FS.csv
-
-board_build.partitions = ${esp32.default_partitions}   ;; default partioning for 4MB Flash - can be overridden in build envs
-# additional build flags for audioreactive - must be applied globally
-AR_build_flags = ;; -fsingle-precision-constant ;; forces ArduinoFFT to use float math (2x faster)
-AR_lib_deps =  ;; for pre-usermod-library platformio_override compatibility
-
+lib_deps =
+  https://github.com/lorol/LITTLEFS.git
+  https://github.com/pbolduc/AsyncTCP.git @ 1.2.0
+  ${env.lib_deps}
+# additional build flags for audioreactive
+AR_build_flags = -D USERMOD_AUDIOREACTIVE 
+  -D sqrt_internal=sqrtf ;; -fsingle-precision-constant ;; forces ArduinoFFT to use float math (2x faster)
+AR_lib_deps = kosme/arduinoFFT @ 2.0.1
 
 [esp32_idf_V4]
-;; build environment for ESP32 using ESP-IDF 4.4.x / arduino-esp32 v2.0.5
+;; experimental build environment for ESP32 using ESP-IDF 4.4.x / arduino-esp32 v2.0.5
+;; very similar to the normal ESP32 flags, but omitting Lorol LittleFS, as littlefs is included in the new framework already.
 ;;
 ;; please note that you can NOT update existing ESP32 installs with a "V4" build. Also updating by OTA will not work properly.
 ;; You need to completely erase your device (esptool erase_flash) first, then install the "V4" build from VSCode+platformio.
-
-;; select arduino-esp32 v2.0.9 (arduino-esp32 2.0.10 thru 2.0.14 are buggy so avoid them)
-platform = https://github.com/tasmota/platform-espressif32/releases/download/2023.06.02/platform-espressif32.zip ;; Tasmota Arduino Core 2.0.9 with IPv6 support, based on IDF 4.4.4
-build_unflags = ${common.build_unflags}
+platform = espressif32@ ~6.3.2
+platform_packages = platformio/framework-arduinoespressif32 @ 3.20009.0    ;; select arduino-esp32 v2.0.9 (arduino-esp32 2.0.10 thru 2.0.14 are buggy so avoid them)
 build_flags = -g
   -Wshadow=compatible-local ;; emit warning in case a local variable "shadows" another local one
   -DARDUINO_ARCH_ESP32 -DESP32
-  ${esp32_all_variants.build_flags}
-  -D WLED_ENABLE_DMX_INPUT
+  -D CONFIG_ASYNC_TCP_USE_WDT=0
+  -DARDUINO_USB_CDC_ON_BOOT=0 ;; this flag is mandatory for "classic ESP32" when building with arduino-esp32 >=2.0.3
 lib_deps =
-  ${esp32_all_variants.lib_deps}
-  https://github.com/someweisguy/esp_dmx.git#47db25d
+  https://github.com/pbolduc/AsyncTCP.git @ 1.2.0
   ${env.lib_deps}
 
 [esp32s2]
 ;; generic definitions for all ESP32-S2 boards
-platform = ${esp32_idf_V4.platform}
-build_unflags = ${common.build_unflags}
+platform = espressif32@ ~6.3.2
+platform_packages = platformio/framework-arduinoespressif32 @ 3.20009.0    ;; select arduino-esp32 v2.0.9 (arduino-esp32 2.0.10 thru 2.0.14 are buggy so avoid them)
 build_flags = -g
   -DARDUINO_ARCH_ESP32
   -DARDUINO_ARCH_ESP32S2
   -DCONFIG_IDF_TARGET_ESP32S2=1
+  -D CONFIG_ASYNC_TCP_USE_WDT=0
   -DARDUINO_USB_MSC_ON_BOOT=0 -DARDUINO_USB_DFU_ON_BOOT=0
   -DCO
   -DARDUINO_USB_MODE=0 ;; this flag is mandatory for ESP32-S2 !
   ;; please make sure that the following flags are properly set (to 0 or 1) by your board.json, or included in your custom platformio_override.ini entry:
   ;; ARDUINO_USB_CDC_ON_BOOT
-  ${esp32_idf_V4.build_flags}
 lib_deps =
-  ${esp32_idf_V4.lib_deps}
-board_build.partitions = ${esp32.default_partitions}   ;; default partioning for 4MB Flash - can be overridden in build envs
+  https://github.com/pbolduc/AsyncTCP.git @ 1.2.0
+  ${env.lib_deps}
 
 [esp32c3]
 ;; generic definitions for all ESP32-C3 boards
-platform = ${esp32_idf_V4.platform}
-build_unflags = ${common.build_unflags}
+platform = espressif32@ ~6.3.2
+platform_packages = platformio/framework-arduinoespressif32 @ 3.20009.0    ;; select arduino-esp32 v2.0.9 (arduino-esp32 2.0.10 thru 2.0.14 are buggy so avoid them)
 build_flags = -g
   -DARDUINO_ARCH_ESP32
   -DARDUINO_ARCH_ESP32C3
   -DCONFIG_IDF_TARGET_ESP32C3=1
+  -D CONFIG_ASYNC_TCP_USE_WDT=0
   -DCO
   -DARDUINO_USB_MODE=1 ;; this flag is mandatory for ESP32-C3
   ;; please make sure that the following flags are properly set (to 0 or 1) by your board.json, or included in your custom platformio_override.ini entry:
   ;; ARDUINO_USB_CDC_ON_BOOT
-  ${esp32_idf_V4.build_flags}
 lib_deps =
-  ${esp32_idf_V4.lib_deps}
-board_build.partitions = ${esp32.default_partitions}   ;; default partioning for 4MB Flash - can be overridden in build envs
-board_build.flash_mode = qio
+  https://github.com/pbolduc/AsyncTCP.git @ 1.2.0
+  ${env.lib_deps}
 
 [esp32s3]
 ;; generic definitions for all ESP32-S3 boards
-platform = ${esp32_idf_V4.platform}
-build_unflags = ${common.build_unflags}
+platform = espressif32@ ~6.3.2
+platform_packages = platformio/framework-arduinoespressif32 @ 3.20009.0    ;; select arduino-esp32 v2.0.9 (arduino-esp32 2.0.10 thru 2.0.14 are buggy so avoid them)
 build_flags = -g
   -DESP32
   -DARDUINO_ARCH_ESP32
   -DARDUINO_ARCH_ESP32S3
   -DCONFIG_IDF_TARGET_ESP32S3=1
+  -D CONFIG_ASYNC_TCP_USE_WDT=0
   -DARDUINO_USB_MSC_ON_BOOT=0 -DARDUINO_DFU_ON_BOOT=0
   -DCO
   ;; please make sure that the following flags are properly set (to 0 or 1) by your board.json, or included in your custom platformio_override.ini entry:
   ;; ARDUINO_USB_MODE, ARDUINO_USB_CDC_ON_BOOT
-  ${esp32_idf_V4.build_flags}
 lib_deps =
-  ${esp32_idf_V4.lib_deps}
-board_build.partitions = ${esp32.large_partitions}   ;; default partioning for 8MB flash - can be overridden in build envs
+  https://github.com/pbolduc/AsyncTCP.git @ 1.2.0
+  ${env.lib_deps}
 
 
 # ------------------------------------------------------------------------------
@@ -348,7 +346,6 @@ platform_packages = ${common.platform_packages}
 board_build.ldscript = ${common.ldscript_4m1m}
 build_unflags = ${common.build_unflags}
 build_flags = ${common.build_flags} ${esp8266.build_flags} -D WLED_RELEASE_NAME=\"ESP8266\" #-DWLED_DISABLE_2D
-  -D WLED_DISABLE_PARTICLESYSTEM2D
 lib_deps = ${esp8266.lib_deps}
 monitor_filters = esp8266_exception_decoder
 
@@ -358,15 +355,13 @@ extends = env:nodemcuv2
 platform = ${esp8266.platform_compat}
 platform_packages = ${esp8266.platform_packages_compat}
 build_flags = ${common.build_flags} ${esp8266.build_flags_compat} -D WLED_RELEASE_NAME=\"ESP8266_compat\" #-DWLED_DISABLE_2D
-  -D WLED_DISABLE_PARTICLESYSTEM2D
 ;; lib_deps = ${esp8266.lib_deps_compat} ;; experimental - use older NeoPixelBus 2.7.9
 
 [env:nodemcuv2_160]
 extends = env:nodemcuv2
 board_build.f_cpu = 160000000L
 build_flags = ${common.build_flags} ${esp8266.build_flags} -D WLED_RELEASE_NAME=\"ESP8266_160\" #-DWLED_DISABLE_2D
-  -D WLED_DISABLE_PARTICLESYSTEM2D
-custom_usermods = audioreactive
+  -D USERMOD_AUDIOREACTIVE
 
 [env:esp8266_2m]
 board = esp_wroom_02
@@ -375,8 +370,6 @@ platform_packages = ${common.platform_packages}
 board_build.ldscript = ${common.ldscript_2m512k}
 build_unflags = ${common.build_unflags}
 build_flags = ${common.build_flags} ${esp8266.build_flags} -D WLED_RELEASE_NAME=\"ESP02\"
-  -D WLED_DISABLE_PARTICLESYSTEM2D
-  -D WLED_DISABLE_PARTICLESYSTEM1D
 lib_deps = ${esp8266.lib_deps}
 
 [env:esp8266_2m_compat]
@@ -385,16 +378,12 @@ extends = env:esp8266_2m
 platform = ${esp8266.platform_compat}
 platform_packages = ${esp8266.platform_packages_compat}
 build_flags = ${common.build_flags} ${esp8266.build_flags_compat} -D WLED_RELEASE_NAME=\"ESP02_compat\" #-DWLED_DISABLE_2D
-  -D WLED_DISABLE_PARTICLESYSTEM1D
-  -D WLED_DISABLE_PARTICLESYSTEM2D
 
 [env:esp8266_2m_160]
 extends = env:esp8266_2m
 board_build.f_cpu = 160000000L
 build_flags = ${common.build_flags} ${esp8266.build_flags} -D WLED_RELEASE_NAME=\"ESP02_160\"
-  -D WLED_DISABLE_PARTICLESYSTEM1D
-  -D WLED_DISABLE_PARTICLESYSTEM2D
-custom_usermods = audioreactive
+  -D USERMOD_AUDIOREACTIVE
 
 [env:esp01_1m_full]
 board = esp01_1m
@@ -404,8 +393,6 @@ board_build.ldscript = ${common.ldscript_1m128k}
 build_unflags = ${common.build_unflags}
 build_flags = ${common.build_flags} ${esp8266.build_flags} -D WLED_RELEASE_NAME=\"ESP01\" -D WLED_DISABLE_OTA
   ; -D WLED_USE_REAL_MATH ;; may fix wrong sunset/sunrise times, at the cost of 7064 bytes FLASH and 975 bytes RAM
-  -D WLED_DISABLE_PARTICLESYSTEM1D
-  -D WLED_DISABLE_PARTICLESYSTEM2D
 lib_deps = ${esp8266.lib_deps}
 
 [env:esp01_1m_full_compat]
@@ -414,37 +401,35 @@ extends = env:esp01_1m_full
 platform = ${esp8266.platform_compat}
 platform_packages = ${esp8266.platform_packages_compat}
 build_flags = ${common.build_flags} ${esp8266.build_flags_compat} -D WLED_RELEASE_NAME=\"ESP01_compat\" -D WLED_DISABLE_OTA #-DWLED_DISABLE_2D
-  -D WLED_DISABLE_PARTICLESYSTEM1D
-  -D WLED_DISABLE_PARTICLESYSTEM2D
 
 [env:esp01_1m_full_160]
 extends = env:esp01_1m_full
 board_build.f_cpu = 160000000L
 build_flags = ${common.build_flags} ${esp8266.build_flags} -D WLED_RELEASE_NAME=\"ESP01_160\" -D WLED_DISABLE_OTA
+  -D USERMOD_AUDIOREACTIVE
   ; -D WLED_USE_REAL_MATH ;; may fix wrong sunset/sunrise times, at the cost of 7064 bytes FLASH and 975 bytes RAM
-  -D WLED_DISABLE_PARTICLESYSTEM1D
-  -D WLED_DISABLE_PARTICLESYSTEM2D
-custom_usermods = audioreactive
 
 [env:esp32dev]
 board = esp32dev
-platform = ${esp32_idf_V4.platform}
+platform = ${esp32.platform}
+platform_packages = ${esp32.platform_packages}
 build_unflags = ${common.build_unflags}
-custom_usermods = audioreactive
-build_flags = ${common.build_flags} ${esp32_idf_V4.build_flags} -D WLED_RELEASE_NAME=\"ESP32_V4\" #-D WLED_DISABLE_BROWNOUT_DET
-              -DARDUINO_USB_CDC_ON_BOOT=0 ;; this flag is mandatory for "classic ESP32" when building with arduino-esp32 >=2.0.3
-lib_deps = ${esp32_idf_V4.lib_deps}
+build_flags = ${common.build_flags} ${esp32.build_flags} -D WLED_RELEASE_NAME=\"ESP32\" #-D WLED_DISABLE_BROWNOUT_DET
+  ${esp32.AR_build_flags}
+lib_deps = ${esp32.lib_deps}
+  ${esp32.AR_lib_deps}
 monitor_filters = esp32_exception_decoder
 board_build.partitions = ${esp32.default_partitions}
-board_build.flash_mode = dio
 
 [env:esp32dev_8M]
 board = esp32dev
 platform = ${esp32_idf_V4.platform}
-custom_usermods = audioreactive
+platform_packages = ${esp32_idf_V4.platform_packages}
 build_unflags = ${common.build_unflags}
 build_flags = ${common.build_flags} ${esp32_idf_V4.build_flags} -D WLED_RELEASE_NAME=\"ESP32_8M\" #-D WLED_DISABLE_BROWNOUT_DET
+  ${esp32.AR_build_flags}
 lib_deps = ${esp32_idf_V4.lib_deps}
+  ${esp32.AR_lib_deps}
 monitor_filters = esp32_exception_decoder
 board_build.partitions = ${esp32.large_partitions}
 board_upload.flash_size = 8MB
@@ -455,10 +440,12 @@ board_upload.maximum_size = 8388608
 [env:esp32dev_16M]
 board = esp32dev
 platform = ${esp32_idf_V4.platform}
-custom_usermods = audioreactive
+platform_packages = ${esp32_idf_V4.platform_packages}
 build_unflags = ${common.build_unflags}
 build_flags = ${common.build_flags} ${esp32_idf_V4.build_flags} -D WLED_RELEASE_NAME=\"ESP32_16M\" #-D WLED_DISABLE_BROWNOUT_DET
+  ${esp32.AR_build_flags}
 lib_deps = ${esp32_idf_V4.lib_deps}
+  ${esp32.AR_lib_deps}
 monitor_filters = esp32_exception_decoder
 board_build.partitions = ${esp32.extreme_partitions}
 board_upload.flash_size = 16MB
@@ -466,34 +453,53 @@ board_upload.maximum_size = 16777216
 board_build.f_flash = 80000000L
 board_build.flash_mode = dio
 
+;[env:esp32dev_audioreactive]
+;board = esp32dev
+;platform = ${esp32.platform}
+;platform_packages = ${esp32.platform_packages}
+;build_unflags = ${common.build_unflags}
+;build_flags = ${common.build_flags} ${esp32.build_flags} -D WLED_RELEASE_NAME=\"ESP32_audioreactive\" #-D WLED_DISABLE_BROWNOUT_DET
+;  ${esp32.AR_build_flags}
+;lib_deps = ${esp32.lib_deps}
+;  ${esp32.AR_lib_deps}
+;monitor_filters = esp32_exception_decoder
+;board_build.partitions = ${esp32.default_partitions}
+;; board_build.f_flash = 80000000L
+;; board_build.flash_mode = dio
+
 [env:esp32_eth]
 board = esp32-poe
-platform = ${esp32_idf_V4.platform}
+platform = ${esp32.platform}
+platform_packages = ${esp32.platform_packages}
 upload_speed = 921600
-custom_usermods = audioreactive
 build_unflags = ${common.build_unflags}
 build_flags = ${common.build_flags} ${esp32.build_flags} -D WLED_RELEASE_NAME=\"ESP32_Ethernet\" -D RLYPIN=-1 -D WLED_USE_ETHERNET -D BTNPIN=-1
 ;  -D WLED_DISABLE_ESPNOW ;; ESP-NOW requires wifi, may crash with ethernet only
+  ${esp32.AR_build_flags}
 lib_deps = ${esp32.lib_deps}
+  ${esp32.AR_lib_deps}
 board_build.partitions = ${esp32.default_partitions}
-board_build.flash_mode = dio
 
