Add separate GL-S10 build

.github/workflows/beta.yml

@@ -12,7 +12,7 @@ jobs:
     strategy:
       fail-fast: false
       matrix:
-        board: [esp32, esp32-s3, esp32-s3-oct, esp32-c3, esp32-c6, esp32-h2, esp32-solo1]
+        board: [esp32, esp32-s3, esp32-s3-oct, esp32-c3, esp32-c6, esp32-h2, esp32-solo1, esp32-gl-s10]
         build: [release]
     env:
       BOARD: ${{ matrix.board }}

.github/workflows/build.yml

@@ -18,7 +18,7 @@ jobs:
     strategy:
       fail-fast: false
       matrix:
-        board: [esp32, esp32-s3, esp32-s3-oct, esp32-c3, esp32-c6, esp32-h2, esp32-solo1]
+        board: [esp32, esp32-s3, esp32-s3-oct, esp32-c3, esp32-c6, esp32-h2, esp32-solo1, esp32-gl-s10]
         build: [release]
     env:
       BOARD: ${{ matrix.board }}

.github/workflows/nightly.yml

@@ -34,7 +34,7 @@ jobs:
     strategy:
       fail-fast: false
       matrix:
-        board: [esp32, esp32-s3, esp32-s3-oct, esp32-c3, esp32-c6, esp32-h2, esp32-solo1]
+        board: [esp32, esp32-s3, esp32-s3-oct, esp32-c3, esp32-c6, esp32-h2, esp32-solo1, esp32-gl-s10]
         build: [release]
     env:
       BOARD: ${{ matrix.board }}

.github/workflows/release.yml

@@ -12,7 +12,7 @@ jobs:
     strategy:
       fail-fast: false
       matrix:
-        board: [esp32, esp32-s3, esp32-s3-oct, esp32-c3, esp32-c6, esp32-h2, esp32-solo1]
+        board: [esp32, esp32-s3, esp32-s3-oct, esp32-c3, esp32-c6, esp32-h2, esp32-solo1, esp32-gl-s10]
         build: [release]
     env:
       BOARD: ${{ matrix.board }}

boards/nuki-esp32gls10.json

@@ -0,0 +1,37 @@
+{
+  "build": {
+    "arduino":{
+      "ldscript": "esp32_out.ld"
+    },
+    "core": "esp32",
+    "extra_flags": "-DARDUINO_ESP32_DEV -DBOARD_HAS_PSRAM -mfix-esp32-psram-cache-issue",
+    "f_cpu": "240000000L",
+    "f_flash": "40000000L",
+    "flash_mode": "dio",
+    "mcu": "esp32",
+    "variant": "doitESP32devkitV1"
+  },
+  "connectivity": [
+    "wifi",
+    "bluetooth",
+    "ethernet",
+    "can"
+  ],
+  "debug": {
+    "openocd_board": "esp-wroom-32.cfg"
+  },
+  "frameworks": [
+    "arduino",
+    "espidf"
+  ],
+  "name": "DOIT ESP32 DEVKIT V1",
+  "upload": {
+    "flash_size": "4MB",
+    "maximum_ram_size": 327680,
+    "maximum_size": 4194304,
+    "require_upload_port": true,
+    "speed": 460800
+  },
+  "url": "http://www.doit.am/",
+  "vendor": "DOIT"
+}

pio_package_post.py

@@ -9,6 +9,8 @@ def get_board_name(env):
     
     if env.get('BOARD') == 'nuki-esp32solo1':
         board = 'esp32solo1'
+    elif env.get('BOARD') == 'nuki-esp32gls10':
+        board = 'esp32gls10'
     elif env.get('BOARD') == 'nuki-esp32-s3-oct':
         board = 'esp32s3oct'
     return board

platformio.ini

@@ -78,6 +78,13 @@ build_flags =
     -DCONFIG_NIMBLE_CPP_LOG_LEVEL=0
     -DCONFIG_BT_NIMBLE_LOG_LEVEL=0
 
+[env:esp32-gl-s10]
+extends = env:esp32
+board = nuki-esp32gls10
+board_build.cmake_extra_args =
+    -DSDKCONFIG_DEFAULTS="sdkconfig.defaults;sdkconfig.release.defaults;sdkconfig.defaults.esp32;sdkconfig.gls10.defaults"
+    -DNUKI_TARGET_GL_S10=y
+
 [env:esp32-c3]
 extends = env:esp32
 board = esp32-c3-devkitc-02
@@ -136,6 +143,18 @@ build_flags =
     -DCONFIG_BT_NIMBLE_LOG_LEVEL=0
     -DDEBUG_NUKIHUB
 
