Sternenlabor/WLED
1
0
Fork 0
Code Issues Pull Requests 1 Packages Projects Releases Wiki Activity
Files
b7b6d0a6bc27eac221c0262620a368b951a4f488
WLED/wled00/wled00.ino
cschwinne b7b6d0a6bc Improved ripple effect
2019-02-02 23:59:48 +01:00

574 lines
20 KiB
C++
Raw Blame History

/*
* Main sketch, global variable declarations
*/
/*
* @title WLED project sketch
* @version 0.8.3
* @author Christian Schwinne
*/
//ESP8266-01 (blue) got too little storage space to work with all features of WLED. To use it, you must use ESP8266 Arduino Core v2.3.0 and the setting 512K(64K SPIFFS).
//ESP8266-01 (black) has 1MB flash and can thus fit the whole program. Use 1M(64K SPIFFS).
//Uncomment some of the following lines to disable features to compile for ESP8266-01 (max flash size 434kB):
//You are required to disable over-the-air updates:
//#define WLED_DISABLE_OTA
//You need to choose 1-2 of these features to disable:
//#define WLED_DISABLE_ALEXA
//#define WLED_DISABLE_BLYNK
//#define WLED_DISABLE_CRONIXIE
//#define WLED_DISABLE_HUESYNC
//#define WLED_DISABLE_INFRARED //there is no pin left for this on ESP8266-01
//#define WLED_DISABLE_MOBILE_UI
//to toggle usb serial debug (un)comment following line(s)
//#define WLED_DEBUG
//library inclusions
#include <Arduino.h>
#ifdef ARDUINO_ARCH_ESP32
#include <WiFi.h>
#include <ESPmDNS.h>
#include "src/dependencies/webserver/WebServer.h"
#include <HTTPClient.h>
/*#ifndef WLED_DISABLE_INFRARED
#include <IRremote.h>
#endif*/ //there are issues with ESP32 infrared, so it is disabled for now
#else
#include <ESP8266WiFi.h>
#include <ESP8266mDNS.h>
#include <ESP8266WebServer.h>
#include <ESP8266HTTPClient.h>
#ifndef WLED_DISABLE_INFRARED
#include <IRremoteESP8266.h>
#include <IRrecv.h>
#include <IRutils.h>
#endif
#endif
#include <EEPROM.h>
#include <WiFiUdp.h>
#include <DNSServer.h>
#ifndef WLED_DISABLE_OTA
#include <ArduinoOTA.h>
#include "src/dependencies/webserver/ESP8266HTTPUpdateServer.h"
#endif
#include "src/dependencies/time/Time.h"
#include "src/dependencies/time/TimeLib.h"
#include "src/dependencies/timezone/Timezone.h"
#ifndef WLED_DISABLE_ALEXA
#define ESPALEXA_MAXDEVICES 1
#include "src/dependencies/espalexa/Espalexa.h"
#endif
#ifndef WLED_DISABLE_BLYNK
#include "src/dependencies/blynk/BlynkSimpleEsp.h"
#endif
#include "src/dependencies/e131/E131.h"
#include "src/dependencies/pubsubclient/PubSubClient.h"
#include "html_classic.h"
#include "html_mobile.h"
#include "html_settings.h"
#include "html_other.h"
#include "WS2812FX.h"
#include "ir_codes.h"
//version code in format yymmddb (b = daily build)
#define VERSION 1902021
char versionString[] = "0.8.3-dev";
//AP and OTA default passwords (for maximum change them!)
char apPass[65] = "wled1234";
char otaPass[33] = "wledota";
//spiffs FS only useful for debug (only ESP8266)
//#define USEFS
//Hardware CONFIG (only changeble HERE, not at runtime)
//LED strip pin, button pin and IR pin changeable in NpbWrapper.h!