 [env:esp32_wrover]
 extends = esp32_idf_V4
+platform = ${esp32_idf_V4.platform}
+platform_packages = ${esp32_idf_V4.platform_packages}
 board = ttgo-t7-v14-mini32
 board_build.f_flash = 80000000L
 board_build.flash_mode = qio
 board_build.partitions = ${esp32.extended_partitions}
-custom_usermods = audioreactive
 build_unflags = ${common.build_unflags}
 build_flags = ${common.build_flags} ${esp32_idf_V4.build_flags} -D WLED_RELEASE_NAME=\"ESP32_WROVER\"
   -DBOARD_HAS_PSRAM -mfix-esp32-psram-cache-issue ;; Older ESP32 (rev.<3) need a PSRAM fix (increases static RAM used) https://docs.espressif.com/projects/esp-idf/en/stable/esp32/api-guides/external-ram.html
   -D DATA_PINS=25
+  ${esp32.AR_build_flags}
 lib_deps = ${esp32_idf_V4.lib_deps}
-  
+  ${esp32.AR_lib_deps}
+
 [env:esp32c3dev]
 extends = esp32c3
 platform = ${esp32c3.platform}
+platform_packages = ${esp32c3.platform_packages}
 framework = arduino
 board = esp32-c3-devkitm-1
 board_build.partitions = ${esp32.default_partitions}
@@ -511,15 +517,17 @@ lib_deps = ${esp32c3.lib_deps}
 board = esp32-s3-devkitc-1 ;; generic dev board; the next line adds PSRAM support
 board_build.arduino.memory_type = qio_opi     ;; use with PSRAM: 8MB or 16MB
 platform = ${esp32s3.platform}
+platform_packages = ${esp32s3.platform_packages}
 upload_speed = 921600
-custom_usermods = audioreactive
 build_unflags = ${common.build_unflags}
 build_flags = ${common.build_flags} ${esp32s3.build_flags} -D WLED_RELEASE_NAME=\"ESP32-S3_16MB_opi\"
   -D CONFIG_LITTLEFS_FOR_IDF_3_2 -D WLED_WATCHDOG_TIMEOUT=0
   ;-D ARDUINO_USB_CDC_ON_BOOT=0  ;; -D ARDUINO_USB_MODE=1 ;; for boards with serial-to-USB chip
   -D ARDUINO_USB_CDC_ON_BOOT=1 -D ARDUINO_USB_MODE=1      ;; for boards with USB-OTG connector only (USBCDC or "TinyUSB")
   -DBOARD_HAS_PSRAM
+  ${esp32.AR_build_flags}
 lib_deps = ${esp32s3.lib_deps}
+  ${esp32.AR_lib_deps}
 board_build.partitions = ${esp32.extreme_partitions}
 board_upload.flash_size = 16MB
 board_upload.maximum_size = 16777216
@@ -532,15 +540,17 @@ monitor_filters = esp32_exception_decoder
 board = esp32-s3-devkitc-1 ;; generic dev board; the next line adds PSRAM support
 board_build.arduino.memory_type = qio_opi     ;; use with PSRAM: 8MB or 16MB
 platform = ${esp32s3.platform}
+platform_packages = ${esp32s3.platform_packages}
 upload_speed = 921600
-custom_usermods = audioreactive
 build_unflags = ${common.build_unflags}
 build_flags = ${common.build_flags} ${esp32s3.build_flags} -D WLED_RELEASE_NAME=\"ESP32-S3_8MB_opi\"
   -D CONFIG_LITTLEFS_FOR_IDF_3_2 -D WLED_WATCHDOG_TIMEOUT=0
   ;-D ARDUINO_USB_CDC_ON_BOOT=0  ;; -D ARDUINO_USB_MODE=1 ;; for boards with serial-to-USB chip
   -D ARDUINO_USB_CDC_ON_BOOT=1 -D ARDUINO_USB_MODE=1      ;; for boards with USB-OTG connector only (USBCDC or "TinyUSB")
   -DBOARD_HAS_PSRAM
+  ${esp32.AR_build_flags}
 lib_deps = ${esp32s3.lib_deps}
+  ${esp32.AR_lib_deps}
 board_build.partitions = ${esp32.large_partitions}
 board_build.f_flash = 80000000L
 board_build.flash_mode = qio
@@ -550,10 +560,10 @@ monitor_filters = esp32_exception_decoder
 ;; For ESP32-S3 WROOM-2, a.k.a. ESP32-S3 DevKitC-1 v1.1
 ;; with >= 16MB FLASH and >= 8MB PSRAM (memory_type: opi_opi)
 platform = ${esp32s3.platform}
+platform_packages = ${esp32s3.platform_packages}
 board = esp32s3camlcd ;; this is the only standard board with "opi_opi"
 board_build.arduino.memory_type = opi_opi
 upload_speed = 921600
-custom_usermods = audioreactive
 build_unflags = ${common.build_unflags}
 build_flags = ${common.build_flags} ${esp32s3.build_flags} -D WLED_RELEASE_NAME=\"ESP32-S3_WROOM-2\"
   -D CONFIG_LITTLEFS_FOR_IDF_3_2 -D WLED_WATCHDOG_TIMEOUT=0
@@ -563,8 +573,10 @@ build_flags = ${common.build_flags} ${esp32s3.build_flags} -D WLED_RELEASE_NAME=
   -D LEDPIN=38 -D DATA_PINS=38 ;; buildin WS2812b LED
   -D BTNPIN=0 -D RLYPIN=16 -D IRPIN=17 -D AUDIOPIN=-1
   -D WLED_DEBUG
+  ${esp32.AR_build_flags}
   -D SR_DMTYPE=1 -D I2S_SDPIN=13 -D I2S_CKPIN=14 -D I2S_WSPIN=15 -D MCLK_PIN=4  ;; I2S mic
 lib_deps = ${esp32s3.lib_deps}
+  ${esp32.AR_lib_deps}
 
 board_build.partitions = ${esp32.extreme_partitions}
 board_upload.flash_size = 16MB
@@ -575,15 +587,17 @@ monitor_filters = esp32_exception_decoder
 ;; ESP32-S3, with 4MB FLASH and <= 4MB PSRAM (memory_type: qio_qspi)
 board = lolin_s3_mini ;; -S3 mini, 4MB flash 2MB PSRAM 
 platform = ${esp32s3.platform}
+platform_packages = ${esp32s3.platform_packages}
 upload_speed = 921600
-custom_usermods = audioreactive
 build_unflags = ${common.build_unflags}
 build_flags = ${common.build_flags} ${esp32s3.build_flags} -D WLED_RELEASE_NAME=\"ESP32-S3_4M_qspi\"
   -DARDUINO_USB_CDC_ON_BOOT=1 -DARDUINO_USB_MODE=1      ;; for boards with USB-OTG connector only (USBCDC or "TinyUSB")
   -DBOARD_HAS_PSRAM
   -DLOLIN_WIFI_FIX ; seems to work much better with this
   -D WLED_WATCHDOG_TIMEOUT=0
+  ${esp32.AR_build_flags}
 lib_deps = ${esp32s3.lib_deps}
+  ${esp32.AR_lib_deps}
 board_build.partitions = ${esp32.default_partitions}
 board_build.f_flash = 80000000L
 board_build.flash_mode = qio
@@ -591,11 +605,11 @@ monitor_filters = esp32_exception_decoder
 
 [env:lolin_s2_mini]
 platform = ${esp32s2.platform}
+platform_packages = ${esp32s2.platform_packages}
 board = lolin_s2_mini
 board_build.partitions = ${esp32.default_partitions}
 board_build.flash_mode = qio
 board_build.f_flash = 80000000L
-custom_usermods = audioreactive
 build_unflags = ${common.build_unflags}
 build_flags = ${common.build_flags} ${esp32s2.build_flags} -D WLED_RELEASE_NAME=\"ESP32-S2\"
   -DARDUINO_USB_CDC_ON_BOOT=1
@@ -604,6 +618,7 @@ build_flags = ${common.build_flags} ${esp32s2.build_flags} -D WLED_RELEASE_NAME=
   -DBOARD_HAS_PSRAM
   -DLOLIN_WIFI_FIX ; seems to work much better with this
   -D WLED_WATCHDOG_TIMEOUT=0
+  -D CONFIG_ASYNC_TCP_USE_WDT=0
   -D DATA_PINS=16
   -D HW_PIN_SCL=35
   -D HW_PIN_SDA=33
@@ -611,17 +626,6 @@ build_flags = ${common.build_flags} ${esp32s2.build_flags} -D WLED_RELEASE_NAME=
   -D HW_PIN_DATASPI=11
   -D HW_PIN_MISOSPI=9
 ;  -D STATUSLED=15
+  ${esp32.AR_build_flags}
 lib_deps = ${esp32s2.lib_deps}
-
-
-[env:usermods]
-board = esp32dev
-platform = ${esp32_idf_V4.platform}
-build_unflags = ${common.build_unflags}
-build_flags = ${common.build_flags} ${esp32_idf_V4.build_flags} -D WLED_RELEASE_NAME=\"ESP32_USERMODS\"
-  -DTOUCH_CS=9
-lib_deps = ${esp32_idf_V4.lib_deps}
-monitor_filters = esp32_exception_decoder
-board_build.flash_mode = dio
-custom_usermods = *   ; Expands to all usermods in usermods folder
-board_build.partitions = ${esp32.extreme_partitions}  ; We're gonna need a bigger boat
+  ${esp32.AR_lib_deps}

platformio_override.sample.ini

@@ -5,7 +5,7 @@
 # Please visit documentation: https://docs.platformio.org/page/projectconf.html
 
 [platformio]
-default_envs = WLED_generic8266_1M, esp32dev_V4_dio80  # put the name(s) of your own build environment here. You can define as many as you need
+default_envs = WLED_tasmota_1M  # define as many as you need
 
 #----------
 # SAMPLE
@@ -28,12 +28,13 @@ lib_deps = ${esp8266.lib_deps}
 ;  robtillaart/SHT85@~0.3.3
 ;  ;gmag11/QuickESPNow @ ~0.7.0 # will also load QuickDebug
 ;  https://github.com/blazoncek/QuickESPNow.git#optional-debug  ;; exludes debug library
-;  ${esp32.AR_lib_deps} ;; needed for USERMOD_AUDIOREACTIVE
+;  ${esp32.AR_lib_deps} ;; used for USERMOD_AUDIOREACTIVE
+;  bitbank2/PNGdec@^1.0.1 ;; used for POV display uncomment following
 
 build_unflags = ${common.build_unflags}
 build_flags = ${common.build_flags} ${esp8266.build_flags}
 ;
-; *** To use the below defines/overrides, copy and paste each onto its own line just below build_flags in the section above.
+; *** To use the below defines/overrides, copy and paste each onto it's own line just below build_flags in the section above.
 ; 
 ; Set a release name that may be used to distinguish required binary for flashing
 ;   -D WLED_RELEASE_NAME=\"ESP32_MULTI_USREMODS\"
@@ -140,8 +141,7 @@ build_flags = ${common.build_flags} ${esp8266.build_flags}
 ;   -D PIR_SENSOR_MAX_SENSORS=2 # max allowable sensors (uses OR logic for triggering)
 ;
 ; Use Audioreactive usermod and configure I2S microphone
-;   ${esp32.AR_build_flags} ;; default flags required to properly configure ArduinoFFT
-;   ;; don't forget to add ArduinoFFT to your libs_deps: ${esp32.AR_lib_deps}
+;   -D USERMOD_AUDIOREACTIVE
 ;   -D AUDIOPIN=-1
 ;   -D DMTYPE=1     # 0-analog/disabled, 1-I2S generic, 2-ES7243, 3-SPH0645, 4-I2S+mclk, 5-I2S PDM
 ;   -D I2S_SDPIN=36
@@ -157,22 +157,17 @@ build_flags = ${common.build_flags} ${esp8266.build_flags}
 ;   -D USERMOD_POV_DISPLAY
 ; Use built-in or custom LED as a status indicator (assumes LED is connected to GPIO16)
 ;   -D STATUSLED=16
-;
+;   
 ; set the name of the module - make sure there is a quote-backslash-quote before the name and a backslash-quote-quote after the name
 ;   -D SERVERNAME="\"WLED\""
-;
+;   
 ; set the number of LEDs
-;   -D PIXEL_COUNTS=30
+;   -D DEFAULT_LED_COUNT=30
 ; or this for multiple outputs
 ;   -D PIXEL_COUNTS=30,30
 ;
 ; set the default LED type
-;   -D LED_TYPES=22    # see const.h (TYPE_xxxx)
-; or this for multiple outputs
-;   -D LED_TYPES=TYPE_SK6812_RGBW,TYPE_WS2812_RGB
-;
-; set default color order of your led strip
-;   -D DEFAULT_LED_COLOR_ORDER=COL_ORDER_GRB
+;   -D DEFAULT_LED_TYPE=22    # see const.h (TYPE_xxxx)
 ;
 ; set milliampere limit when using ESP power pin (or inadequate PSU) to power LEDs
 ;   -D ABL_MILLIAMPS_DEFAULT=850
@@ -181,6 +176,9 @@ build_flags = ${common.build_flags} ${esp8266.build_flags}
 ; enable IR by setting remote type
 ;   -D IRTYPE=0   # 0 Remote disabled | 1 24-key RGB | 2 24-key with CT | 3 40-key blue | 4 40-key RGB | 5 21-key RGB | 6 6-key black | 7 9-key red | 8 JSON remote
 ;   
+; set default color order of your led strip
+;   -D DEFAULT_LED_COLOR_ORDER=COL_ORDER_GRB
+;
 ; use PSRAM on classic ESP32 rev.1 (rev.3 or above has no issues)
 ;   -DBOARD_HAS_PSRAM -mfix-esp32-psram-cache-issue   # needed only for classic ESP32 rev.1
 ;
@@ -238,13 +236,14 @@ build_flags = ${common.build_flags} ${esp8266.build_flags} -D DATA_PINS=1 -D WLE
 lib_deps = ${esp8266.lib_deps}
 
 [env:esp32dev_qio80]
-extends = env:esp32dev  # we want to extend the existing esp32dev environment (and define only updated options)
 board = esp32dev
+platform = ${esp32.platform}
+platform_packages = ${esp32.platform_packages}
+build_unflags = ${common.build_unflags}
 build_flags = ${common.build_flags} ${esp32.build_flags} #-D WLED_DISABLE_BROWNOUT_DET
-  ${esp32.AR_build_flags} ;; optional - includes USERMOD_AUDIOREACTIVE
 lib_deps = ${esp32.lib_deps}
-  ${esp32.AR_lib_deps} ;; needed for USERMOD_AUDIOREACTIVE
 monitor_filters = esp32_exception_decoder
+board_build.partitions = ${esp32.default_partitions}
 board_build.f_flash = 80000000L
 board_build.flash_mode = qio
 
@@ -252,25 +251,26 @@ board_build.flash_mode = qio
 ;; experimental ESP32 env using ESP-IDF V4.4.x
 ;; Warning: this build environment is not stable!!
 ;; please erase your device before installing.
-extends = esp32_idf_V4  # based on newer "esp-idf V4" platform environment
 board = esp32dev
+platform = ${esp32_idf_V4.platform}
+platform_packages = ${esp32_idf_V4.platform_packages}
+build_unflags = ${common.build_unflags}
 build_flags = ${common.build_flags}  ${esp32_idf_V4.build_flags} #-D WLED_DISABLE_BROWNOUT_DET
-  ${esp32.AR_build_flags} ;; includes USERMOD_AUDIOREACTIVE
 lib_deps = ${esp32_idf_V4.lib_deps}
-  ${esp32.AR_lib_deps} ;; needed for USERMOD_AUDIOREACTIVE
 monitor_filters = esp32_exception_decoder
-board_build.partitions = ${esp32.default_partitions}  ;; if you get errors about "out of program space", change this to ${esp32.extended_partitions} or even ${esp32.big_partitions}
+board_build.partitions = ${esp32_idf_V4.default_partitions}
 board_build.f_flash = 80000000L
 board_build.flash_mode = dio
 
 [env:esp32s2_saola]
-extends = esp32s2
 board = esp32-s2-saola-1
 platform = ${esp32s2.platform}
 platform_packages = ${esp32s2.platform_packages}
 framework = arduino
+board_build.partitions = tools/WLED_ESP32_4MB_1MB_FS.csv
 board_build.flash_mode = qio
 upload_speed = 460800
+build_unflags = ${common.build_unflags}
 build_flags = ${common.build_flags} ${esp32s2.build_flags}
   ;-DLOLIN_WIFI_FIX ;; try this in case Wifi does not work
   -DARDUINO_USB_CDC_ON_BOOT=1
@@ -279,7 +279,7 @@ lib_deps = ${esp32s2.lib_deps}
 [env:esp32s3dev_8MB_PSRAM_qspi]
 ;; ESP32-TinyS3 development board, with 8MB FLASH and PSRAM (memory_type: qio_qspi)
 extends = env:esp32s3dev_8MB_PSRAM_opi
-;board = um_tinys3 ;    -> needs workaround from https://github.com/wled-dev/WLED/pull/2905#issuecomment-1328049860
+;board = um_tinys3 ;    -> needs workaround from https://github.com/Aircoookie/WLED/pull/2905#issuecomment-1328049860
 board = esp32-s3-devkitc-1 ;; generic dev board; the next line adds PSRAM support
 board_build.arduino.memory_type = qio_qspi ;; use with PSRAM: 2MB or  4MB
 
@@ -307,7 +307,7 @@ platform = ${common.platform_wled_default}
 platform_packages = ${common.platform_packages}
 board_build.ldscript = ${common.ldscript_4m1m}
 build_unflags = ${common.build_unflags}
-build_flags = ${common.build_flags} ${esp8266.build_flags} -D WLED_USE_SHOJO_PCB ;; NB: WLED_USE_SHOJO_PCB is not used anywhere in the source code. Not sure why its needed.
+build_flags = ${common.build_flags} ${esp8266.build_flags} -D WLED_USE_SHOJO_PCB
 lib_deps = ${esp8266.lib_deps}
 
 [env:d1_mini_debug]
@@ -362,48 +362,35 @@ board_upload.flash_size = 2MB
 board_upload.maximum_size = 2097152
 
 [env:wemos_shield_esp32]
-extends = esp32              ;; use default esp32 platform
 board = esp32dev
+platform = ${esp32.platform}
+platform_packages = ${esp32.platform_packages}
 upload_speed = 460800
+build_unflags = ${common.build_unflags}
 build_flags = ${common.build_flags} ${esp32.build_flags}
-  -D WLED_RELEASE_NAME=\"ESP32_wemos_shield\"
   -D DATA_PINS=16
   -D RLYPIN=19
   -D BTNPIN=17
   -D IRPIN=18
-  -UWLED_USE_MY_CONFIG
+  -D UWLED_USE_MY_CONFIG
   -D USERMOD_DALLASTEMPERATURE
   -D USERMOD_FOUR_LINE_DISPLAY
   -D TEMPERATURE_PIN=23
-  ${esp32.AR_build_flags} ;; includes USERMOD_AUDIOREACTIVE
+  -D USERMOD_AUDIOREACTIVE
 lib_deps = ${esp32.lib_deps}
-  OneWire@~2.3.5          ;; needed for USERMOD_DALLASTEMPERATURE
-  olikraus/U8g2 @ ^2.28.8 ;; needed for USERMOD_FOUR_LINE_DISPLAY
-  ${esp32.AR_lib_deps}    ;; needed for USERMOD_AUDIOREACTIVE
+  OneWire@~2.3.5
+  olikraus/U8g2 @ ^2.28.8
+  https://github.com/blazoncek/arduinoFFT.git
 board_build.partitions = ${esp32.default_partitions}
 
