initial w5500 support

networkDevices/W5500Device.cpp

@@ -0,0 +1,95 @@
+#include "W5500Device.h"
+#include "../Pins.h"
+
+W5500Device::W5500Device(const String &hostname)
+: NetworkDevice(hostname)
+{
+}
+
+W5500Device::~W5500Device()
+{}
+
+void W5500Device::initialize()
+{
+    resetDevice();
+
+    Ethernet.init(ETHERNET_CS_PIN);
+    _ethClient = new EthernetClient();
+    _mqttClient = new PubSubClient(*_ethClient);
+
+    // start the Ethernet connection:
+    Serial.println(F("Initialize Ethernet with DHCP:"));
+
+    int dhcpRetryCnt = 0;
+
+    while(dhcpRetryCnt < 3)
+    {
+        Serial.print(F("DHCP connect try #"));
+        Serial.print(dhcpRetryCnt);
+        Serial.println();
+        dhcpRetryCnt++;
+
+        byte mac[] = {0xB0,0xCD,0xAE,0x0F,0xDE,0x10};
+
+        if (Ethernet.begin(mac, 1000, 1000) == 0)
+        {
+            Serial.println(F("Failed to configure Ethernet using DHCP"));
+            // Check for Ethernet hardware present
+            if (Ethernet.hardwareStatus() == EthernetNoHardware)
+            {
+                Serial.println(F("Ethernet module not found"));
+                delay(10000);
+                ESP.restart();
+            }
+            if (Ethernet.linkStatus() == LinkOFF)
+            {
+                Serial.println(F("Ethernet cable is not connected."));
+            }
+
+            IPAddress ip;
+            ip.fromString("192.168.4.1");
+
+            IPAddress subnet;
+            subnet.fromString("255.255.255.0");
+
+            // try to congifure using IP address instead of DHCP:
+            Ethernet.begin(mac, ip);
+            Ethernet.setSubnetMask(subnet);
+
+            delay(2000);
+        }
+        else
+        {
+            dhcpRetryCnt = 1000;
+            Serial.print(F("  DHCP assigned IP "));
+            Serial.println(Ethernet.localIP());
+        }
+    }
+}
+
+void W5500Device::reconfigure()
+{
+    Serial.println(F("Reconfigure W5500 not implemented."));
+}
+
+void W5500Device::resetDevice()
+{
+    Serial.println(F("Resetting network hardware."));
+    pinMode(ETHERNET_RESET_PIN, OUTPUT);
+    digitalWrite(ETHERNET_RESET_PIN, HIGH);
+    delay(250);
+    digitalWrite(ETHERNET_RESET_PIN, LOW);
+    delay(50);
+    digitalWrite(ETHERNET_RESET_PIN, HIGH);
+    delay(1500);
+}
+
+PubSubClient *W5500Device::mqttClient()
+{
+    return _mqttClient;
+}
+
+bool W5500Device::isConnected()
+{
+    return _ethClient->connected();
+}