byte auxDefaultState = 0; //0: input 1: high 2: low
byte auxTriggeredState = 0; //0: input 1: high 2: low
char ntpServerName[] = "0.wled.pool.ntp.org"; //NTP server to use
//WiFi CONFIG (all these can be changed via web UI, no need to set them here)
char clientSSID[33] = "Your_Network";
char clientPass[65] = "";
char cmDNS[33] = "led"; //mDNS address (x.local), only for Apple and Windows, if Bonjour installed
char apSSID[65] = ""; //AP off by default (unless setup)
byte apChannel = 1; //2.4GHz WiFi AP channel (1-13)
byte apHide = 0; //hidden AP SSID
byte apWaitTimeSecs = 32; //time to wait for connection before opening AP
bool recoveryAPDisabled = false; //never open AP (not recommended)
IPAddress staticIP(0, 0, 0, 0); //static IP of ESP
IPAddress staticGateway(0, 0, 0, 0); //gateway (router) IP
IPAddress staticSubnet(255, 255, 255, 0); //most common subnet in home networks
IPAddress staticDNS(8, 8, 8, 8); //only for NTP, google DNS server
//LED CONFIG
uint16_t ledCount = 30; //overcurrent prevented by ABL
bool useRGBW = false; //SK6812 strips can contain an extra White channel
bool autoRGBtoRGBW = false; //if RGBW enabled, calculate White channel from RGB
#define ABL_MILLIAMPS_DEFAULT 850; //auto lower brightness to stay close to milliampere limit
bool turnOnAtBoot = true; //turn on LEDs at power-up
byte bootPreset = 0; //save preset to load after power-up
byte colS[]{255, 159, 0}; //default RGB color
byte colSecS[]{0, 0, 0}; //default RGB secondary color
byte whiteS = 0; //default White channel
byte whiteSecS = 0; //default secondary White channel
byte briS = 127; //default brightness
byte effectDefault = 0;
byte effectSpeedDefault = 75;
byte effectIntensityDefault = 128; //intensity is supported on some effects as an additional parameter (e.g. for blink you can change the duty cycle)
byte effectPaletteDefault = 0; //palette is supported on the FastLED effects, otherwise it has no effect
bool useGammaCorrectionBri = false; //gamma correct brightness (not recommended)
bool useGammaCorrectionRGB = true; //gamma correct colors (strongly recommended)
byte nightlightTargetBri = 0; //brightness after nightlight is over
byte nightlightDelayMins = 60;
bool nightlightFade = true; //if enabled, light will gradually dim towards the target bri. Otherwise, it will instantly set after delay over
bool fadeTransition = true; //enable crossfading color transition
bool enableSecTransition = true; //also enable transition for secondary color
uint16_t transitionDelay = 900; //default crossfade duration in ms
bool reverseMode = false; //flip entire LED strip (reverses all effect directions)
bool initLedsLast = false; //turn on LEDs only after WiFi connected/AP open
bool skipFirstLed = false; //ignore first LED in strip (useful if you need the LED as signal repeater)
byte briMultiplier = 100; //% of brightness to set (to limit power, if you set it to 50 and set bri to 255, actual brightness will be 127)
//User Interface CONFIG
char serverDescription[33] = "WLED Light"; //Name of module
byte currentTheme = 0; //UI theme index for settings and classic UI
byte uiConfiguration = 0; //0: automatic (depends on user-agent) 1: classic UI 2: mobile UI
bool useHSB = true; //classic UI: use HSB sliders instead of RGB by default
char cssFont[33] = "Verdana"; //font to use in classic UI
bool useHSBDefault = useHSB;
//Sync CONFIG
bool buttonEnabled = true;
bool irEnabled = false; //Infrared receiver
uint16_t udpPort = 21324; //WLED notifier default port
uint16_t udpRgbPort = 19446; //Hyperion port
bool receiveNotificationBrightness = true; //apply brightness from incoming notifications
bool receiveNotificationColor = true; //apply color
bool receiveNotificationEffects = true; //apply effects setup
bool notifyDirect = true; //send notification if change via UI or HTTP API
bool notifyButton = true; //send if updated by button or infrared remote
bool notifyAlexa = false; //send notification if updated via Alexa
bool notifyMacro = false; //send notification for macro
bool notifyHue = true; //send notification if Hue light changes
bool notifyTwice = false; //notifications use UDP: enable if devices don't sync reliably
bool alexaEnabled = true; //enable device discovery by Amazon Echo