-[env:esp32_pico-D4]
-extends = esp32              ;; use default esp32 platform
-board = pico32               ;; pico32-D4 is different from the standard esp32dev
-                             ;; hardware details from https://github.com/srg74/WLED-ESP32-pico
-build_flags = ${common.build_flags} ${esp32.build_flags}
-  -D WLED_RELEASE_NAME=\"pico32-D4\" -D SERVERNAME='"WLED-pico32"'
-  -D WLED_DISABLE_ADALIGHT   ;; no serial-to-USB chip on this board - better to disable serial protocols
-  -D DATA_PINS=2,18          ;; LED pins
-  -D RLYPIN=19 -D BTNPIN=0 -D IRPIN=-1 ;; no default pin for IR
-  ${esp32.AR_build_flags}    ;; include USERMOD_AUDIOREACTIVE
-  -D UM_AUDIOREACTIVE_ENABLE ;; enable AR by default
-  ;; Audioreactive settings for on-board microphone (ICS-43432)
-  -D SR_DMTYPE=1 -D I2S_SDPIN=25 -D I2S_WSPIN=15 -D I2S_CKPIN=14
-  -D SR_SQUELCH=5 -D SR_GAIN=30
-lib_deps = ${esp32.lib_deps}
-  ${esp32.AR_lib_deps}       ;; needed for USERMOD_AUDIOREACTIVE
-board_build.partitions = ${esp32.default_partitions}
-board_build.f_flash = 80000000L
-
 [env:m5atom]
-extends = env:esp32dev  # we want to extend the existing esp32dev environment (and define only updated options)
+board = esp32dev
+build_unflags = ${common.build_unflags}
 build_flags = ${common.build_flags} ${esp32.build_flags} -D DATA_PINS=27 -D BTNPIN=39
+lib_deps = ${esp32.lib_deps}
+platform = ${esp32.platform}
+platform_packages = ${esp32.platform_packages}
+board_build.partitions = ${esp32.default_partitions}
 
 [env:sp501e]
 board = esp_wroom_02
@@ -426,7 +413,7 @@ platform_packages = ${common.platform_packages}
 board_build.ldscript = ${common.ldscript_2m512k}
 build_unflags = ${common.build_unflags}
 build_flags = ${common.build_flags} ${esp8266.build_flags} -D BTNPIN=-1 -D RLYPIN=-1 -D DATA_PINS=4,12,14,13,5
-                                            -D LED_TYPES=TYPE_ANALOG_5CH -D WLED_DISABLE_INFRARED -D WLED_MAX_CCT_BLEND=0
+                                            -D DEFAULT_LED_TYPE=TYPE_ANALOG_5CH -D WLED_DISABLE_INFRARED -D WLED_MAX_CCT_BLEND=0
 lib_deps = ${esp8266.lib_deps}
 
 [env:Athom_15w_RGBCW]        ;15w bulb
@@ -436,7 +423,7 @@ platform_packages = ${common.platform_packages}
 board_build.ldscript = ${common.ldscript_2m512k}
 build_unflags = ${common.build_unflags}
 build_flags = ${common.build_flags} ${esp8266.build_flags} -D BTNPIN=-1 -D RLYPIN=-1 -D DATA_PINS=4,12,14,5,13
-                                            -D LED_TYPES=TYPE_ANALOG_5CH -D WLED_DISABLE_INFRARED -D WLED_MAX_CCT_BLEND=0 -D WLED_USE_IC_CCT
+                                            -D DEFAULT_LED_TYPE=TYPE_ANALOG_5CH -D WLED_DISABLE_INFRARED -D WLED_MAX_CCT_BLEND=0 -D WLED_USE_IC_CCT
 lib_deps = ${esp8266.lib_deps}
 
 [env:Athom_3Pin_Controller]        ;small controller with only data
@@ -502,15 +489,17 @@ lib_deps = ${esp8266.lib_deps}
 # EleksTube-IPS
 # ------------------------------------------------------------------------------
 [env:elekstube_ips]
-extends = esp32              ;; use default esp32 platform
 board = esp32dev
+platform = ${esp32.platform}
+platform_packages = ${esp32.platform_packages}
 upload_speed = 921600
-custom_usermods = ${env:esp32dev.custom_usermods} RTC EleksTube_IPS
 build_flags = ${common.build_flags} ${esp32.build_flags} -D WLED_DISABLE_BROWNOUT_DET -D WLED_DISABLE_INFRARED
+  -D USERMOD_RTC
+  -D USERMOD_ELEKSTUBE_IPS
   -D DATA_PINS=12
   -D RLYPIN=27
   -D BTNPIN=34
-  -D PIXEL_COUNTS=6
+  -D DEFAULT_LED_COUNT=6
   # Display config
   -D ST7789_DRIVER
   -D TFT_WIDTH=135
@@ -524,14 +513,7 @@ build_flags = ${common.build_flags} ${esp32.build_flags} -D WLED_DISABLE_BROWNOU
   -D SPI_FREQUENCY=40000000
   -D USER_SETUP_LOADED
 monitor_filters = esp32_exception_decoder
-
-# ------------------------------------------------------------------------------
-# Usermod examples
-# ------------------------------------------------------------------------------
-
-# 433MHz RF remote example for esp32dev
-[env:esp32dev_usermod_RF433]
-extends = env:esp32dev
-build_flags = ${env:esp32dev.build_flags} -D USERMOD_RF433
-lib_deps = ${env:esp32dev.lib_deps}
-  sui77/rc-switch @ 2.6.4
+lib_deps =
+  ${esp32.lib_deps}
+  TFT_eSPI @ ^2.3.70
+board_build.partitions = ${esp32.default_partitions}

readme.md

@@ -1,20 +1,18 @@
 <p align="center">
   <img src="/images/wled_logo_akemi.png">
-  <a href="https://github.com/wled-dev/WLED/releases"><img src="https://img.shields.io/github/release/wled-dev/WLED.svg?style=flat-square"></a>
-  <a href="https://raw.githubusercontent.com/wled-dev/WLED/main/LICENSE"><img src="https://img.shields.io/github/license/wled-dev/wled?color=blue&style=flat-square"></a>
+  <a href="https://github.com/Aircoookie/WLED/releases"><img src="https://img.shields.io/github/release/Aircoookie/WLED.svg?style=flat-square"></a>
+  <a href="https://raw.githubusercontent.com/Aircoookie/WLED/master/LICENSE"><img src="https://img.shields.io/github/license/Aircoookie/wled?color=blue&style=flat-square"></a>
   <a href="https://wled.discourse.group"><img src="https://img.shields.io/discourse/topics?colorB=blue&label=forum&server=https%3A%2F%2Fwled.discourse.group%2F&style=flat-square"></a>
   <a href="https://discord.gg/QAh7wJHrRM"><img src="https://img.shields.io/discord/473448917040758787.svg?colorB=blue&label=discord&style=flat-square"></a>
   <a href="https://kno.wled.ge"><img src="https://img.shields.io/badge/quick_start-wiki-blue.svg?style=flat-square"></a>
   <a href="https://github.com/Aircoookie/WLED-App"><img src="https://img.shields.io/badge/app-wled-blue.svg?style=flat-square"></a>
-  <a href="https://gitpod.io/#https://github.com/wled-dev/WLED"><img src="https://img.shields.io/badge/Gitpod-ready--to--code-blue?style=flat-square&logo=gitpod"></a>
+  <a href="https://gitpod.io/#https://github.com/Aircoookie/WLED"><img src="https://img.shields.io/badge/Gitpod-ready--to--code-blue?style=flat-square&logo=gitpod"></a>
 
   </p>
 
-# Welcome to WLED! ✨
+# Welcome to my project WLED! ✨
 
-A fast and feature-rich implementation of an ESP32 and ESP8266 webserver to control NeoPixel (WS2812B, WS2811, SK6812) LEDs or also SPI based chipsets like the WS2801 and APA102!
-
-Originally created by [Aircoookie](https://github.com/Aircoookie)
+A fast and feature-rich implementation of an ESP8266/ESP32 webserver to control NeoPixel (WS2812B, WS2811, SK6812) LEDs or also SPI based chipsets like the WS2801 and APA102!
 
 ## ⚙️ Features
 - WS2812FX library with more than 100 special effects  
@@ -23,7 +21,7 @@ Originally created by [Aircoookie](https://github.com/Aircoookie)
 - Segments to set different effects and colors to user defined parts of the LED string  
 - Settings page - configuration via the network  
 - Access Point and station mode - automatic failsafe AP  
-- [Up to 10 LED outputs](https://kno.wled.ge/features/multi-strip/#esp32) per instance
+- Up to 10 LED outputs per instance
 - Support for RGBW strips  
 - Up to 250 user presets to save and load colors/effects easily, supports cycling through them.  
 - Presets can be used to automatically execute API calls  
@@ -34,7 +32,7 @@ Originally created by [Aircoookie](https://github.com/Aircoookie)
 - Filesystem-based config for easier backup of presets and settings  
 
 ## 💡 Supported light control interfaces
-- WLED app for [Android](https://play.google.com/store/apps/details?id=ca.cgagnier.wlednativeandroid) and [iOS](https://apps.apple.com/gb/app/wled-native/id6446207239)
+- WLED app for [Android](https://play.google.com/store/apps/details?id=com.aircoookie.WLED) and [iOS](https://apps.apple.com/us/app/wled/id1475695033)
 - JSON and HTTP request APIs  
 - MQTT   
 - E1.31, Art-Net, DDP and TPM2.net
@@ -65,7 +63,6 @@ See [here](https://kno.wled.ge/basics/compatible-hardware)!
 
 Licensed under the EUPL v1.2 license  
 Credits [here](https://kno.wled.ge/about/contributors/)!
-CORS proxy by [Corsfix](https://corsfix.com/)
 
 Join the Discord server to discuss everything about WLED!
 

requirements.in

@@ -1 +1 @@
-platformio>=6.1.17
+platformio

requirements.txt

@@ -1,26 +1,28 @@
 #
-# This file is autogenerated by pip-compile with Python 3.11
+# This file is autogenerated by pip-compile with Python 3.12
 # by the following command:
 #
-#    pip-compile requirements.in
+#    pip-compile
 #
 ajsonrpc==1.2.0
     # via platformio
-anyio==4.8.0
+anyio==4.6.0
     # via starlette
-bottle==0.13.2
+bottle==0.13.1
     # via platformio
-certifi==2025.1.31
+certifi==2024.8.30
     # via requests
-charset-normalizer==3.4.1
+charset-normalizer==3.3.2
     # via requests
-click==8.1.8
+click==8.1.7
     # via
     #   platformio
     #   uvicorn
 colorama==0.4.6
-    # via platformio
-h11==0.16.0
+    # via
+    #   click
+    #   platformio
+h11==0.14.0
     # via
     #   uvicorn
     #   wsproto
@@ -28,31 +30,29 @@ idna==3.10
     # via
     #   anyio
     #   requests
-marshmallow==3.26.1
+marshmallow==3.22.0
     # via platformio
-packaging==24.2
+packaging==24.1
     # via marshmallow
-platformio==6.1.17
+platformio==6.1.16
     # via -r requirements.in
-pyelftools==0.32
+pyelftools==0.31
     # via platformio
 pyserial==3.5
     # via platformio
-requests==2.32.4
+requests==2.32.3
     # via platformio
 semantic-version==2.10.0
     # via platformio
 sniffio==1.3.1
     # via anyio
-starlette==0.45.3
+starlette==0.39.1
     # via platformio
 tabulate==0.9.0
     # via platformio
-typing-extensions==4.12.2
-    # via anyio
-urllib3==2.5.0
+urllib3==2.2.3
     # via requests
-uvicorn==0.34.0
+uvicorn==0.30.6
     # via platformio
 wsproto==1.2.0
     # via platformio

tools/cdata.js

@@ -17,7 +17,7 @@
 
 const fs = require("node:fs");
 const path = require("path");
-const inline = require("web-resource-inliner");
+const inliner = require("inliner");
 const zlib = require("node:zlib");
 const CleanCSS = require("clean-css");
 const minifyHtml = require("html-minifier-terser").minify;
@@ -89,7 +89,7 @@ function adoptVersionAndRepo(html) {
     repoUrl = repoUrl.replace(/^git\+/, "");
     repoUrl = repoUrl.replace(/\.git$/, "");
     html = html.replaceAll("https://github.com/atuline/WLED", repoUrl);
-    html = html.replaceAll("https://github.com/wled-dev/WLED", repoUrl);
+    html = html.replaceAll("https://github.com/Aircoookie/WLED", repoUrl);
   }
   let version = packageJson.version;
   if (version) {
@@ -128,26 +128,21 @@ async function minify(str, type = "plain") {
 
 async function writeHtmlGzipped(sourceFile, resultFile, page) {
   console.info("Reading " + sourceFile);
-  inline.html({
-    fileContent: fs.readFileSync(sourceFile, "utf8"),
-    relativeTo: path.dirname(sourceFile),
-    strict: true,
-  },
-    async function (error, html) {
-      if (error) throw error;
+  new inliner(sourceFile, async function (error, html) {
+    if (error) throw error;
 
-      html = adoptVersionAndRepo(html);
-      const originalLength = html.length;
-      html = await minify(html, "html-minify");
-      const result = zlib.gzipSync(html, { level: zlib.constants.Z_BEST_COMPRESSION });
-      console.info("Minified and compressed " + sourceFile + " from " + originalLength + " to " + result.length + " bytes");
-      const array = hexdump(result);
-      let src = singleHeader;
-      src += `const uint16_t PAGE_${page}_L = ${result.length};\n`;
-      src += `const uint8_t PAGE_${page}[] PROGMEM = {\n${array}\n};\n\n`;
-      console.info("Writing " + resultFile);
-      fs.writeFileSync(resultFile, src);
-    });
+    html = adoptVersionAndRepo(html);
+    const originalLength = html.length;
+    html = await minify(html, "html-minify");
+    const result = zlib.gzipSync(html, { level: zlib.constants.Z_BEST_COMPRESSION });
+    console.info("Minified and compressed " + sourceFile + " from " + originalLength + " to " + result.length + " bytes");
+    const array = hexdump(result);
+    let src = singleHeader;
+    src += `const uint16_t PAGE_${page}_L = ${result.length};\n`;
+    src += `const uint8_t PAGE_${page}[] PROGMEM = {\n${array}\n};\n\n`;
+    console.info("Writing " + resultFile);
+    fs.writeFileSync(resultFile, src);
+  });
 }
 
 async function specToChunk(srcDir, s) {

tools/stress_test.sh

@@ -27,7 +27,6 @@ read -a JSON_TINY_TARGETS <<< $(replicate "json/nodes")
 read -a JSON_SMALL_TARGETS <<< $(replicate "json/info")
 read -a JSON_LARGE_TARGETS <<< $(replicate "json/si")
 read -a JSON_LARGER_TARGETS <<< $(replicate "json/fxdata")
-read -a INDEX_TARGETS <<< $(replicate "")
 