+[env:esp32-gl-s10_dbg]
+extends = env:esp32-gl-s10
+custom_build = debug
+board_build.cmake_extra_args =
+    -DSDKCONFIG_DEFAULTS="sdkconfig.defaults;sdkconfig.debug.defaults;sdkconfig.defaults.esp32;sdkconfig.gls10.defaults"
+build_flags =
+    ${env.build_flags}
+    -DCORE_DEBUG_LEVEL=ARDUHAL_LOG_LEVEL_DEBUG
+    -DCONFIG_NIMBLE_CPP_LOG_LEVEL=0
+    -DCONFIG_BT_NIMBLE_LOG_LEVEL=0
+    -DDEBUG_NUKIHUB
+
 [env:esp32-c3_dbg]
 extends = env:esp32-c3
 custom_build = debug

resources/how-to-flash.txt

@@ -29,6 +29,13 @@ e000 boot_app0.bin
 10000 nuki_hub_esp32.bin
 280000 nuki_hub_updater_esp32.bin
 
+ESP32-GL-S10
+e000 boot_app0.bin
+1000 bootloader.bin
+8000 nuki_hub.partitions.bin
+10000 nuki_hub_esp32.bin
+280000 nuki_hub_updater_esp32.bin
+
 ESP32-S3
 e000 boot_app0.bin
 0 bootloader.bin
@@ -87,6 +94,10 @@ As an alternative to the Download Tools, you can also use the esptool from the E
 
 esptool.py --chip esp32 --port /dev/ttyUSB0 --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq keep --flash_size detect 0xe000 boot_app0.bin 0x1000 bootloader.bin 0x10000 nuki_hub_esp32.bin 0x280000 nuki_hub_updater_esp32.bin 0x8000 nuki_hub.partitions.bin
 
+## ESP32-GL-S10
+
+esptool.py --chip esp32 --port /dev/ttyUSB0 --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq keep --flash_size detect 0xe000 boot_app0.bin 0x1000 bootloader.bin 0x10000 nuki_hub_esp32.bin 0x280000 nuki_hub_updater_esp32.bin 0x8000 nuki_hub.partitions.bin
+
 ## ESP32-S3
 
 esptool.py --chip esp32s3 --port /dev/ttyUSB0 --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq keep --flash_size detect 0xe000 boot_app0.bin 0x0 bootloader.bin 0x10000 nuki_hub_esp32s3.bin 0x280000 nuki_hub_updater_esp32s3.bin 0x8000 nuki_hub.partitions.bin