char alexaInvocationName[33] = "Light"; //speech control name of device. Choose something voice-to-text can understand
char blynkApiKey[36] = ""; //Auth token for Blynk server. If empty, no connection will be made
uint16_t realtimeTimeoutMs = 2500; //ms timeout of realtime mode before returning to normal mode
int arlsOffset = 0; //realtime LED offset
bool receiveDirect = true; //receive UDP realtime
bool enableRealtimeUI = false; //web UI accessible during realtime mode (works on ESP32, lags out ESP8266)
bool arlsDisableGammaCorrection = true; //activate if gamma correction is handled by the source
bool arlsForceMaxBri = false; //enable to force max brightness if source has very dark colors that would be black
bool e131Enabled = true; //settings for E1.31 (sACN) protocol
uint16_t e131Universe = 1;
bool e131Multicast = false;
char mqttDeviceTopic[33] = ""; //main MQTT topic (individual per device, default is wled/mac)
char mqttGroupTopic[33] = "wled/all"; //second MQTT topic (for example to group devices)
char mqttServer[33] = ""; //both domains and IPs should work (no SSL)
bool huePollingEnabled = false; //poll hue bridge for light state
uint16_t huePollIntervalMs = 2500; //low values (< 1sec) may cause lag but offer quicker response
char hueApiKey[47] = "api"; //key token will be obtained from bridge
byte huePollLightId = 1; //ID of hue lamp to sync to. Find the ID in the hue app ("about" section)
IPAddress hueIP = (0,0,0,0); //IP address of the bridge
bool hueApplyOnOff = true;
bool hueApplyBri = true;
bool hueApplyColor = true;
//Time CONFIG
bool ntpEnabled = false; //get internet time. Only required if you use clock overlays or time-activated macros
bool useAMPM = false; //12h/24h clock format
byte currentTimezone = 0; //Timezone ID. Refer to timezones array in wled10_ntp.ino
int utcOffsetSecs = 0; //Seconds to offset from UTC before timzone calculation
byte overlayDefault = 0; //0: no overlay 1: analog clock 2: single-digit clocl 3: cronixie
byte overlayMin = 0, overlayMax = ledCount-1; //boundaries of overlay mode
byte analogClock12pixel = 0; //The pixel in your strip where "midnight" would be
bool analogClockSecondsTrail = false; //Display seconds as trail of LEDs instead of a single pixel
bool analogClock5MinuteMarks = false; //Light pixels at every 5-minute position
char cronixieDisplay[7] = "HHMMSS"; //Cronixie Display mask. See wled13_cronixie.ino
bool cronixieBacklight = true; //Allow digits to be back-illuminated
bool countdownMode = false; //Clock will count down towards date
byte countdownYear = 19, countdownMonth = 1; //Countdown target date, year is last two digits
byte countdownDay = 1, countdownHour = 0;
byte countdownMin = 0, countdownSec = 0;
byte macroBoot = 0; //macro loaded after startup
byte macroNl = 0; //after nightlight delay over
byte macroCountdown = 0;
byte macroAlexaOn = 0, macroAlexaOff = 0;
byte macroButton = 0, macroLongPress = 0;
//Security CONFIG
bool otaLock = false; //prevents OTA firmware updates without password. ALWAYS enable if system exposed to any public networks
bool wifiLock = false; //prevents access to WiFi settings when OTA lock is enabled
bool aOtaEnabled = true; //ArduinoOTA allows easy updates directly from the IDE. Careful, it does not auto-disable when OTA lock is on
uint16_t userVar0 = 0, userVar1 = 0;
//internal global variable declarations
//color
byte col[]{255, 159, 0}; //target RGB color
byte colOld[]{0, 0, 0}; //color before transition
byte colT[]{0, 0, 0}; //current color
byte colIT[]{0, 0, 0}; //color that was last sent to LEDs
byte colSec[]{0, 0, 0};
byte colSecT[]{0, 0, 0};
byte colSecOld[]{0, 0, 0};
byte colSecIT[]{0, 0, 0};
byte white = whiteS, whiteOld, whiteT, whiteIT;
byte whiteSec = whiteSecS, whiteSecOld, whiteSecT, whiteSecIT;
byte lastRandomIndex = 0; //used to save last random color so the new one is not the same
//transitions
bool transitionActive = false;
uint16_t transitionDelayDefault = transitionDelay;
uint16_t transitionDelayTemp = transitionDelay;
unsigned long transitionStartTime;
float tperLast = 0; //crossfade transition progress, 0.0f - 1.0f
//nightlight
bool nightlightActive = false;
bool nightlightActiveOld = false;