 # Expand target URLS to full arguments for curl
 TARGETS=(${TARGET_STR[@]})

tools/wled-tools

@@ -1,286 +0,0 @@
-#!/bin/bash
-
-# WLED Tools
-# A utility for managing WLED devices in a local network
-# https://github.com/wled/WLED
-
-# Color Definitions
-GREEN="\e[32m"
-RED="\e[31m"
-BLUE="\e[34m"
-YELLOW="\e[33m"
-RESET="\e[0m"
-
-# Logging function
-log() {
-    local category="$1"
-    local color="$2"
-    local text="$3"
-
-    if [ "$quiet" = true ]; then
-        return
-    fi
-
-    if [ -t 1 ]; then  # Check if output is a terminal
-        echo -e "${color}[${category}]${RESET} ${text}"
-    else
-        echo "[${category}] ${text}"
-    fi
-}
-
-# Generic curl handler function
-curl_handler() {
-    local command="$1"
-    local hostname="$2"
-
-    response=$($command -w "%{http_code}" -o /dev/null)
-    curl_exit_code=$?
-
-    if [ "$response" -ge 200 ] && [ "$response" -lt 300 ]; then
-        return 0
-    elif [ $curl_exit_code -ne 0 ]; then
-        log "ERROR" "$RED" "Connection error during request to $hostname (curl exit code: $curl_exit_code)."
-        return 1
-    elif [ "$response" -ge 400 ]; then
-        log "ERROR" "$RED" "Server error during request to $hostname (HTTP status code: $response)."
-        return 2
-    else
-        log "ERROR" "$RED" "Unexpected response from $hostname (HTTP status code: $response)."
-        return 3
-    fi
-}
-
-# Print help message
-show_help() {
-    cat << EOF
-Usage: wled-tools.sh [OPTIONS] COMMAND [ARGS...]
-
-Options:
-  -h, --help              Show this help message and exit.
-  -t, --target <IP/Host>  Specify a single WLED device by IP address or hostname.
-  -D, --discover          Discover multiple WLED devices using mDNS.
-  -d, --directory <Path>  Specify a directory for saving backups (default: working directory).
-  -f, --firmware <File>   Specify the firmware file for updating devices.
-  -q, --quiet             Suppress logging output (also makes discover output hostnames only).
-
-Commands:
-  backup      Backup the current state of a WLED device or multiple discovered devices.
-  update      Update the firmware of a WLED device or multiple discovered devices.
-  discover    Discover WLED devices using mDNS and list their IP addresses and names.
-
-Examples:
-  # Discover all WLED devices on the network
-  ./wled-tools discover
-
-  # Backup a specific WLED device
-  ./wled-tools -t 192.168.1.100 backup
-
-  # Backup all discovered WLED devices to a specific directory
-  ./wled-tools -D -d /path/to/backups backup
-
-  # Update firmware on all discovered WLED devices
-  ./wled-tools -D -f /path/to/firmware.bin update
-
-EOF
-}
-
-# Discover devices using mDNS
-discover_devices() {  
-    if ! command -v avahi-browse &> /dev/null; then  
-        log "ERROR" "$RED" "'avahi-browse' is required but not installed, please install avahi-utils using your preferred package manager."
-        exit 1  
-    fi  
-
-    # Map avahi responses to strings seperated by 0x1F (unit separator)
-    mapfile -t raw_devices < <(avahi-browse _wled._tcp --terminate -r -p | awk -F';' '/^=/ {print $7"\x1F"$8"\x1F"$9}')  
-
-    local devices_array=()  
-    for device in "${raw_devices[@]}"; do  
-        IFS=$'\x1F' read -r hostname address port <<< "$device"  
-        devices_array+=("$hostname" "$address" "$port")  
-    done  
-
-    echo "${devices_array[@]}"  
-}  
-
-# Backup one device
-backup_one() {
-    local hostname="$1"
-    local address="$2"
-    local port="$3"
-
-    log "INFO" "$YELLOW" "Backing up device config/presets: $hostname ($address:$port)"
-
-    mkdir -p "$backup_dir"
-
-    local cfg_url="http://$address:$port/cfg.json"
-    local presets_url="http://$address:$port/presets.json"
-    local cfg_dest="${backup_dir}/${hostname}.cfg.json"
-    local presets_dest="${backup_dir}/${hostname}.presets.json"
-
-    # Write to ".tmp" files first, then move when success, to ensure we don't write partial files
-    local curl_command_cfg="curl -s "$cfg_url" -o "$cfg_dest.tmp""
-    local curl_command_presets="curl -s "$presets_url" -o "$presets_dest.tmp""
-
-    if ! curl_handler "$curl_command_cfg" "$hostname"; then  
-        log "ERROR" "$RED" "Failed to backup configuration for $hostname"  
-        rm -f "$cfg_dest.tmp"  
-        return 1  
-    fi  
-    
-    if ! curl_handler "$curl_command_presets" "$hostname"; then  
-        log "ERROR" "$RED" "Failed to backup presets for $hostname"  
-        rm -f "$presets_dest.tmp"  
-        return 1  
-    fi 
-
-    mv "$cfg_dest.tmp" "$cfg_dest"
-    mv "$presets_dest.tmp" "$presets_dest"
-    log "INFO" "$GREEN" "Successfully backed up config and presets for $hostname"
-    return 0
-}
-
-# Update one device
-update_one() {
-    local hostname="$1"
-    local address="$2"
-    local port="$3"
-    local firmware="$4"
-
-    log "INFO" "$YELLOW" "Starting firmware update for device: $hostname ($address:$port)"
-
-    local url="http://$address:$port/update"
-    local curl_command="curl -s -X POST -F "file=@$firmware" "$url""
-
-    if ! curl_handler "$curl_command" "$hostname"; then
-        log "ERROR" "$RED" "Failed to update firmware for $hostname"
-        return 1
-    fi
-    
-    log "INFO" "$GREEN" "Successfully initiated firmware update for $hostname"
-    return 0
-}
-
-# Command-line arguments processing
-command=""
-target=""
-discover=false
-quiet=false
-backup_dir="./"
-firmware_file=""
-
-if [ $# -eq 0 ]; then
-    show_help
-    exit 0
-fi
-
-while [[ $# -gt 0 ]]; do
-    case "$1" in
-        -h|--help)
-            show_help
-            exit 0
-            ;;
-        -t|--target)
-            if [ -z "$2" ] || [[ "$2" == -* ]]; then
-                log "ERROR" "$RED" "The --target option requires an argument."
-                exit 1
-            fi
-            target="$2"
-            shift 2
-            ;;
-        -D|--discover)
-            discover=true
-            shift
-            ;;
-        -d|--directory)
-            if [ -z "$2" ] || [[ "$2" == -* ]]; then
-                log "ERROR" "$RED" "The --directory option requires an argument."
-                exit 1
-            fi
-            backup_dir="$2"
-            shift 2
-            ;;
-        -f|--firmware)
-            if [ -z "$2" ] || [[ "$2" == -* ]]; then
-                log "ERROR" "$RED" "The --firmware option requires an argument."
-                exit 1
-            fi
-            firmware_file="$2"
-            shift 2
-            ;;
-        -q|--quiet)
-            quiet=true
-            shift
-            ;;
-        backup|update|discover)
-            command="$1"
-            shift
-            ;;
-        *)
-            log "ERROR" "$RED" "Unknown argument: $1"
-            exit 1
-            ;;
-    esac
-done
-
-# Execute the appropriate command
-case "$command" in
-    discover)
-        read -ra devices <<< "$(discover_devices)"
-        for ((i=0; i<${#devices[@]}; i+=3)); do
-            hostname="${devices[$i]}"
-            address="${devices[$i+1]}"
-            port="${devices[$i+2]}"
-
-            if [ "$quiet" = true ]; then
-                echo "$hostname"
-            else
-                log "INFO" "$BLUE" "Discovered device: Hostname=$hostname, Address=$address, Port=$port"
-            fi
-        done
-        ;;
-    backup)
-        if [ -n "$target" ]; then
-            # Assume target is both the hostname and address, with port 80
-            backup_one "$target" "$target" "80"
-        elif [ "$discover" = true ]; then
-            read -ra devices <<< "$(discover_devices)"
-            for ((i=0; i<${#devices[@]}; i+=3)); do
-                hostname="${devices[$i]}"
-                address="${devices[$i+1]}"
-                port="${devices[$i+2]}"
-                backup_one "$hostname" "$address" "$port"
-            done
-        else
-            log "ERROR" "$RED" "No target specified. Use --target or --discover."
-            exit 1
-        fi
-        ;;
-    update)
-        # Validate firmware before proceeding
-        if [ -z "$firmware_file" ] || [ ! -f "$firmware_file" ]; then
-            log "ERROR" "$RED" "Please provide a file in --firmware that exists"
-            exit 1
-        fi
-        
-        if [ -n "$target" ]; then
-            # Assume target is both the hostname and address, with port 80
-            update_one "$target" "$target" "80" "$firmware_file"
-        elif [ "$discover" = true ]; then
-            read -ra devices <<< "$(discover_devices)"
-            for ((i=0; i<${#devices[@]}; i+=3)); do
-                hostname="${devices[$i]}"
-                address="${devices[$i+1]}"
-                port="${devices[$i+2]}"
-                update_one "$hostname" "$address" "$port" "$firmware_file"
-            done
-        else
-            log "ERROR" "$RED" "No target specified. Use --target or --discover."
-            exit 1
-        fi
-        ;;
-    *)
-        show_help
-        exit 1
-        ;;
-esac

usermods/ADS1115_v2/library.json

@@ -1,8 +0,0 @@
-{
-  "name": "ADS1115_v2",
-  "build": { "libArchive": false },
-  "dependencies": {
-    "Adafruit BusIO": "https://github.com/adafruit/Adafruit_BusIO#1.13.2",
-    "Adafruit ADS1X15": "https://github.com/adafruit/Adafruit_ADS1X15#2.4.0"
-  }
-}

usermods/ADS1115_v2/readme.md

@@ -6,5 +6,5 @@ Configuration is performed via the Usermod menu. There are no parameters to set
 
 ## Installation 
 
-Add 'ADS1115' to `custom_usermods` in your platformio environment.
-
+Add the build flag `-D USERMOD_ADS1115` to your platformio environment.
+Uncomment libraries with comment `#For ADS1115 sensor uncomment following`

usermods/ADS1115_v2/usermod_ads1115.h

@@ -1,3 +1,5 @@
+#pragma once
+
 #include "wled.h"
 #include <Adafruit_ADS1X15.h>
 #include <math.h>
@@ -250,7 +252,4 @@ class ADS1115Usermod : public Usermod {
         int16_t results = ads.getLastConversionResults();
         readings[activeChannel] = ads.computeVolts(results);
     }
-};
-
-static ADS1115Usermod ads1115_v2;
-REGISTER_USERMOD(ads1115_v2);
+};

usermods/AHT10_v2/README.md

@@ -22,9 +22,15 @@ Dependencies, These must be added under `lib_deps` in your `platform.ini` (or `p
 
 # Compiling
 
-To enable, add 'AHT10' to `custom_usermods` in your platformio encrionment  (e.g. in `platformio_override.ini`)
+To enable, compile with `USERMOD_AHT10` defined  (e.g. in `platformio_override.ini`)
 ```ini
 [env:aht10_example]
 extends = env:esp32dev
-custom_usermods = ${env:esp32dev.custom_usermods} AHT10
+build_flags =
+  ${common.build_flags} ${esp32.build_flags}
+  -D USERMOD_AHT10
+  ; -D USERMOD_AHT10_DEBUG ; -- add a debug status to the info modal
+lib_deps = 
+  ${esp32.lib_deps}
+  enjoyneering/AHT10@~1.1.0
 ```

usermods/AHT10_v2/library.json

@@ -1,7 +0,0 @@
-{
-  "name": "AHT10_v2",
-  "build": { "libArchive": false },  
-  "dependencies": {
-    "enjoyneering/AHT10":"~1.1.0"
-  }
-}

usermods/AHT10_v2/platformio_override.ini

@@ -2,4 +2,8 @@
 extends = env:esp32dev
 build_flags =
   ${common.build_flags} ${esp32.build_flags}
+  -D USERMOD_AHT10
   ; -D USERMOD_AHT10_DEBUG ; -- add a debug status to the info modal
+lib_deps = 
+  ${esp32.lib_deps}
+  enjoyneering/AHT10@~1.1.0

usermods/AHT10_v2/usermod_aht10.h

@@ -1,3 +1,5 @@
+#pragma once
+
 #include "wled.h"
 #include <AHT10.h>
 
@@ -52,6 +54,12 @@ private:
     _lastTemperature = 0;
   }
 
+  ~UsermodAHT10()
+  {
+    delete _aht;
+    _aht = nullptr;
+  }
+
 #ifndef WLED_DISABLE_MQTT
   void mqttInitialize()
   {
@@ -314,15 +322,6 @@ public:
     _initDone = true;
     return configComplete;
   }
-
-  ~UsermodAHT10()
-  {
-    delete _aht;
-    _aht = nullptr;
-  }
 };
 
-const char UsermodAHT10::_name[] PROGMEM = "AHTxx";
-
-static UsermodAHT10 aht10_v2;
-REGISTER_USERMOD(aht10_v2);
+const char UsermodAHT10::_name[] PROGMEM = "AHTxx";

usermods/Analog_Clock/Analog_Clock.h

@@ -1,3 +1,4 @@
+#pragma once
 #include "wled.h"
 
 /*
@@ -102,9 +103,9 @@ private:
     void secondsEffectSineFade(int16_t secondLed, Toki::Time const& time) {
         uint32_t ms = time.ms % 1000;
         uint8_t b0 = (cos8_t(ms * 64 / 1000) - 128) * 2;
-        setPixelColor(secondLed, scale32(secondColor, b0));
+        setPixelColor(secondLed, gamma32(scale32(secondColor, b0)));
         uint8_t b1 = (sin8_t(ms * 64 / 1000) - 128) * 2;
-        setPixelColor(inc(secondLed, 1, secondsSegment), scale32(secondColor, b1));
+        setPixelColor(inc(secondLed, 1, secondsSegment), gamma32(scale32(secondColor, b1)));
     }
 
     static inline uint32_t qadd32(uint32_t c1, uint32_t c2) {
@@ -191,7 +192,7 @@ public:
             // for (uint16_t i = 1; i < secondsTrail + 1; ++i) {
             //     uint16_t trailLed = dec(secondLed, i, secondsSegment);
             //     uint8_t trailBright = 255 / (secondsTrail + 1) * (secondsTrail - i + 1);
-            //     setPixelColor(trailLed, scale32(secondColor, trailBright));
+            //     setPixelColor(trailLed, gamma32(scale32(secondColor, trailBright)));
             // }
         }
 
@@ -253,7 +254,3 @@ public:
         return USERMOD_ID_ANALOG_CLOCK;
     }
 };
-
-
-static AnalogClockUsermod analog_clock;
-REGISTER_USERMOD(analog_clock);

usermods/Analog_Clock/library.json

@@ -1,4 +0,0 @@
-{
-  "name": "Analog_Clock",
-  "build": { "libArchive": false }
-}

usermods/Animated_Staircase/Animated_Staircase.h

@@ -7,6 +7,7 @@
  * 
  * See the accompanying README.md file for more info.
  */
+#pragma once
 #include "wled.h"
 
 class Animated_Staircase : public Usermod {
@@ -561,7 +562,3 @@ const char Animated_Staircase::_bottomEcho_pin[]            PROGMEM = "bottomEch
 const char Animated_Staircase::_topEchoCm[]                 PROGMEM = "top-dist-cm";
 const char Animated_Staircase::_bottomEchoCm[]              PROGMEM = "bottom-dist-cm";
 const char Animated_Staircase::_togglePower[]               PROGMEM = "toggle-on-off";
-
-
-static Animated_Staircase animated_staircase;
-REGISTER_USERMOD(animated_staircase);

usermods/Animated_Staircase/README.md

@@ -1,5 +1,4 @@
 # Usermod Animated Staircase
-
 This usermod makes your staircase look cool by illuminating it with an animation. It uses
 PIR or ultrasonic sensors at the top and bottom of your stairs to:
 
@@ -12,15 +11,14 @@ The Animated Staircase can be controlled by the WLED API. Change settings such a
 speed, on/off time and distance by sending an HTTP request, see below.
 
 ## WLED integration
-
 To include this usermod in your WLED setup, you have to be able to [compile WLED from source](https://kno.wled.ge/advanced/compiling-wled/).
 
 Before compiling, you have to make the following modifications:
 
-Edit your environment in `platformio_override.ini`
-
-1. Open `platformio_override.ini`
-2. add `Animated_Staircase` to the `custom_usermods` line for your environment
+Edit `usermods_list.cpp`:
+1. Open `wled00/usermods_list.cpp`
+2. add `#include "../usermods/Animated_Staircase/Animated_Staircase.h"` to the top of the file
+3. add `UsermodManager::add(new Animated_Staircase());` to the end of the `void registerUsermods()` function.
 
 You can configure usermod using the Usermods settings page.
 Please enter GPIO pins for PIR or ultrasonic sensors (trigger and echo).
@@ -28,10 +26,10 @@ If you use PIR sensor enter -1 for echo pin.
 Maximum distance for ultrasonic sensor can be configured as the time needed for an echo (see below).
 
 ## Hardware installation
-
 1. Attach the LED strip to each step of the stairs.
 2. Connect the ESP8266 pin D4 or ESP32 pin D2 to the first LED data pin at the bottom step.
-3. Connect the data-out pin at the end of each strip per step to the data-in pin on the next step, creating one large virtual LED strip.
+3. Connect the data-out pin at the end of each strip per step to the data-in pin on the 
+   next step, creating one large virtual LED strip.
 4. Mount sensors of choice at the bottom and top of the stairs and connect them to the ESP.
 5. To make sure all LEDs get enough power and have your staircase lighted evenly, power each
    step from one side, using at least AWG14 or 2.5mm^2 cable. Don't connect them serial as you
@@ -40,23 +38,24 @@ Maximum distance for ultrasonic sensor can be configured as the time needed for
 You _may_ need to use 10k pull-down resistors on the selected PIR pins, depending on the sensor.
 
 ## WLED configuration
-
-1. In the WLED UI, configure a segment for each step. The lowest step of the stairs is the lowest segment id.
-2. Save your segments into a preset.
-3. Ideally, add the preset in the config > LED setup menu to the "apply preset **n** at boot" setting.
+1. In the WLED UI, configure a segment for each step. The lowest step of the stairs is the 
+   lowest segment id. 
+2. Save your segments into a preset. 
+3. Ideally, add the preset in the config > LED setup menu to the "apply 
+   preset **n** at boot" setting.
 
 ## Changing behavior through API
-
 The Staircase settings can be changed through the WLED JSON api.
 
 **NOTE:** We are using [curl](https://curl.se/) to send HTTP POSTs to the WLED API.
 If you're using Windows and want to use the curl commands, replace the `\` with a `^`
 or remove them and put everything on one line.
 
+
 | Setting          | Description                                                   | Default |
 |------------------|---------------------------------------------------------------|---------|
 | enabled          | Enable or disable the usermod                                 | true    |
-| bottom-sensor    | Manually trigger a down to up animation via API               | false   |
+| bottom-sensor    | Manually trigger a down to up animation via API               | false   | 
 | top-sensor       | Manually trigger an up to down animation via API              | false   |
 
 
@@ -76,7 +75,6 @@ The staircase settings and sensor states are inside the WLED "state" element:
 ```
 
 ### Enable/disable the usermod
-
 By disabling the usermod you will be able to keep the LED's on, independent from the sensor
 activity. This enables you to play with the lights without the usermod switching them on or off.
 
@@ -93,7 +91,6 @@ To enable the usermod again, use `"enabled":true`.
 Alternatively you can use _Usermod_ Settings page where you can change other parameters as well.
 
 ### Changing animation parameters and detection range of the ultrasonic HC-SR04 sensor
-
 Using _Usermod_ Settings page you can define different usermod parameters, including sensor pins, delay between segment activation etc.
 
 When an ultrasonic sensor is enabled you can enter maximum detection distance in centimeters separately for top and bottom sensors.
@@ -103,7 +100,6 @@ distances creates delays in the WLED software, _might_ introduce timing hiccups
 a less responsive web interface. It is therefore advised to keep the detection distance as short as possible.
 
 ### Animation triggering through the API
-
 In addition to activation by one of the stair sensors, you can also trigger the animation manually
 via the API. To simulate triggering the bottom sensor, use:
 
@@ -120,19 +116,15 @@ curl -X POST -H "Content-Type: application/json" \
      -d '{"staircase":{"top-sensor":true}}' \
      xxx.xxx.xxx.xxx/json/state
 ```
-
 **MQTT**
 You can publish a message with either `up` or `down` on topic `/swipe` to trigger animation.
 You can also use `on` or `off` for enabling or disabling the usermod.
 