sdkconfig.gls10.defaults

@@ -0,0 +1 @@
+CONFIG_D0WD_PSRAM_CLK_IO=6

src/Config.h

@@ -107,6 +107,21 @@
 #define GITHUB_MASTER_UPDATER_BINARY_URL_DBG (char*)"https://raw.githubusercontent.com/technyon/nuki_hub/binary/ota/debug/master/nuki_hub_updater_esp32-solo1.bin"
 #define NUKI_HUB_HW (char*)"ESP32-SOLO1"
 #define BOOT_BUTTON_GPIO (gpio_num_t)0
+#elif defined(NUKI_TARGET_GL_S10)
+#define GITHUB_LATEST_RELEASE_BINARY_URL "https://raw.githubusercontent.com/technyon/nuki_hub/binary/ota/nuki_hub_esp32-gl-s10.bin"
+#define GITHUB_LATEST_UPDATER_BINARY_URL (char*)"https://raw.githubusercontent.com/technyon/nuki_hub/binary/ota/nuki_hub_updater_esp32.bin"
+#define GITHUB_BETA_RELEASE_BINARY_URL (char*)"https://raw.githubusercontent.com/technyon/nuki_hub/binary/ota/beta/nuki_hub_esp32-gl-s10.bin"
+#define GITHUB_BETA_UPDATER_BINARY_URL (char*)"https://raw.githubusercontent.com/technyon/nuki_hub/binary/ota/beta/nuki_hub_updater_esp32.bin"
+#define GITHUB_MASTER_RELEASE_BINARY_URL (char*)"https://raw.githubusercontent.com/technyon/nuki_hub/binary/ota/master/nuki_hub_esp32-gl-s10.bin"
+#define GITHUB_MASTER_UPDATER_BINARY_URL (char*)"https://raw.githubusercontent.com/technyon/nuki_hub/binary/ota/master/nuki_hub_updater_esp32.bin"
+#define GITHUB_LATEST_RELEASE_BINARY_URL_DBG (char*)"https://raw.githubusercontent.com/technyon/nuki_hub/binary/ota/debug/nuki_hub_esp32-gl-s10.bin"
+#define GITHUB_LATEST_UPDATER_BINARY_URL_DBG (char*)"https://raw.githubusercontent.com/technyon/nuki_hub/binary/ota/debug/nuki_hub_updater_esp32.bin"
+#define GITHUB_BETA_RELEASE_BINARY_URL_DBG (char*)"https://raw.githubusercontent.com/technyon/nuki_hub/binary/ota/debug/beta/nuki_hub_esp32-gl-s10.bin"
+#define GITHUB_BETA_UPDATER_BINARY_URL_DBG (char*)"https://raw.githubusercontent.com/technyon/nuki_hub/binary/ota/debug/beta/nuki_hub_updater_esp32.bin"
+#define GITHUB_MASTER_RELEASE_BINARY_URL_DBG (char*)"https://raw.githubusercontent.com/technyon/nuki_hub/binary/ota/debug/master/nuki_hub_esp32-gl-s10.bin"
+#define GITHUB_MASTER_UPDATER_BINARY_URL_DBG (char*)"https://raw.githubusercontent.com/technyon/nuki_hub/binary/ota/debug/master/nuki_hub_updater_esp32.bin"
+#define NUKI_HUB_HW (char*)"ESP32-GL-S10"
+#define BOOT_BUTTON_GPIO (gpio_num_t)0
 #else
 #define GITHUB_LATEST_RELEASE_BINARY_URL "https://raw.githubusercontent.com/technyon/nuki_hub/binary/ota/nuki_hub_esp32.bin"
 #define GITHUB_LATEST_UPDATER_BINARY_URL (char*)"https://raw.githubusercontent.com/technyon/nuki_hub/binary/ota/nuki_hub_updater_esp32.bin"

updater/pio_package_post.py

@@ -8,6 +8,8 @@ def get_board_name(env):
     board = env.get('BOARD_MCU')
     if env.get('BOARD') == 'nuki-esp32solo1':
         board = 'esp32solo1'
+    elif env.get('BOARD') == 'nuki-esp32gls10':
+        board = 'esp32gls10'
     elif env.get('BOARD') == 'nuki-esp32-s3-oct':
         board = 'esp32s3oct'
     return board

updater/platformio.ini

@@ -67,6 +67,13 @@ extra_scripts =
 board_build.cmake_extra_args =
     -DSDKCONFIG_DEFAULTS="sdkconfig.defaults;sdkconfig.defaults.esp32"
 
+[env:updater_esp32-gl-s10]
+extends = env:updater_esp32
+board = nuki-esp32gls10
+board_build.cmake_extra_args =
+    -DSDKCONFIG_DEFAULTS="sdkconfig.defaults;sdkconfig.defaults.esp32;sdkconfig.gls10.defaults"
+    -DNUKI_TARGET_GL_S10=y
+
 [env:updater_esp32-c3]
 extends = env:updater_esp32
 board = esp32-c3-devkitc-02

updater/sdkconfig.gls10.defaults

@@ -0,0 +1 @@
+CONFIG_D0WD_PSRAM_CLK_IO=6