Sternenlabor/nuki_hub
2
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

README corrected

Browse Source
This commit is contained in:
technyon
2023-10-25 17:21:35 +02:00
parent 26aabc1e0a
commit c227565b6a
1 changed files with 1 additions and 1 deletions
Download Patch File Download Diff File Expand all files Collapse all files

2
README.md
View File

@@ -203,7 +203,7 @@ can be configured for a specific role:
- Output: High when RTO or CM active: Outputs a high signal when either ring-to-open or continuous mode is active (opener)
- General input (pull-down): The pin is configured in pull-down configuration and its state is published to the "gpio/pin_x/state" topic
- General input (pull-up): The pin is configured in pull-up configuration and its state is published to the "gpio/pin_x/state" topic
- Genral output: The pin is set to high or low depending on the "gpio/pin/x/state" topic
- Genral output: The pin is set to high or low depending on the "gpio/pin_x/state" topic
Note: The old setting "Enable control via GPIO" is removed. If you had enabled this setting before upgrading to 8.22, the PINs are automatically configured to be
compatible with the previously hard-coded PINs.