-Have fun with this usermod
-
-`www.rolfje.com`
+Have fun with this usermod.<br/>
+www.rolfje.com
 
 Modifications @blazoncek
 
 ## Change log
-
 2021-04
-
-- Adaptation for runtime configuration.
+* Adaptation for runtime configuration.

usermods/Animated_Staircase/library.json

@@ -1,4 +0,0 @@
-{
-  "name": "Animated_Staircase",
-  "build": { "libArchive": false }
-}

usermods/BH1750_v2/BH1750_v2.cpp

@@ -1,186 +0,0 @@
-// force the compiler to show a warning to confirm that this file is included
-#warning **** Included USERMOD_BH1750 ****
-
-#include "wled.h"
-#include "BH1750_v2.h"
-
-#ifdef WLED_DISABLE_MQTT
-#error "This user mod requires MQTT to be enabled."
-#endif
-
-static bool checkBoundSensor(float newValue, float prevValue, float maxDiff)
-{
-  return isnan(prevValue) || newValue <= prevValue - maxDiff || newValue >= prevValue + maxDiff || (newValue == 0.0 && prevValue > 0.0);
-}
-
-void Usermod_BH1750::_mqttInitialize()
-{
-  mqttLuminanceTopic = String(mqttDeviceTopic) + F("/brightness");
-
-  if (HomeAssistantDiscovery) _createMqttSensor(F("Brightness"), mqttLuminanceTopic, F("Illuminance"), F(" lx"));
-}
-
-// Create an MQTT Sensor for Home Assistant Discovery purposes, this includes a pointer to the topic that is published to in the Loop.
-void Usermod_BH1750::_createMqttSensor(const String &name, const String &topic, const String &deviceClass, const String &unitOfMeasurement)
-{
-  String t = String(F("homeassistant/sensor/")) + mqttClientID + F("/") + name + F("/config");
-  
-  StaticJsonDocument<600> doc;
-  
-  doc[F("name")] = String(serverDescription) + " " + name;
-  doc[F("state_topic")] = topic;
-  doc[F("unique_id")] = String(mqttClientID) + name;
-  if (unitOfMeasurement != "")
-    doc[F("unit_of_measurement")] = unitOfMeasurement;
-  if (deviceClass != "")
-    doc[F("device_class")] = deviceClass;
-  doc[F("expire_after")] = 1800;
-
-  JsonObject device = doc.createNestedObject(F("device")); // attach the sensor to the same device
-  device[F("name")] = serverDescription;
-  device[F("identifiers")] = "wled-sensor-" + String(mqttClientID);
-  device[F("manufacturer")] = F(WLED_BRAND);
-  device[F("model")] = F(WLED_PRODUCT_NAME);
-  device[F("sw_version")] = versionString;
-
-  String temp;
-  serializeJson(doc, temp);
-  DEBUG_PRINTLN(t);
-  DEBUG_PRINTLN(temp);
-
-  mqtt->publish(t.c_str(), 0, true, temp.c_str());
-}
-
-void Usermod_BH1750::setup()
-{
-  if (i2c_scl<0 || i2c_sda<0) { enabled = false; return; }
-  sensorFound = lightMeter.begin();
-  initDone = true;
-}
-
-void Usermod_BH1750::loop()
-{
-  if ((!enabled) || strip.isUpdating())
-    return;
-
-  unsigned long now = millis();
-
-  // check to see if we are due for taking a measurement
-  // lastMeasurement will not be updated until the conversion
-  // is complete the the reading is finished
-  if (now - lastMeasurement < minReadingInterval)
-  {
-    return;
-  }
-
-  bool shouldUpdate = now - lastSend > maxReadingInterval;
-
-  float lux = lightMeter.readLightLevel();
-  lastMeasurement = millis();
-  getLuminanceComplete = true;
-
-  if (shouldUpdate || checkBoundSensor(lux, lastLux, offset))
-  {
-    lastLux = lux;
-    lastSend = millis();
-
-    if (WLED_MQTT_CONNECTED)
-    {
-      if (!mqttInitialized)
-        {
-          _mqttInitialize();
-          mqttInitialized = true;
-        }
-      mqtt->publish(mqttLuminanceTopic.c_str(), 0, true, String(lux).c_str());
-      DEBUG_PRINTLN(F("Brightness: ") + String(lux) + F("lx"));
-    }
-    else
-    {
-      DEBUG_PRINTLN(F("Missing MQTT connection. Not publishing data"));
-    }
-  }
-}
-
-
-void Usermod_BH1750::addToJsonInfo(JsonObject &root)
-{
-  JsonObject user = root[F("u")];
-  if (user.isNull())
-    user = root.createNestedObject(F("u"));
-
-  JsonArray lux_json = user.createNestedArray(F("Luminance"));
-  if (!enabled) {
-    lux_json.add(F("disabled"));
-  } else if (!sensorFound) {
-      // if no sensor 
-      lux_json.add(F("BH1750 "));
-      lux_json.add(F("Not Found"));
-  } else if (!getLuminanceComplete) {
-    // if we haven't read the sensor yet, let the user know
-      // that we are still waiting for the first measurement
-      lux_json.add((USERMOD_BH1750_FIRST_MEASUREMENT_AT - millis()) / 1000);
-      lux_json.add(F(" sec until read"));
-      return;
-  } else {
-    lux_json.add(lastLux);
-    lux_json.add(F(" lx"));
-  }
-}
-
-// (called from set.cpp) stores persistent properties to cfg.json
-void Usermod_BH1750::addToConfig(JsonObject &root)
-{
-  // we add JSON object.
-  JsonObject top = root.createNestedObject(FPSTR(_name)); // usermodname
-  top[FPSTR(_enabled)] = enabled;
-  top[FPSTR(_maxReadInterval)] = maxReadingInterval;
-  top[FPSTR(_minReadInterval)] = minReadingInterval;
-  top[FPSTR(_HomeAssistantDiscovery)] = HomeAssistantDiscovery;
-  top[FPSTR(_offset)] = offset;
-
-  DEBUG_PRINTLN(F("BH1750 config saved."));
-}
-
-// called before setup() to populate properties from values stored in cfg.json
-bool Usermod_BH1750::readFromConfig(JsonObject &root)
-{
-  // we look for JSON object.
-  JsonObject top = root[FPSTR(_name)];
-  if (top.isNull())
-  {
-    DEBUG_PRINT(FPSTR(_name));
-    DEBUG_PRINT(F("BH1750"));
-    DEBUG_PRINTLN(F(": No config found. (Using defaults.)"));
-    return false;
-  }
-  bool configComplete = !top.isNull();
-
-  configComplete &= getJsonValue(top[FPSTR(_enabled)], enabled, false);
-  configComplete &= getJsonValue(top[FPSTR(_maxReadInterval)], maxReadingInterval, 10000); //ms
-  configComplete &= getJsonValue(top[FPSTR(_minReadInterval)], minReadingInterval, 500); //ms
-  configComplete &= getJsonValue(top[FPSTR(_HomeAssistantDiscovery)], HomeAssistantDiscovery, false);
-  configComplete &= getJsonValue(top[FPSTR(_offset)], offset, 1);
-
-  DEBUG_PRINT(FPSTR(_name));
-  if (!initDone) {
-    DEBUG_PRINTLN(F(" config loaded."));
-  } else {
-    DEBUG_PRINTLN(F(" config (re)loaded."));
-  }
-
-  return configComplete;
-  
-}
-
-
-// strings to reduce flash memory usage (used more than twice)
-const char Usermod_BH1750::_name[] PROGMEM = "BH1750";
-const char Usermod_BH1750::_enabled[] PROGMEM = "enabled";
-const char Usermod_BH1750::_maxReadInterval[] PROGMEM = "max-read-interval-ms";
-const char Usermod_BH1750::_minReadInterval[] PROGMEM = "min-read-interval-ms";
-const char Usermod_BH1750::_HomeAssistantDiscovery[] PROGMEM = "HomeAssistantDiscoveryLux";
-const char Usermod_BH1750::_offset[] PROGMEM = "offset-lx";
-
-
-static Usermod_BH1750 bh1750_v2;
-REGISTER_USERMOD(bh1750_v2);

usermods/BH1750_v2/BH1750_v2.h

@@ -1,92 +0,0 @@
-
-#pragma once
-#include "wled.h"
-#include <BH1750.h>
-
-#ifdef WLED_DISABLE_MQTT
-#error "This user mod requires MQTT to be enabled."
-#endif
-
-// the max frequency to check photoresistor, 10 seconds
-#ifndef USERMOD_BH1750_MAX_MEASUREMENT_INTERVAL
-#define USERMOD_BH1750_MAX_MEASUREMENT_INTERVAL 10000
-#endif
-
-// the min frequency to check photoresistor, 500 ms
-#ifndef USERMOD_BH1750_MIN_MEASUREMENT_INTERVAL
-#define USERMOD_BH1750_MIN_MEASUREMENT_INTERVAL 500
-#endif
-
-// how many seconds after boot to take first measurement, 10 seconds
-#ifndef USERMOD_BH1750_FIRST_MEASUREMENT_AT
-#define USERMOD_BH1750_FIRST_MEASUREMENT_AT 10000
-#endif
-
-// only report if difference grater than offset value
-#ifndef USERMOD_BH1750_OFFSET_VALUE
-#define USERMOD_BH1750_OFFSET_VALUE 1
-#endif
-
-class Usermod_BH1750 : public Usermod
-{
-private:
-  int8_t offset = USERMOD_BH1750_OFFSET_VALUE;
-
-  unsigned long maxReadingInterval = USERMOD_BH1750_MAX_MEASUREMENT_INTERVAL;
-  unsigned long minReadingInterval = USERMOD_BH1750_MIN_MEASUREMENT_INTERVAL;
-  unsigned long lastMeasurement = UINT32_MAX - (USERMOD_BH1750_MAX_MEASUREMENT_INTERVAL - USERMOD_BH1750_FIRST_MEASUREMENT_AT);
-  unsigned long lastSend = UINT32_MAX - (USERMOD_BH1750_MAX_MEASUREMENT_INTERVAL - USERMOD_BH1750_FIRST_MEASUREMENT_AT);
-  // flag to indicate we have finished the first readLightLevel call
-  // allows this library to report to the user how long until the first
-  // measurement
-  bool getLuminanceComplete = false;
-
-  // flag set at startup
-  bool enabled = true;
-
-  // strings to reduce flash memory usage (used more than twice)
-  static const char _name[];
-  static const char _enabled[];
-  static const char _maxReadInterval[];
-  static const char _minReadInterval[];
-  static const char _offset[];
-  static const char _HomeAssistantDiscovery[];
-
-  bool initDone = false;
-  bool sensorFound = false;
-
-  // Home Assistant and MQTT  
-  String mqttLuminanceTopic;
-  bool mqttInitialized = false;
-  bool HomeAssistantDiscovery = true; // Publish Home Assistant Discovery messages
-
-  BH1750 lightMeter;
-  float lastLux = -1000;
-
-  // set up Home Assistant discovery entries
-  void _mqttInitialize();
-
-  // Create an MQTT Sensor for Home Assistant Discovery purposes, this includes a pointer to the topic that is published to in the Loop.
-  void _createMqttSensor(const String &name, const String &topic, const String &deviceClass, const String &unitOfMeasurement);
-
-public:
-  void setup();
-  void loop();
-  inline float getIlluminance()  {
-    return (float)lastLux;
-  }
-
-  void addToJsonInfo(JsonObject &root);
-
-  // (called from set.cpp) stores persistent properties to cfg.json
-  void addToConfig(JsonObject &root);
-
-  // called before setup() to populate properties from values stored in cfg.json
-  bool readFromConfig(JsonObject &root);
-
-  inline uint16_t getId()
-  {
-    return USERMOD_ID_BH1750;
-  }
-
-};

usermods/BH1750_v2/library.json

@@ -1,7 +0,0 @@
-{
-  "name": "BH1750_v2",
-  "build": { "libArchive": false },
-  "dependencies": {
-    "claws/BH1750":"^1.2.0"
-  }
-}

usermods/BH1750_v2/readme.md

@@ -4,40 +4,43 @@ This usermod will read from an ambient light sensor like the BH1750.
 The luminance is displayed in both the Info section of the web UI, as well as published to the `/luminance` MQTT topic if enabled.
 
 ## Dependencies
-
 - Libraries
   - `claws/BH1750 @^1.2.0`
+  - This must be added under `lib_deps` in your `platformio.ini` (or `platformio_override.ini`).
 - Data is published over MQTT - make sure you've enabled the MQTT sync interface.
 
 ## Compilation
 
-To enable, compile with `BH1750` in `custom_usermods` (e.g. in `platformio_override.ini`)
+To enable, compile with `USERMOD_BH1750` defined  (e.g. in `platformio_override.ini`)
+```ini
+[env:usermod_BH1750_d1_mini]
+extends = env:d1_mini
+build_flags =
+    ${common.build_flags_esp8266}
+    -D USERMOD_BH1750
+lib_deps = 
+    ${esp8266.lib_deps}
+    claws/BH1750 @ ^1.2.0
+```
 
 ### Configuration Options
-
 The following settings can be set at compile-time but are configurable on the usermod menu (except First Measurement time):
-
-- `USERMOD_BH1750_MAX_MEASUREMENT_INTERVAL` - the max number of milliseconds between measurements, defaults to 10000ms
-- `USERMOD_BH1750_MIN_MEASUREMENT_INTERVAL` - the min number of milliseconds between measurements, defaults to 500ms
-- `USERMOD_BH1750_OFFSET_VALUE` - the offset value to report on, defaults to 1
-- `USERMOD_BH1750_FIRST_MEASUREMENT_AT` - the number of milliseconds after boot to take first measurement, defaults to 10000 ms
+*   `USERMOD_BH1750_MAX_MEASUREMENT_INTERVAL` - the max number of milliseconds between measurements, defaults to 10000ms
+*   `USERMOD_BH1750_MIN_MEASUREMENT_INTERVAL` - the min number of milliseconds between measurements, defaults to 500ms
+*   `USERMOD_BH1750_OFFSET_VALUE` - the offset value to report on, defaults to 1
+*   `USERMOD_BH1750_FIRST_MEASUREMENT_AT` - the number of milliseconds after boot to take first measurement, defaults to 10000 ms
 
 In addition, the Usermod screen allows you to:
-
 - enable/disable the usermod
 - Enable Home Assistant Discovery of usermod
 - Configure the SCL/SDA pins
 
 ## API
-
 The following method is available to interact with the usermod from other code modules:
-
 - `getIlluminance` read the brightness from the sensor
 
 ## Change Log
-
 Jul 2022
-
 - Added Home Assistant Discovery
 - Implemented PinManager to register pins
 - Made pins configurable in usermod menu

