changes to compile with core 2.0.3

lib/Ethernet/examples/PagerServer/PagerServer.ino

@@ -0,0 +1,71 @@
+/*
+ Pager Server
+
+ A simple server that echoes any incoming messages to all
+ connected clients. Connect two or more telnet sessions
+ to see how server.available() and server.print() works.
+
+ created in September 2020 for the Ethernet library
+ by Juraj Andrassy https://github.com/jandrassy
+
+*/
+#include <Ethernet.h>
+
+// Enter a MAC address for your controller below.
+// Newer Ethernet shields have a MAC address printed on a sticker on the shield
+byte mac[] = { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0xED };
+
+// Set the static IP address to use if the DHCP fails to assign
+IPAddress ip(192, 168, 0, 177);
+
+EthernetServer server(2323);
+
+void setup() {
+
+  Serial.begin(9600);
+  while (!Serial);
+
+  // start the Ethernet connection:
+  Serial.println("Initialize Ethernet with DHCP:");
+  if (Ethernet.begin(mac) == 0) {
+    Serial.println("Failed to configure Ethernet using DHCP");
+    // Check for Ethernet hardware present
+    if (Ethernet.hardwareStatus() == EthernetNoHardware) {
+      Serial.println("Ethernet shield was not found.  Sorry, can't run without hardware. :(");
+      while (true) {
+        delay(1); // do nothing, no point running without Ethernet hardware
+      }
+    }
+    if (Ethernet.linkStatus() == LinkOFF) {
+      Serial.println("Ethernet cable is not connected.");
+    }
+    // try to configure using IP address instead of DHCP:
+    Ethernet.begin(mac, ip);
+  } else {
+    Serial.print("  DHCP assigned IP ");
+    Serial.println(Ethernet.localIP());
+  }
+
+  server.begin();
+
+  IPAddress ip = Ethernet.localIP();
+  Serial.println();
+  Serial.print("To access the server, connect with Telnet client to ");
+  Serial.print(ip);
+  Serial.println(" 2323");
+}
+
+void loop() {
+
+  EthernetClient client = server.available(); // returns first client which has data to read or a 'false' client
+  if (client) { // client is true only if it is connected and has data to read
+    String s = client.readStringUntil('\n'); // read the message incoming from one of the clients
+    s.trim(); // trim eventual \r
+    Serial.println(s); // print the message to Serial Monitor
+    client.print("echo: "); // this is only for the sending client
+    server.println(s); // send the message to all connected clients
+#ifndef ARDUINO_ARCH_SAM
+    server.flush(); // flush the buffers
+#endif /* !defined(ARDUINO_ARCH_SAM) */
+  }
+}