name: Build using Github Actions
on: [push, pull_request]
jobs:
  build-source:
    name: Checkout source code and build
    runs-on: ubuntu-latest
    steps:
      - uses: actions/checkout@v2
        with:
          submodules: recursive
      - name: Install dependencies
        run: |
          sudo apt-get update
          sudo apt-get install -y python3-serial cmake
      - name: Install Arduino IDE
        run: |
          curl -L https://downloads.arduino.cc/arduino-1.8.19-linux64.tar.xz -o /tmp/arduino-ide.tar.xz
          tar -xf /tmp/arduino-ide.tar.xz --directory ~/
          cd ~/arduino*
          ./install.sh
          ./arduino --pref "boardsmanager.additional.urls=https://raw.githubusercontent.com/espressif/arduino-esp32/gh-pages/package_esp32_index.json" --save-prefs
          ./arduino --install-boards esp32:esp32:2.0.14
      - name: Install Arduino CMake Toolchain
        uses: actions/checkout@v2
        with:
          repository: technyon/Arduino-CMake-Toolchain
          path: arduino-toolchain
      - name: Build
        run: |
          mkdir -p build
          cd build
          touch file_opts
          cmake -D CMAKE_TOOLCHAIN_FILE=../arduino-toolchain/Arduino-toolchain.cmake ..
          echo "# Espressif ESP32 Partition Table" > partitions.csv
          echo "# Name, Type, SubType, Offset, Size, Flags" >> partitions.csv
          echo "nvs,      data, nvs,     0x9000,  0x5000," >> partitions.csv
          echo "otadata,  data, ota,     0xe000,  0x2000," >> partitions.csv
          echo "app0,     app,  ota_0,   0x10000, 0x1E0000," >> partitions.csv
          echo "app1,     app,  ota_1,   0x1F0000,0x1E0000," >> partitions.csv
          echo "spiffs,   data, spiffs,  0x3D0000,0x30000," >> partitions.csv
          make
      - name: Upload artifacts
        run: |
          mkdir release
          cp build/nuki_hub.bin release/
          cp build/nuki_hub.partitions.bin release/
          cp $(find ~/.arduino15/packages/esp32/ | grep boot_app0.bin) release/
          echo "esptool.py --chip esp32 --port /dev/ttyUSB0 --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size detect 0xe000 boot_app0.bin 0x1000 bootloader_dio_80m.bin 0x10000 nuki_hub.bin 0x8000 nuki_hub.partitions.bin" > release/flash.sh
      - uses: actions/upload-artifact@v3
        with:
          name: release-assets
          path: release/