usermods/BH1750_v2/usermod_bh1750.h

@@ -0,0 +1,252 @@
+// force the compiler to show a warning to confirm that this file is included
+#warning **** Included USERMOD_BH1750 ****
+
+#ifndef WLED_ENABLE_MQTT
+#error "This user mod requires MQTT to be enabled."
+#endif
+
+#pragma once
+
+#include "wled.h"
+#include <BH1750.h>
+
+// the max frequency to check photoresistor, 10 seconds
+#ifndef USERMOD_BH1750_MAX_MEASUREMENT_INTERVAL
+#define USERMOD_BH1750_MAX_MEASUREMENT_INTERVAL 10000
+#endif
+
+// the min frequency to check photoresistor, 500 ms
+#ifndef USERMOD_BH1750_MIN_MEASUREMENT_INTERVAL
+#define USERMOD_BH1750_MIN_MEASUREMENT_INTERVAL 500
+#endif
+
+// how many seconds after boot to take first measurement, 10 seconds
+#ifndef USERMOD_BH1750_FIRST_MEASUREMENT_AT
+#define USERMOD_BH1750_FIRST_MEASUREMENT_AT 10000
+#endif
+
+// only report if difference grater than offset value
+#ifndef USERMOD_BH1750_OFFSET_VALUE
+#define USERMOD_BH1750_OFFSET_VALUE 1
+#endif
+
+class Usermod_BH1750 : public Usermod
+{
+private:
+  int8_t offset = USERMOD_BH1750_OFFSET_VALUE;
+
+  unsigned long maxReadingInterval = USERMOD_BH1750_MAX_MEASUREMENT_INTERVAL;
+  unsigned long minReadingInterval = USERMOD_BH1750_MIN_MEASUREMENT_INTERVAL;
+  unsigned long lastMeasurement = UINT32_MAX - (USERMOD_BH1750_MAX_MEASUREMENT_INTERVAL - USERMOD_BH1750_FIRST_MEASUREMENT_AT);
+  unsigned long lastSend = UINT32_MAX - (USERMOD_BH1750_MAX_MEASUREMENT_INTERVAL - USERMOD_BH1750_FIRST_MEASUREMENT_AT);
+  // flag to indicate we have finished the first readLightLevel call
+  // allows this library to report to the user how long until the first
+  // measurement
+  bool getLuminanceComplete = false;
+
+  // flag set at startup
+  bool enabled = true;
+
+  // strings to reduce flash memory usage (used more than twice)
+  static const char _name[];
+  static const char _enabled[];
+  static const char _maxReadInterval[];
+  static const char _minReadInterval[];
+  static const char _offset[];
+  static const char _HomeAssistantDiscovery[];
+
+  bool initDone = false;
+  bool sensorFound = false;
+
+  // Home Assistant and MQTT  
+  String mqttLuminanceTopic;
+  bool mqttInitialized = false;
+  bool HomeAssistantDiscovery = true; // Publish Home Assistant Discovery messages
+
+  BH1750 lightMeter;
+  float lastLux = -1000;
+
+  bool checkBoundSensor(float newValue, float prevValue, float maxDiff)
+  {
+    return isnan(prevValue) || newValue <= prevValue - maxDiff || newValue >= prevValue + maxDiff || (newValue == 0.0 && prevValue > 0.0);
+  }
+  
+  // set up Home Assistant discovery entries
+  void _mqttInitialize()
+  {
+    mqttLuminanceTopic = String(mqttDeviceTopic) + F("/brightness");
+
+    if (HomeAssistantDiscovery) _createMqttSensor(F("Brightness"), mqttLuminanceTopic, F("Illuminance"), F(" lx"));
+  }
+
+  // Create an MQTT Sensor for Home Assistant Discovery purposes, this includes a pointer to the topic that is published to in the Loop.
+  void _createMqttSensor(const String &name, const String &topic, const String &deviceClass, const String &unitOfMeasurement)
+  {
+    String t = String(F("homeassistant/sensor/")) + mqttClientID + F("/") + name + F("/config");
+    
+    StaticJsonDocument<600> doc;
+    
+    doc[F("name")] = String(serverDescription) + " " + name;
+    doc[F("state_topic")] = topic;
+    doc[F("unique_id")] = String(mqttClientID) + name;
+    if (unitOfMeasurement != "")
+      doc[F("unit_of_measurement")] = unitOfMeasurement;
+    if (deviceClass != "")
+      doc[F("device_class")] = deviceClass;
+    doc[F("expire_after")] = 1800;
+
+    JsonObject device = doc.createNestedObject(F("device")); // attach the sensor to the same device
+    device[F("name")] = serverDescription;
+    device[F("identifiers")] = "wled-sensor-" + String(mqttClientID);
+    device[F("manufacturer")] = F(WLED_BRAND);
+    device[F("model")] = F(WLED_PRODUCT_NAME);
+    device[F("sw_version")] = versionString;
+
+    String temp;
+    serializeJson(doc, temp);
+    DEBUG_PRINTLN(t);
+    DEBUG_PRINTLN(temp);
+
+    mqtt->publish(t.c_str(), 0, true, temp.c_str());
+  }
+
+public:
+  void setup()
+  {
+    if (i2c_scl<0 || i2c_sda<0) { enabled = false; return; }
+    sensorFound = lightMeter.begin();
+    initDone = true;
+  }
+
+  void loop()
+  {
+    if ((!enabled) || strip.isUpdating())
+      return;
+
+    unsigned long now = millis();
+
+    // check to see if we are due for taking a measurement
+    // lastMeasurement will not be updated until the conversion
+    // is complete the the reading is finished
+    if (now - lastMeasurement < minReadingInterval)
+    {
+      return;
+    }
+
+    bool shouldUpdate = now - lastSend > maxReadingInterval;
+
+    float lux = lightMeter.readLightLevel();
+    lastMeasurement = millis();
+    getLuminanceComplete = true;
+
+    if (shouldUpdate || checkBoundSensor(lux, lastLux, offset))
+    {
+      lastLux = lux;
+      lastSend = millis();
+#ifndef WLED_DISABLE_MQTT
+      if (WLED_MQTT_CONNECTED)
+      {
+        if (!mqttInitialized)
+          {
+            _mqttInitialize();
+            mqttInitialized = true;
+          }
+        mqtt->publish(mqttLuminanceTopic.c_str(), 0, true, String(lux).c_str());
+        DEBUG_PRINTLN(F("Brightness: ") + String(lux) + F("lx"));
+      }
+      else
+      {
+        DEBUG_PRINTLN(F("Missing MQTT connection. Not publishing data"));
+      }
+#endif
+    }
+  }
+
+  inline float getIlluminance() {
+    return (float)lastLux;
+  }
+
+  void addToJsonInfo(JsonObject &root)
+  {
+    JsonObject user = root[F("u")];
+    if (user.isNull())
+      user = root.createNestedObject(F("u"));
+
+    JsonArray lux_json = user.createNestedArray(F("Luminance"));
+    if (!enabled) {
+      lux_json.add(F("disabled"));
+    } else if (!sensorFound) {
+        // if no sensor 
+        lux_json.add(F("BH1750 "));
+        lux_json.add(F("Not Found"));
+    } else if (!getLuminanceComplete) {
+      // if we haven't read the sensor yet, let the user know
+        // that we are still waiting for the first measurement
+        lux_json.add((USERMOD_BH1750_FIRST_MEASUREMENT_AT - millis()) / 1000);
+        lux_json.add(F(" sec until read"));
+        return;
+    } else {
+      lux_json.add(lastLux);
+      lux_json.add(F(" lx"));
+    }
+  }
+
+  // (called from set.cpp) stores persistent properties to cfg.json
+  void addToConfig(JsonObject &root)
+  {
+    // we add JSON object.
+    JsonObject top = root.createNestedObject(FPSTR(_name)); // usermodname
+    top[FPSTR(_enabled)] = enabled;
+    top[FPSTR(_maxReadInterval)] = maxReadingInterval;
+    top[FPSTR(_minReadInterval)] = minReadingInterval;
+    top[FPSTR(_HomeAssistantDiscovery)] = HomeAssistantDiscovery;
+    top[FPSTR(_offset)] = offset;
+
+    DEBUG_PRINTLN(F("BH1750 config saved."));
+  }
+
+  // called before setup() to populate properties from values stored in cfg.json
+  bool readFromConfig(JsonObject &root)
+  {
+    // we look for JSON object.
+    JsonObject top = root[FPSTR(_name)];
+    if (top.isNull())
+    {
+      DEBUG_PRINT(FPSTR(_name));
+      DEBUG_PRINT(F("BH1750"));
+      DEBUG_PRINTLN(F(": No config found. (Using defaults.)"));
+      return false;
+    }
+    bool configComplete = !top.isNull();
+
+    configComplete &= getJsonValue(top[FPSTR(_enabled)], enabled, false);
+    configComplete &= getJsonValue(top[FPSTR(_maxReadInterval)], maxReadingInterval, 10000); //ms
+    configComplete &= getJsonValue(top[FPSTR(_minReadInterval)], minReadingInterval, 500); //ms
+    configComplete &= getJsonValue(top[FPSTR(_HomeAssistantDiscovery)], HomeAssistantDiscovery, false);
+    configComplete &= getJsonValue(top[FPSTR(_offset)], offset, 1);
+
+    DEBUG_PRINT(FPSTR(_name));
+    if (!initDone) {
+      DEBUG_PRINTLN(F(" config loaded."));
+    } else {
+      DEBUG_PRINTLN(F(" config (re)loaded."));
+    }
+
+    return configComplete;
+    
+  }
+
+  uint16_t getId()
+  {
+    return USERMOD_ID_BH1750;
+  }
+
+};
+
+// strings to reduce flash memory usage (used more than twice)
+const char Usermod_BH1750::_name[] PROGMEM = "BH1750";
+const char Usermod_BH1750::_enabled[] PROGMEM = "enabled";
+const char Usermod_BH1750::_maxReadInterval[] PROGMEM = "max-read-interval-ms";
+const char Usermod_BH1750::_minReadInterval[] PROGMEM = "min-read-interval-ms";
+const char Usermod_BH1750::_HomeAssistantDiscovery[] PROGMEM = "HomeAssistantDiscoveryLux";
+const char Usermod_BH1750::_offset[] PROGMEM = "offset-lx";

usermods/BME280_v2/README.md

@@ -22,6 +22,7 @@ Dependencies
 - Libraries
   - `BME280@~3.0.0` (by [finitespace](https://github.com/finitespace/BME280))
   - `Wire`
+  - These must be added under `lib_deps` in your `platform.ini` (or `platform_override.ini`).
 - Data is published over MQTT - make sure you've enabled the MQTT sync interface.
 - This usermod also writes to serial (GPIO1 on ESP8266). Please make sure nothing else is listening to the serial TX pin or your board will get confused by log messages!
 
@@ -39,11 +40,17 @@ Methods also exist to read the read/calculated values from other WLED modules th
 
 # Compiling
 
-To enable, add `BME280_v2` to your `custom_usermods`  (e.g. in `platformio_override.ini`)
+To enable, compile with `USERMOD_BME280` defined  (e.g. in `platformio_override.ini`)
 ```ini
 [env:usermod_bme280_d1_mini]
 extends = env:d1_mini
-custom_usermods = ${env:d1_mini.custom_usermods} BME280_v2
+build_flags =
+  ${common.build_flags_esp8266}
+  -D USERMOD_BME280
+lib_deps = 
+  ${esp8266.lib_deps}
+  BME280@~3.0.0
+  Wire
 ```
 
 

usermods/BME280_v2/library.json

@@ -1,7 +0,0 @@
-{
-  "name": "BME280_v2",
-  "build": { "libArchive": false },
-  "dependencies": {
-    "finitespace/BME280":"~3.0.0"
-  }
-}

usermods/BME280_v2/usermod_bme280.h

@@ -1,15 +1,17 @@
 // force the compiler to show a warning to confirm that this file is included
 #warning **** Included USERMOD_BME280 version 2.0 ****
 
+#ifndef WLED_ENABLE_MQTT
+#error "This user mod requires MQTT to be enabled."
+#endif
+
+#pragma once
+
 #include "wled.h"
 #include <Arduino.h>
 #include <BME280I2C.h>               // BME280 sensor
 #include <EnvironmentCalculations.h> // BME280 extended measurements
 
-#ifdef WLED_DISABLE_MQTT
-#error "This user mod requires MQTT to be enabled."
-#endif
-
 class UsermodBME280 : public Usermod
 {
 private:
@@ -239,7 +241,7 @@ public:
         // from the UI and values read from sensor, then publish to broker
         if (temperature != lastTemperature || PublishAlways)
         {
-          publishMqtt("temperature", String(temperature, (unsigned) TemperatureDecimals).c_str());
+          publishMqtt("temperature", String(temperature, TemperatureDecimals).c_str());
         }
 
         lastTemperature = temperature; // Update last sensor temperature for next loop
@@ -252,17 +254,17 @@ public:
 
           if (humidity != lastHumidity || PublishAlways)
           {
-            publishMqtt("humidity", String(humidity, (unsigned) HumidityDecimals).c_str());
+            publishMqtt("humidity", String(humidity, HumidityDecimals).c_str());
           }
 
           if (heatIndex != lastHeatIndex || PublishAlways)
           {
-            publishMqtt("heat_index", String(heatIndex, (unsigned) TemperatureDecimals).c_str());
+            publishMqtt("heat_index", String(heatIndex, TemperatureDecimals).c_str());
           }
 
           if (dewPoint != lastDewPoint || PublishAlways)
           {
-            publishMqtt("dew_point", String(dewPoint, (unsigned) TemperatureDecimals).c_str());
+            publishMqtt("dew_point", String(dewPoint, TemperatureDecimals).c_str());
           }
 
           lastHumidity = humidity;
@@ -279,7 +281,7 @@ public:
 
         if (pressure != lastPressure || PublishAlways)
         {
-          publishMqtt("pressure", String(pressure, (unsigned) PressureDecimals).c_str());
+          publishMqtt("pressure", String(pressure, PressureDecimals).c_str());
         }
 
         lastPressure = pressure;
@@ -442,6 +444,7 @@ public:
     configComplete &= getJsonValue(top[F("PublishAlways")], PublishAlways, false);
     configComplete &= getJsonValue(top[F("UseCelsius")], UseCelsius, true);
     configComplete &= getJsonValue(top[F("HomeAssistantDiscovery")], HomeAssistantDiscovery, false);
+    tempScale = UseCelsius ? "°C" : "°F";
 
     DEBUG_PRINT(FPSTR(_name));
     if (!initDone) {
@@ -477,7 +480,3 @@ public:
 
 const char UsermodBME280::_name[]                      PROGMEM = "BME280/BMP280";
 const char UsermodBME280::_enabled[]                   PROGMEM = "enabled";
-
-
-static UsermodBME280 bme280_v2;
-REGISTER_USERMOD(bme280_v2);

usermods/BME68X_v2/README.md

@@ -1,70 +1,65 @@
 # Usermod BME68X
-
-This usermod was developed for a BME680/BME68X sensor. The BME68X is not compatible with the BME280/BMP280 chip. It has its own library. The original 'BSEC Software Library' from Bosch was used to develop the code. The measured values are displayed on the WLED info page.
+This usermod was developed for a BME680/BME68X sensor. The BME68X is not compatible with the BME280/BMP280 chip. It has its own library. The original 'BSEC Software Library' from Bosch was used to develop the code. The measured values are displayed on the WLED info page. 
 
 <p align="center"><img src="pics/pic1.png" style="width:60%;"></p>
 
 In addition, the values are published on MQTT if this is active. The topic used for this is: 'wled/[MQTT Client ID]'. The Client ID is set in the WLED MQTT settings.
-
 <p align="center"><img src="pics/pic2.png"></p>
 
 If you use HomeAssistance discovery, the device tree for HomeAssistance is created.  This is published under the topic 'homeassistant/sensor/[MQTT Client ID]' via MQTT.
-
 <p align="center"><img src="pics/pic3.png"></p>
 
 A device with the following sensors appears in HomeAssistant. Please note that MQTT must be activated in HomeAssistant.
-
 <p align="center"><img src="pics/pic4.png" style="width:60%;"></p>
 
-## Features
 
+## Features
 Raw sensor types
 
-Sensor		Accuracy	Scale		Range
------------------------------
+	Sensor		Accuracy	Scale		Range
+ 	--------------------------------------------------------------------------------------------------
+	Temperature	+/- 1.0		°C/°F		-40 to 85 °C
+	Humidity	+/- 3 		%		0 to 100 %
+	Pressure	+/- 1 		hPa		300 to 1100 hPa
+	Gas Resistance			Ohm
 
-Temperature	+/- 1.0		°C/°F		-40 to 85 °C
-Humidity	+/- 3 		%		0 to 100 %
-Pressure	+/- 1 		hPa		300 to 1100 hPa
-Gas Resistance			Ohm
 The BSEC Library calculates the following values via the gas resistance
 
-Sensor		Accuracy	Scale		Range
------------------------------
+	Sensor		Accuracy	Scale		Range
+ 	--------------------------------------------------------------------------------------------------
+	IAQ 						value between 0 and 500
+	Static IAQ 					same as IAQ but for permanently installed devices
+	CO2 				PPM
+	VOC 				PPM
+	Gas-Percentage 			%
+
 
-IAQ 						value between 0 and 500
-Static IAQ 					same as IAQ but for permanently installed devices
-CO2 				PPM
-VOC 				PPM
-Gas-Percentage 			%
 In addition the usermod calculates
 
-Sensor		Accuracy	Scale		Range
------------------------------
-
-Absolute humidity	 	g/m³
-Dew point 			°C/°F
+	Sensor		Accuracy	Scale		Range
+ 	--------------------------------------------------------------------------------------------------
+	Absolute humidity	 	g/m³
+	Dew point 			°C/°F
 
 ### IAQ (Indoor Air Quality)
-
-The IAQ is divided into the following value groups.
-
+The IAQ is divided into the following value groups. 
 <p align="center"><img src="pics/pic5.png"></p>
 
 For more detailed information, please consult the enclosed Bosch product description (BME680.pdf).
 
+
 ## Calibration of the device
 
-The gas sensor of the BME68X must be calibrated. This differs from the BME280, which does not require any calibration.
+The gas sensor of the BME68X must be calibrated. This differs from the BME280, which does not require any calibration. 
 There is a range of additional information for this, which the driver also provides. These values can be found in HomeAssistant under Diagnostics.
 
 - **STABILIZATION_STATUS**: Gas sensor stabilization status [boolean] Indicates initial stabilization status of the gas sensor element: stabilization is ongoing (0) or stabilization is finished (1).
 - **RUN_IN_STATUS**: 	Gas sensor run-in status [boolean] Indicates power-on stabilization status of the gas sensor element: stabilization is ongoing (0) or stabilization is finished (1)
 
-Furthermore, all GAS based values have their own accuracy value. These have the following meaning:
+Furthermore, all GAS based values have their own accuracy value. These have the following meaning: 
 
-- **Accuracy = 0** 	means the sensor is being stabilized (this can take a while on the first run)
-- **Accuracy = 1**	means that the previous measured values show too few differences and cannot be used for calibration. If the sensor is at accuracy 1 for too long, you must ensure that the ambient air is chaning. Opening the windows is fine. Or sometimes it is sufficient to breathe on the sensor for approx. 5 minutes.
+- **Accuracy = 0** 	means the sensor is being stabilized (this can take a while on the first run) 
+- **Accuracy = 1**	means that the previous measured values show too few differences and cannot be used for calibration. If the sensor is at accuracy 1 for too long, you must ensure that the ambient air is chaning. Opening the windows is fine. Or sometimes it is sufficient to breathe on the sensor for approx. 5 minutes. 
 - **Accuracy = 2**	means the sensor is currently calibrating.
 - **Accuracy = 3**	means that the sensor has been successfully calibrated. Once accuracy 3 is reached, the calibration data is automatically written to the file system. This calibration data will be used again at the next start and will speed up the calibration.
 
@@ -72,29 +67,28 @@ The IAQ index is therefore only meaningful if IAQ Accuracy = 3. In addition to t
 
 Reasonably reliable values are therefore only achieved when accuracy displays the value 3.
 
+
+
 ## Settings
-
-The settings of the usermods are set in the usermod section of wled.
-
+The settings of the usermods are set in the usermod section of wled. 
 <p align="center"><img src="pics/pic6.png"></p>
 
 The possible settings are
 
 - **Enable:**			Enables / disables the usermod
 - **I2C address:**		I2C address of the sensor. You can choose between 0X77 & 0X76. The default is 0x77.
-- **Interval:**			Specifies the interval of seconds at which the usermod should be executed. The default is every second.
-- **Pub Chages Only:**		If this item is active, the values are only published if they have changed since the last publication.
-- **Pub Accuracy:**		The Accuracy values associated with the gas values are also published.
-- **Pub Calib State:**		If this item is active, STABILIZATION_STATUS& RUN_IN_STATUS are also published.
+- **Interval:**			Specifies the interval of seconds at which the usermod should be executed. The default is every second. 
+- **Pub Chages Only:**		If this item is active, the values are only published if they have changed since the last publication. 
+- **Pub Accuracy:**		The Accuracy values associated with the gas values are also published. 
+- **Pub Calib State:**		If this item is active, STABILIZATION_STATUS& RUN_IN_STATUS are also published. 
 - **Temp Scale:**		Here you can choose between °C and °F.
-- **Temp Offset:**		The temperature offset is always set in °C. It must be converted for Fahrenheit.
-- **HA Discovery:**		If this item is active, the HomeAssistant sensor tree is created.
+- **Temp Offset:**		The temperature offset is always set in °C. It must be converted for Fahrenheit. 
+- **HA Discovery:**		If this item is active, the HomeAssistant sensor tree is created. 
 - **Pause While WLED Active:**	If WLED has many LEDs to calculate, the computing power may no longer be sufficient to calculate the LEDs and read the sensor data. The LEDs then hang for a few microseconds, which can be seen. If this point is active, no sensor data is fetched as long as WLED is running.
-- **Del Calibration Hist:**	If a check mark is set here, the calibration file saved in the file system is deleted when the settings are saved.
+- **Del Calibration Hist:**	If a check mark is set here, the calibration file saved in the file system is deleted when the settings are saved. 
 
