Sternenlabor/nuki_hub
2
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Add Lock n Go to GPIO

Browse Source
This commit is contained in:
iranl
2024-01-31 19:57:54 +01:00
committed by GitHub
parent 3ecd8227aa
commit 942cd63ac2
5 changed files with 56 additions and 1 deletions
Download Patch File Download Diff File Expand all files Collapse all files

5
README.md
View File

@@ -193,7 +193,9 @@ can be configured for a specific role:
- Disabled: The GPIO is disabled
- Input: Lock: When connect to Ground, a lock command is sent to the lock
- Input: Unlock: When connect to Ground, an unlock command is sent to the lock
- Input: Unlatch: When connect to Ground, an unlatch command is sent to the lock
- Input: Unlatch: When connect to Ground, an unlatch command is sent to the lock
- Input: Lock n Go: When connect to Ground, a Lock n Go command is sent to the lock
- Input: Lock n Go and unlatch: When connect to Ground, a Lock n Go and unlatch command is sent to the lock
- Input: Electric strike actuation: When connect to Ground, an electric strike actuation command is sent to the opener (open door for configured amount of time)
- Input: Activate RTO: When connect to Ground, Ring-to-open is activated (opener)
- Input: Activate CM: When connect to Ground, Continuous mode is activated (opener)
@@ -285,6 +287,7 @@ See previous point, this needs the correct PIN to be configured.
### Using home assistant, it's only possible to lock or unlock the door, but not to unlatch it
Unlatching can be triggered using the lock.open service.
Also make sure "Access level" under "Advanced NUKI Configuration" is set to "Full"
### When controlling two locks (or openers) connected to two ESPs, both devices react to the same command. When using Home Asistant, the same status is display for both locks.