 ### Sensors
-
-Applies to all sensors. The number of decimal places is set here. If the sensor is set to -1, it will no longer be published. In addition, the IAQ values can be activated here in verbal form.
+Applies to all sensors. The number of decimal places is set here. If the sensor is set to -1, it will no longer be published. In addition, the IAQ values can be activated here in verbal form. 
 
 It is recommended to use the Static IAQ for the IAQ values. This is recommended by Bosch for statically placed devices.
 
@@ -105,9 +99,8 @@ Data is published over MQTT - make sure you've enabled the MQTT sync interface.
 In addition to outputting via MQTT, you can read the values from the Info Screen on the dashboard page of the device's web interface.
 
 Methods also exist to read the read/calculated values from other WLED modules through code.
-
 - getTemperature();	The scale °C/°F is depended to the settings
-- getHumidity();
+- getHumidity();	
 - getPressure();
 - getGasResistance();
 - getAbsoluteHumidity();
@@ -125,36 +118,32 @@ Methods also exist to read the read/calculated values from other WLED modules th
 - getStabStatus();
 - getRunInStatus();
 
-## Compilation
 
-To enable, compile with `BME68X` in `custom_usermods` (e.g. in `platformio_override.ini`)
+## Compiling
 
-Example:
+To enable, compile with `USERMOD_BME68X` defined (e.g. in `platformio_override.ini`) and add the `BSEC Software Library` to the lib_deps.
 
-```[env:esp32_mySpecial]
-extends = env:esp32dev
-custom_usermods = ${env:esp32dev.custom_usermods} BME68X
+```
+[env:esp32-BME680]
+board = 		esp32dev
+platform = 		${esp32.platform}
+platform_packages = 	${esp32.platform_packages}
+lib_deps = 		${esp32.lib_deps}
+           		boschsensortec/BSEC Software Library @ ^1.8.1492      	; USERMOD: BME680                                          
+build_unflags = 	${common.build_unflags}
+build_flags = 		${common.build_flags_esp32} 
+              		-D USERMOD_BME68X                      			; USERMOD: BME680
 ```
 
 ## Revision History
-
 ### Version 1.0.0
-
 - First version of the BME68X_v user module
-
 ### Version 1.0.1
-
 - Rebased to WELD Version 0.15
 - Reworked some default settings
 - A problem with the default settings has been fixed
 
-### Version 1.0.2
-
-* Rebased to WELD Version 0.16
-* Fixed: Solved compilation problems related to some macro naming interferences.
-
 ## Known problems
-
 - MQTT goes online at device start. Shortly afterwards it goes offline and takes quite a while until it goes online again. The problem does not come from this user module, but from the WLED core.
 - If you save the settings often, WLED can get stuck.
 - If many LEDS are connected to WLED, reading the sensor can cause a small but noticeable hang. The "Pause While WLED Active" option was introduced as a workaround.

usermods/BME68X_v2/library.json

@@ -1,7 +0,0 @@
-{
-  "name": "BME68X",
-  "build": { "libArchive": false },
-  "dependencies": {
-    "boschsensortec/BSEC Software Library":"^1.8.1492"
-  }
-}

usermods/Battery/library.json

@@ -1,4 +0,0 @@
-{
-  "name": "Battery",
-  "build": { "libArchive": false }
-}

usermods/Battery/readme.md

@@ -23,7 +23,9 @@ Enables battery level monitoring of your project.
 
 ## 🎈 Installation
 
-In `platformio_override.ini` (or `platformio.ini`)<br>Under: `custom_usermods =`, add the line: `Battery`<br><br>[Example: platformio_override.ini](assets/installation_platformio_override_ini.png) |
+| **Option 1** | **Option 2** |
+|--------------|--------------|
+| In `wled00/my_config.h`<br>Add the line: `#define USERMOD_BATTERY`<br><br>[Example: my_config.h](assets/installation_my_config_h.png) | In `platformio_override.ini` (or `platformio.ini`)<br>Under: `build_flags =`, add the line: `-D USERMOD_BATTERY`<br><br>[Example: platformio_override.ini](assets/installation_platformio_override_ini.png) |
 
 <br><br>
 

usermods/Battery/usermod_v2_Battery.h

@@ -1,3 +1,5 @@
+#pragma once
+
 #include "wled.h"
 #include "battery_defaults.h"
 #include "UMBattery.h"
@@ -855,7 +857,3 @@ const char UsermodBattery::_preset[]        PROGMEM = "preset";
 const char UsermodBattery::_duration[]      PROGMEM = "duration";
 const char UsermodBattery::_init[]          PROGMEM = "init";
 const char UsermodBattery::_haDiscovery[]   PROGMEM = "HA-discovery";
-
-
-static UsermodBattery battery;
-REGISTER_USERMOD(battery);

usermods/Cronixie/library.json

@@ -1,4 +0,0 @@
-{
-  "name": "Cronixie",
-  "build": { "libArchive": false }
-}

usermods/Cronixie/readme.md

@@ -4,5 +4,5 @@ This usermod supports driving the Cronixie M and L clock kits by Diamex.
 
 ## Installation 
 
-Compile and upload after adding `Cronixie` to `custom_usermods` of your PlatformIO environment.  
+Compile and upload after adding `-D USERMOD_CRONIXIE` to `build_flags` of your PlatformIO environment.  
 Make sure the Auto Brightness Limiter is enabled at 420mA (!) and configure 60 WS281x LEDs.

usermods/Cronixie/usermod_cronixie.h

@@ -1,3 +1,5 @@
+#pragma once
+
 #include "wled.h"
 
 class UsermodCronixie : public Usermod {
@@ -247,7 +249,7 @@ class UsermodCronixie : public Usermod {
         
         if (backlight && _digitOut[i] <11)
         {
-          uint32_t col = strip.getSegment(0).colors[1];
+          uint32_t col = gamma32(strip.getSegment(0).colors[1]);
           for (uint16_t j=o; j< o+10; j++) {
             if (j != excl) strip.setPixelColor(j, col);
           }
@@ -297,7 +299,4 @@ class UsermodCronixie : public Usermod {
     {
       return USERMOD_ID_CRONIXIE;
     }
-};
-
-static UsermodCronixie cronixie;
-REGISTER_USERMOD(cronixie);
+};

usermods/DHT/library.json

@@ -1,7 +0,0 @@
-{
-  "name": "DHT",
-  "build": { "libArchive": false},
-  "dependencies": {
-    "DHT_nonblocking":"https://github.com/alwynallan/DHT_nonblocking"
-  }
-}

usermods/DHT/platformio_override.ini

@@ -1,5 +1,6 @@
 ; Options
 ; -------
+; USERMOD_DHT                      - define this to have this user mod included wled00\usermods_list.cpp
 ; USERMOD_DHT_DHTTYPE              - DHT model: 11, 21, 22 for DHT11, DHT21, or DHT22, defaults to 22/DHT22
 ; USERMOD_DHT_PIN                  - pin to which DTH is connected, defaults to Q2 pin on QuinLed Dig-Uno's board
 ; USERMOD_DHT_CELSIUS              - define this to report temperatures in degrees celsious, otherwise fahrenheit will be reported
@@ -10,11 +11,13 @@
 
 [env:d1_mini_usermod_dht_C]
 extends = env:d1_mini
-custom_usermods = ${env:d1_mini.custom_usermods} DHT
-build_flags = ${env:d1_mini.build_flags} -D USERMOD_DHT_CELSIUS
+build_flags = ${env:d1_mini.build_flags} -D USERMOD_DHT -D USERMOD_DHT_CELSIUS
+lib_deps = ${env:d1_mini.lib_deps}
+    https://github.com/alwynallan/DHT_nonblocking
 
 [env:custom32_LEDPIN_16_usermod_dht_C]
 extends = env:custom32_LEDPIN_16
-custom_usermods = ${env:custom32_LEDPIN_16.custom_usermods} DHT
-build_flags = ${env:custom32_LEDPIN_16.build_flags} -D USERMOD_DHT_CELSIUS -D USERMOD_DHT_STATS
+build_flags = ${env:custom32_LEDPIN_16.build_flags} -D USERMOD_DHT -D USERMOD_DHT_CELSIUS -D USERMOD_DHT_STATS
+lib_deps = ${env.lib_deps}
+    https://github.com/alwynallan/DHT_nonblocking
 

usermods/DHT/readme.md

@@ -15,6 +15,7 @@ Copy the example `platformio_override.ini` to the root directory.  This file sho
 
 ### Define Your Options
 
+* `USERMOD_DHT`                      - define this to include this user mod wled00\usermods_list.cpp
 * `USERMOD_DHT_DHTTYPE`              - DHT model: 11, 21, 22 for DHT11, DHT21, or DHT22, defaults to 22/DHT22
 * `USERMOD_DHT_PIN`                  - pin to which DTH is connected, defaults to Q2 pin on QuinLed Dig-Uno's board
 * `USERMOD_DHT_CELSIUS`              - define this to report temperatures in degrees Celsius, otherwise Fahrenheit will be reported

usermods/DHT/usermod_dht.h

@@ -1,5 +1,7 @@
+#pragma once
+
 #include "wled.h"
-#ifdef WLED_DISABLE_MQTT
+#ifndef WLED_ENABLE_MQTT
 #error "This user mod requires MQTT to be enabled."
 #endif
 
@@ -243,7 +245,3 @@ class UsermodDHT : public Usermod {
     }
 
 };
-
-
-static UsermodDHT dht;
-REGISTER_USERMOD(dht);

usermods/EXAMPLE/library.json

@@ -1,5 +0,0 @@
-{
-  "name": "EXAMPLE",
-  "build": { "libArchive": false },
-  "dependencies": {}
-}

usermods/EXAMPLE_v2/readme.md

@@ -4,6 +4,7 @@ In this usermod file you can find the documentation on how to take advantage of
 
 ## Installation 
 
-Add `EXAMPLE` to `custom_usermods` in your PlatformIO environment and compile!
+Copy `usermod_v2_example.h` to the wled00 directory.  
+Uncomment the corresponding lines in `usermods_list.cpp` and compile!  
 _(You shouldn't need to actually install this, it does nothing useful)_
 

usermods/EXAMPLE_v2/usermod_v2_example.h

@@ -1,8 +1,10 @@
+#pragma once
+
 #include "wled.h"
 
 /*
  * Usermods allow you to add own functionality to WLED more easily
- * See: https://github.com/wled-dev/WLED/wiki/Add-own-functionality
+ * See: https://github.com/Aircoookie/WLED/wiki/Add-own-functionality
  * 
  * This is an example for a v2 usermod.
  * v2 usermods are class inheritance based and can (but don't have to) implement more functions, each of them is shown in this example.
@@ -402,6 +404,3 @@ void MyExampleUsermod::publishMqtt(const char* state, bool retain)
   }
 #endif
 }
-
-static MyExampleUsermod example_usermod;
-REGISTER_USERMOD(example_usermod);

usermods/EleksTube_IPS/library.json.disabled

@@ -1,8 +0,0 @@
-{
-  "name:": "EleksTube_IPS",
-  "build": { "libArchive": false },
-  "dependencies": {
-    "TFT_eSPI" : "2.5.33"
-  } 
-}
-# Seems to add 300kb to the RAM requirement???

usermods/EleksTube_IPS/usermod_elekstube_ips.h

@@ -1,3 +1,4 @@
+#pragma once
 #include "TFTs.h"
 #include "wled.h"
 
@@ -155,7 +156,3 @@ class ElekstubeIPSUsermod : public Usermod {
 const char ElekstubeIPSUsermod::_name[]         PROGMEM = "EleksTubeIPS";
 const char ElekstubeIPSUsermod::_tubeSeg[]      PROGMEM = "tubeSegment";
 const char ElekstubeIPSUsermod::_digitOffset[]  PROGMEM = "digitOffset";
-
-
-static ElekstubeIPSUsermod elekstube_ips;
-REGISTER_USERMOD(elekstube_ips);

usermods/Enclosure_with_OLED_temp_ESP07/usermod.cpp

@@ -1,12 +1,11 @@
+#ifndef WLED_ENABLE_MQTT
+#error "This user mod requires MQTT to be enabled."
+#endif
+
 #include "wled.h"
 #include <Arduino.h>
 #include <U8x8lib.h> // from https://github.com/olikraus/u8g2/
 #include <DallasTemperature.h> //Dallastemperature sensor
-
-#ifdef WLED_DISABLE_MQTT
-#error "This user mod requires MQTT to be enabled."
-#endif
-
 //The SCL and SDA pins are defined here. 
 //Lolin32 boards use SCL=5 SDA=4 
 #define U8X8_PIN_SCL 5

usermods/Enclosure_with_OLED_temp_ESP07/usermod_bme280.cpp

@@ -1,13 +1,13 @@
+#ifndef WLED_ENABLE_MQTT
+#error "This user mod requires MQTT to be enabled."
+#endif
+
 #include "wled.h"
 #include <Arduino.h>
 #include <U8x8lib.h> // from https://github.com/olikraus/u8g2/
 #include <Wire.h>
 #include <BME280I2C.h> //BME280 sensor
 
-#ifdef WLED_DISABLE_MQTT
-#error "This user mod requires MQTT to be enabled."
-#endif
-
 void UpdateBME280Data();
 
 #define Celsius // Show temperature measurement in Celsius otherwise is in Fahrenheit 

usermods/Fix_unreachable_netservices_v2/library.json

@@ -1,4 +0,0 @@
-{
-  "name": "Fix_unreachable_netservices_v2",
-  "platforms": ["espressif8266"]
-}

usermods/Fix_unreachable_netservices_v2/readme.md

@@ -30,6 +30,41 @@ The usermod supports the following state changes:
 
 ## Installation
 
-1. Add `Fix_unreachable_netservices` to `custom_usermods` in your PlatformIO environment.
+1. Copy the file `usermod_Fix_unreachable_netservices.h` to the `wled00` directory.
+2. Register the usermod by adding `#include "usermod_Fix_unreachable_netservices.h"` in the top and `registerUsermod(new FixUnreachableNetServices());` in the bottom of `usermods_list.cpp`.
+
+Example **usermods_list.cpp**:
+
+```cpp
+#include "wled.h"
+/*
+ * Register your v2 usermods here!
+ *   (for v1 usermods using just usermod.cpp, you can ignore this file)
+ */
+
+/*
+ * Add/uncomment your usermod filename here (and once more below)
+ * || || ||
+ * \/ \/ \/
+ */
+//#include "usermod_v2_example.h"
+//#include "usermod_temperature.h"
+//#include "usermod_v2_empty.h"
+#include  "usermod_Fix_unreachable_netservices.h"
+
+void registerUsermods()
+{
+  /*
+   * Add your usermod class name here
+   * || || ||
+   * \/ \/ \/
+   */
+  //UsermodManager::add(new MyExampleUsermod());
+  //UsermodManager::add(new UsermodTemperature());
+  //UsermodManager::add(new UsermodRenameMe());
+  UsermodManager::add(new FixUnreachableNetServices());
+
+}
+```
 
 Hopefully I can help someone with that - @gegu

usermods/Fix_unreachable_netservices_v2/usermod_Fix_unreachable_netservices.h

@@ -1,4 +1,12 @@
+#pragma once
+
 #include "wled.h"
+#if defined(ESP32)
+#warning "Usermod FixUnreachableNetServices works only with ESP8266 builds"
+class FixUnreachableNetServices : public Usermod
+{
+};
+#endif
 
 #if defined(ESP8266)
 #include <ping.h>
@@ -8,7 +16,7 @@
  * By this procedure the net services of WLED remains accessible in some problematic WLAN environments.
  * 
  * Usermods allow you to add own functionality to WLED more easily
- * See: https://github.com/wled-dev/WLED/wiki/Add-own-functionality
+ * See: https://github.com/Aircoookie/WLED/wiki/Add-own-functionality
  * 
  * v2 usermods are class inheritance based and can (but don't have to) implement more functions, each of them is shown in this example.
  * Multiple v2 usermods can be added to one compilation easily.
@@ -160,11 +168,4 @@ Delay <input type=\"number\" min=\"5\" max=\"300\" value=\"";
     return USERMOD_ID_FIXNETSERVICES;
   }
 };
-
-static FixUnreachableNetServices fix_unreachable_net_services;
-REGISTER_USERMOD(fix_unreachable_net_services);
-
-#else /* !ESP8266 */
-#warning "Usermod FixUnreachableNetServices works only with ESP8266 builds"
 #endif
-

usermods/INA226_v2/README.md

@@ -22,6 +22,13 @@ The following settings can be configured in the Usermod Menu:
 - **MqttPublishAlways**: Publish always, regardless if there is a change.
 - **MqttHomeAssistantDiscovery**: Enable Home Assistant discovery.
 
+## Dependencies
+
+These must be added under `lib_deps` in your `platform.ini` (or `platform_override.ini`).
+
+- Libraries
+  - `wollewald/INA226_WE@~1.2.9` (by [wollewald](https://registry.platformio.org/libraries/wollewald/INA226_WE))
+  - `Wire`
 
 ## Understanding Samples and Conversion Times
 
@@ -55,12 +62,16 @@ For detailed programming information and register configurations, refer to the [
 
 ## Compiling
 
-To enable, compile with `INA226` in `custom_usermods` (e.g. in `platformio_override.ini`).
+To enable, compile with `USERMOD_INA226` defined (e.g. in `platformio_override.ini`).
 
 ```ini
 [env:ina226_example]
 extends = env:esp32dev
-custom_usermods = ${env:esp32dev.custom_usermods} INA226
-build_flags = ${env:esp32dev.build_flags}
+build_flags =
+  ${common.build_flags} ${esp32.build_flags}
+  -D USERMOD_INA226
   ; -D USERMOD_INA226_DEBUG ; -- add a debug status to the info modal
+lib_deps = 
+  ${esp32.lib_deps}
+  wollewald/INA226_WE@~1.2.9
 ```

usermods/INA226_v2/library.json

@@ -1,7 +0,0 @@
-{
-  "name": "INA226_v2",
-  "build": { "libArchive": false },
-  "dependencies": {
-    "wollewald/INA226_WE":"~1.2.9"
-  }
-}

usermods/INA226_v2/platformio_override.ini

@@ -1,6 +1,9 @@
 [env:ina226_example]
 extends = env:esp32dev
-custom_usermods = ${env:esp32dev.custom_usermods} INA226_v2
 build_flags =
-  ${env:esp32dev.build_flags}
+  ${common.build_flags} ${esp32.build_flags}
+  -D USERMOD_INA226
   ; -D USERMOD_INA226_DEBUG ; -- add a debug status to the info modal
+lib_deps = 
+  ${esp32.lib_deps}
+  wollewald/INA226_WE@~1.2.9

usermods/INA226_v2/usermod_ina226.h

@@ -1,3 +1,5 @@
+#pragma once
+
 #include "wled.h"
 #include <INA226_WE.h>
 
@@ -208,6 +210,12 @@ private:
         }
     }
 
+    ~UsermodINA226()
+    {
+        delete _ina226;
+        _ina226 = nullptr;
+    }
+
 #ifndef WLED_DISABLE_MQTT
     void mqttInitialize()
     {
@@ -543,17 +551,6 @@ public:
         _initDone = true;
         return configComplete;
     }
-
-    ~UsermodINA226()
-    {
-        delete _ina226;
-        _ina226 = nullptr;
-    }
-
 };
 
 const char UsermodINA226::_name[] PROGMEM = "INA226";
-
-
-static UsermodINA226 ina226_v2;
-REGISTER_USERMOD(ina226_v2);

usermods/Internal_Temperature_v2/library.json

@@ -1,4 +0,0 @@
-{
-  "name": "Internal_Temperature_v2",
-  "build": { "libArchive": false }
-}

usermods/Internal_Temperature_v2/readme.md

@@ -23,7 +23,8 @@
 
 
 ## Installation
-- Add `Internal_Temperature` to `custom_usermods` in your `platformio.ini` (or `platformio_override.ini`).
+- Add a build flag `-D USERMOD_INTERNAL_TEMPERATURE` to your `platformio.ini` (or `platformio_override.ini`).
+
 
 ## 📝 Change Log
 

usermods/Internal_Temperature_v2/usermod_internal_temperature.h

@@ -1,3 +1,5 @@
+#pragma once
+
 #include "wled.h"
 
 class InternalTemperatureUsermod : public Usermod
@@ -48,7 +50,7 @@ public:
 #else                                    // ESP32 ESP32S3 and ESP32C3
     temperature = roundf(temperatureRead() * 10) / 10;
 #endif
- if(presetToActivate != 0){
+
     // Check if temperature has exceeded the activation threshold
     if (temperature >= activationThreshold) {
       // Update the state flag if not already set
@@ -56,7 +58,7 @@ public:
         isAboveThreshold = true;
         }
       // Check if a 'high temperature' preset is configured and it's not already active
-      if (currentPreset != presetToActivate) {
+      if (presetToActivate != 0 && currentPreset != presetToActivate) {
         // If a playlist is active, store it for reactivation later
         if (currentPlaylist > 0) {
           previousPlaylist = currentPlaylist;
@@ -99,7 +101,6 @@ public:
           }
         }
       }
- }
 
 #ifndef WLED_DISABLE_MQTT
     if (WLED_MQTT_CONNECTED)
@@ -191,7 +192,4 @@ void InternalTemperatureUsermod::publishMqtt(const char *state, bool retain)
     mqtt->publish(subuf, 0, retain, state);
   }
 #endif
-}
-
-static InternalTemperatureUsermod internal_temperature_v2;
-REGISTER_USERMOD(internal_temperature_v2);
+}

usermods/LD2410_v2/library.json

@@ -1,7 +0,0 @@
-{
-  "name": "LD2410_v2",
-  "build": { "libArchive": false },
-  "dependencies": {
-    "ncmreynolds/ld2410":"^0.1.3"
-  }
-}

usermods/LD2410_v2/readme.md

@@ -10,15 +10,21 @@ The movement and presence state are displayed in both the Info section of the we
 ## Dependencies
 - Libraries
   - `ncmreynolds/ld2410@^0.1.3`
+  - This must be added under `lib_deps` in your `platformio.ini` (or `platformio_override.ini`).
 - Data is published over MQTT - make sure you've enabled the MQTT sync interface.
 
 ## Compilation
 
-To enable, compile with `LD2140` in `custom_usermods` (e.g. in `platformio_override.ini`)
+To enable, compile with `USERMOD_LD2410` defined  (e.g. in `platformio_override.ini`)
 ```ini
 [env:usermod_USERMOD_LD2410_esp32dev]
 extends = env:esp32dev
-custom_usermods = ${env:esp32dev.custom_usermods} LD2140_v2
+build_flags =
+    ${common.build_flags_esp32}
+    -D USERMOD_LD2410
+lib_deps = 
+    ${esp32.lib_deps}
+    ncmreynolds/ld2410@^0.1.3
 ```
 
 ### Configuration Options

usermods/LD2410_v2/usermod_ld2410.h

@@ -1,10 +1,14 @@
-#include "wled.h"
-#include <ld2410.h>
+#warning **** Included USERMOD_LD2410 ****
 
-#ifdef WLED_DISABLE_MQTT
+#ifndef WLED_ENABLE_MQTT
 #error "This user mod requires MQTT to be enabled."
 #endif
 
+#pragma once
+
+#include "wled.h"
+#include <ld2410.h>
+
 class LD2410Usermod : public Usermod {
 
   private:
@@ -231,7 +235,3 @@ void LD2410Usermod::publishMqtt(const char* topic, const char* state, bool retai
   }
 #endif
 }
-
-
-static LD2410Usermod ld2410_v2;
-REGISTER_USERMOD(ld2410_v2);

usermods/LDR_Dusk_Dawn_v2/README.md

@@ -2,14 +2,13 @@
 This usermod will obtain readings from a Light Dependent Resistor (LDR) and will turn on/off specific presets based on those readings. This is useful for exterior lighting situations where you want the lights to only be on when it is dark out.
 
 # Installation
-Add "LDR_Dusk_Dawn" to your platformio.ini environment's custom_usermods and build.
+Add "-D USERMOD_LDR_DUSK_DAWN" to your platformio.ini [common] build_flags and build.
 
 Example:
 ```
-[env:usermod_LDR_Dusk_Dawn_esp32dev]
-extends = env:esp32dev
-custom_usermods = ${env:esp32dev.custom_usermods} 
-  LDR_Dusk_Dawn   # Enable LDR Dusk Dawn Usermod
+[common]
+build_flags =
+  -D USERMOD_LDR_DUSK_DAWN   # Enable LDR Dusk Dawn Usermod
 ```
 
 # Usermod Settings

usermods/LDR_Dusk_Dawn_v2/library.json

@@ -1,4 +0,0 @@
-{
-  "name": "LDR_Dusk_Dawn_v2",
-  "build": { "libArchive": false }
-}

usermods/LDR_Dusk_Dawn_v2/usermod_LDR_Dusk_Dawn_v2.h

@@ -1,3 +1,4 @@
+#pragma once
 #include "wled.h"
 
 #ifndef ARDUINO_ARCH_ESP32
@@ -150,7 +151,3 @@ class LDR_Dusk_Dawn_v2 : public Usermod {
 };
 
 const char LDR_Dusk_Dawn_v2::_name[]    PROGMEM = "LDR_Dusk_Dawn_v2";
-
-
-static LDR_Dusk_Dawn_v2 ldr_dusk_dawn_v2;
-REGISTER_USERMOD(ldr_dusk_dawn_v2);

usermods/MAX17048_v2/library.json

@@ -1,7 +0,0 @@
-{
-  "name": "MAX17048_v2",
-  "build": { "libArchive": false},
-  "dependencies": {
-    "Adafruit_MAX1704X":"https://github.com/adafruit/Adafruit_MAX1704X#1.0.2"
-  }
-}

usermods/MAX17048_v2/readme.md

@@ -5,16 +5,26 @@ This usermod reads information from an Adafruit MAX17048  and outputs the follow
 
 
 ## Dependencies
+Libraries:
+- `Adafruit_BusIO@~1.14.5` (by [adafruit](https://github.com/adafruit/Adafruit_BusIO))
+- `Adafruit_MAX1704X@~1.0.2` (by [adafruit](https://github.com/adafruit/Adafruit_MAX1704X))
+
+These must be added under `lib_deps` in your `platform.ini` (or `platform_override.ini`).
 Data is published over MQTT - make sure you've enabled the MQTT sync interface.
 
 ## Compilation
 
-Add "MAX17048_v2" to your platformio.ini environment's custom_usermods and build.
 To enable, compile with `USERMOD_MAX17048` define in the build_flags (e.g. in `platformio.ini` or `platformio_override.ini`) such as in the example below:
 ```ini
 [env:usermod_max17048_d1_mini]
 extends = env:d1_mini
-custom_usermods = ${env:d1_mini.custom_usermods} MAX17048_v2
+build_flags =
+  ${common.build_flags_esp8266}
+  -D USERMOD_MAX17048
+lib_deps = 
+  ${esp8266.lib_deps}
+  https://github.com/adafruit/Adafruit_BusIO @ 1.14.5
+  https://github.com/adafruit/Adafruit_MAX1704X @ 1.0.2
 ```
 
 ### Configuration Options

usermods/MAX17048_v2/usermod_max17048.h

@@ -1,6 +1,8 @@
 // force the compiler to show a warning to confirm that this file is included
 #warning **** Included USERMOD_MAX17048 V2.0 ****
 
+#pragma once
+
 #include "wled.h"
 #include "Adafruit_MAX1704X.h"
 
@@ -35,8 +37,8 @@ class  Usermod_MAX17048 : public Usermod {
     unsigned long lastSend = UINT32_MAX - (USERMOD_MAX17048_MAX_MONITOR_INTERVAL - USERMOD_MAX17048_FIRST_MONITOR_AT);
 
 
-    unsigned VoltageDecimals = 3;  // Number of decimal places in published voltage values
-    unsigned PercentDecimals = 1;  // Number of decimal places in published percent values
+    uint8_t  VoltageDecimals = 3;  // Number of decimal places in published voltage values
+    uint8_t  PercentDecimals = 1;    // Number of decimal places in published percent values
 
     // string that are used multiple time (this will save some flash memory)
     static const char _name[];
@@ -277,7 +279,3 @@ const char Usermod_MAX17048::_enabled[] PROGMEM = "enabled";
 const char Usermod_MAX17048::_maxReadInterval[] PROGMEM = "max-read-interval-ms";
 const char Usermod_MAX17048::_minReadInterval[] PROGMEM = "min-read-interval-ms";
 const char Usermod_MAX17048::_HomeAssistantDiscovery[] PROGMEM = "HomeAssistantDiscovery";
-
-
-static Usermod_MAX17048 max17048_v2;
-REGISTER_USERMOD(max17048_v2);

usermods/MY9291/library.json

@@ -1,5 +0,0 @@
-{
-  "name": "MY9291",
-  "build": { "libArchive": false },
-  "platforms": ["espressif8266"]
-}

usermods/MY9291/usermode_MY9291.h

@@ -1,3 +1,5 @@
+#pragma once
+
 #include "wled.h"
 #include "MY92xx.h"
 
@@ -40,7 +42,4 @@ class MY9291Usermod : public Usermod {
     uint16_t getId() {
       return USERMOD_ID_MY9291;
     }
-};
-
-static MY9291Usermod my9291;
-REGISTER_USERMOD(my9291);
+};

usermods/PIR_sensor_switch/PIR_Highlight_Standby

@@ -42,7 +42,7 @@
  * 
  * 
  * Usermods allow you to add own functionality to WLED more easily
- * See: https://github.com/wled-dev/WLED/wiki/Add-own-functionality
+ * See: https://github.com/Aircoookie/WLED/wiki/Add-own-functionality
  * 
  * v2 usermods are class inheritance based and can (but don't have to) implement more functions, each of them is shown in this example.
  * Multiple v2 usermods can be added to one compilation easily.

usermods/PIR_sensor_switch/library.json

@@ -1,4 +0,0 @@
-{
-  "name": "PIR_sensor_switch",
-  "build": { "libArchive": false }
-}

usermods/PIR_sensor_switch/readme.md

@@ -5,7 +5,7 @@ This usermod-v2 modification allows the connection of a PIR sensor to switch on
 _Story:_
 
 I use the PIR Sensor to automatically turn on the WLED analog clock in my home office room when I am there.
-The LED strip is switched [using a relay](https://kno.wled.ge/features/relay-control/) to keep the power consumption low when it is switched off.
+The LED strip is switched [using a relay](https://github.com/Aircoookie/WLED/wiki/Control-a-relay-with-WLED) to keep the power consumption low when it is switched off.
 
 ## Web interface
 
@@ -25,7 +25,7 @@ You can also use usermod's off timer instead of sensor's. In such case rotate th
 
 **NOTE:** Usermod has been included in master branch of WLED so it can be compiled in directly just by defining `-D USERMOD_PIRSWITCH` and optionally `-D PIR_SENSOR_PIN=16` to override default pin. You can also change the default off time by adding `-D PIR_SENSOR_OFF_SEC=30`.
 
-## API to enable/disable the PIR sensor from outside. For example from another usermod
+## API to enable/disable the PIR sensor from outside. For example from another usermod:
 
 To query or change the PIR sensor state the methods `bool PIRsensorEnabled()` and `void EnablePIRsensor(bool enable)` are available.
 
@@ -33,16 +33,15 @@ When the PIR sensor state changes an MQTT message is broadcasted with topic `wle
 Usermod can also be configured to send just the MQTT message but not change WLED state using settings page as well as responding to motion only at night
 (assuming NTP and latitude/longitude are set to determine sunrise/sunset times).
 
-### There are two options to get access to the usermod instance
+### There are two options to get access to the usermod instance:
 
-_1._ Include `usermod_PIR_sensor_switch.h` **before** you include other usermods in `usermods_list.cpp'
+1. Include `usermod_PIR_sensor_switch.h` **before** you include other usermods in `usermods_list.cpp'
 
 or
 
-_2._ Use `#include "usermod_PIR_sensor_switch.h"` at the top of the `usermod.h` where you need it.
+2. Use `#include "usermod_PIR_sensor_switch.h"` at the top of the `usermod.h` where you need it.
 
 **Example usermod.h :**
-
 ```cpp
 #include "wled.h"
 
@@ -80,30 +79,25 @@ Usermod can be configured via the Usermods settings page.
 * `override` - override PIR input when WLED state is changed using UI
 * `domoticz-idx` - Domoticz virtual switch ID (used with MQTT `domoticz/in`)
 
+
 Have fun - @gegu & @blazoncek
 
 ## Change log
-
 2021-04
-
 * Adaptation for runtime configuration.
 
 2021-11
-
 * Added information about dynamic configuration options
 * Added option to temporary enable/disable usermod from WLED UI (Info dialog)
 
 2022-11
-
 * Added compile time option for off timer.
 * Added Home Assistant autodiscovery MQTT broadcast.
 * Updated info on compiling.
 
 2023-??
-
 * Override option
 * Domoticz virtual switch ID (used with MQTT `domoticz/in`)
 
 2024-02
-
-* Added compile time option to expand number of PIR sensors (they are logically ORed) `-D PIR_SENSOR_MAX_SENSORS=3`
+* Added compile time option to expand number of PIR sensors (they are logically ORed) `-D PIR_SENSOR_MAX_SENSORS=3`

usermods/PIR_sensor_switch/usermod_PIR_sensor_switch.h

@@ -1,3 +1,5 @@
+#pragma once
+
 #include "wled.h"
 
 #ifndef PIR_SENSOR_PIN
@@ -24,7 +26,7 @@
  * Maintained by: @blazoncek
  * 
  * Usermods allow you to add own functionality to WLED more easily
- * See: https://github.com/wled-dev/WLED/wiki/Add-own-functionality
+ * See: https://github.com/Aircoookie/WLED/wiki/Add-own-functionality
  * 
  * v2 usermods are class inheritance based and can (but don't have to) implement more functions, each of them is shown in this example.
  * Multiple v2 usermods can be added to one compilation easily.
@@ -569,7 +571,3 @@ bool PIRsensorSwitch::readFromConfig(JsonObject &root)
   // use "return !top["newestParameter"].isNull();" when updating Usermod with new features
   return !(pins.isNull() || pins.size() != PIR_SENSOR_MAX_SENSORS);
 }
-
-
-static PIRsensorSwitch pir_sensor_switch;
-REGISTER_USERMOD(pir_sensor_switch);

usermods/PWM_fan/library.json

@@ -1,7 +0,0 @@
-{
-  "name": "PWM_fan",
-  "build": {
-    "libArchive": false,
-    "extraScript": "setup_deps.py"
-  }
-}

usermods/PWM_fan/readme.md

@@ -11,8 +11,8 @@ If the _tachometer_ is supported, the current speed (in RPM) will be displayed o
 
 ## Installation
 
-Add the `PWM_fan` to `custom_usermods` in your `platformio.ini` (or `platformio_override.ini`)
-You will also need `Temperature` or `sht`.
+Add the compile-time option `-D USERMOD_PWM_FAN` to your `platformio.ini` (or `platformio_override.ini`) or use `#define USERMOD_PWM_FAN` in `myconfig.h`.
+You will also need `-D USERMOD_DALLASTEMPERATURE`.
 
 ### Define Your Options
 
@@ -40,9 +40,6 @@ If the fan speed is unlocked, it will revert to temperature controlled speed on
 ## Change Log
 
 2021-10
-
 * First public release
-
 2022-05
-
 * Added JSON API call to allow changing of speed