uint32_t nightlightDelayMs = 10;
uint8_t nightlightDelayMinsDefault = nightlightDelayMins;
unsigned long nightlightStartTime;
byte briNlT = 0; //current nightlight brightness
//brightness
bool offMode = false;
unsigned long lastOnTime = 0;
byte bri = briS;
byte briOld = 0;
byte briT = 0;
byte briIT = 0;
byte briLast = 127; //brightness before turned off. Used for toggle function
//button
bool buttonPressedBefore = false;
unsigned long buttonPressedTime = 0;
//notifications
bool notifyDirectDefault = notifyDirect;
bool receiveNotifications = true;
unsigned long notificationSentTime = 0;
byte notificationSentCallMode = 0;
bool notificationTwoRequired = false;
//effects
byte effectCurrent = effectDefault;
byte effectSpeed = effectSpeedDefault;
byte effectIntensity = effectIntensityDefault;
byte effectPalette = effectPaletteDefault;
//network
bool onlyAP = false; //only Access Point active, no connection to home network
bool udpConnected = false, udpRgbConnected = false;
//ui style
char cssCol[6][9]={"","","","","",""};
bool showWelcomePage = false;
//hue
char hueError[25] = "Inactive";
uint16_t hueFailCount = 0;
float hueXLast=0, hueYLast=0;
uint16_t hueHueLast=0, hueCtLast=0;
byte hueSatLast=0, hueBriLast=0;
unsigned long hueLastRequestSent = 0;
unsigned long huePollIntervalMsTemp = huePollIntervalMs;
bool hueAttempt = false;
//overlays
byte overlayCurrent = overlayDefault;
byte overlaySpeed = 200;
unsigned long overlayRefreshMs = 200;
unsigned long overlayRefreshedTime;
int overlayArr[6];
uint16_t overlayDur[6];
uint16_t overlayPauseDur[6];
int nixieClockI = -1;
bool nixiePause = false;
//cronixie
byte dP[]{0,0,0,0,0,0};
bool cronixieInit = false;
//countdown
unsigned long countdownTime = 1514764800L;
bool countdownOverTriggered = true;
//timer
byte lastTimerMinute = 0;
byte timerHours[] = {0,0,0,0,0,0,0,0};
byte timerMinutes[] = {0,0,0,0,0,0,0,0};
byte timerMacro[] = {0,0,0,0,0,0,0,0};
byte timerWeekday[] = {255,255,255,255,255,255,255,255}; //weekdays to activate on
//bit pattern of arr elem: 0b11111111: sun,sat,fri,thu,wed,tue,mon,validity
//blynk
bool blynkEnabled = false;
//preset cycling
bool presetCyclingEnabled = false;
byte presetCycleMin = 1, presetCycleMax = 5;
uint16_t presetCycleTime = 1250;
unsigned long presetCycledTime = 0; byte presetCycCurr = presetCycleMin;
bool presetApplyBri = false, presetApplyCol = true, presetApplyFx = true;
bool saveCurrPresetCycConf = false;
//realtime
bool realtimeActive = false;
IPAddress realtimeIP = (0,0,0,0);
unsigned long realtimeTimeout = 0;
//mqtt
bool mqttInit = false;
long lastMQTTReconnectAttempt = 0;
long lastInterfaceUpdate = 0;
byte interfaceUpdateCallMode = 0;
uint32_t mqttFailedConAttempts = 0;
//auxiliary debug pin
byte auxTime = 0;
unsigned long auxStartTime = 0;
bool auxActive = false, auxActiveBefore = false;
//alexa udp
String escapedMac;
#ifndef WLED_DISABLE_ALEXA
Espalexa espalexa;
EspalexaDevice* espalexaDevice;
#endif
//dns server
DNSServer dnsServer;
bool dnsActive = false;
//network time
bool ntpConnected = false;
time_t local = 0;
unsigned long ntpLastSyncTime = 999000000L;
unsigned long ntpPacketSentTime = 999000000L;
IPAddress ntpServerIP;
unsigned int ntpLocalPort = 2390;
#define NTP_PACKET_SIZE 48
//string temp buffer
#define OMAX 2000
char obuf[OMAX];
uint16_t olen = 0;
//server library objects
#ifdef ARDUINO_ARCH_ESP32
WebServer server(80);
#else
ESP8266WebServer server(80);
#endif
HTTPClient* hueClient = NULL;
WiFiClient* mqttTCPClient = NULL;
PubSubClient* mqtt = NULL;
#ifndef WLED_DISABLE_OTA
ESP8266HTTPUpdateServer httpUpdater;
#endif
//udp interface objects
WiFiUDP notifierUdp, rgbUdp;
WiFiUDP ntpUdp;
E131* e131;
//led fx library object
WS2812FX strip = WS2812FX();
//debug macros
#ifdef WLED_DEBUG
#define DEBUG_PRINT(x) Serial.print (x)
#define DEBUG_PRINTLN(x) Serial.println (x)
#define DEBUG_PRINTF(x) Serial.printf (x)
unsigned long debugTime = 0;
int lastWifiState = 3;
unsigned long wifiStateChangedTime = 0;
#else
#define DEBUG_PRINT(x)
#define DEBUG_PRINTLN(x)
#define DEBUG_PRINTF(x)
#endif
//filesystem
#ifdef USEFS
#include <FS.h>;
File fsUploadFile;
#endif
//gamma 2.4 lookup table used for color correction
const byte gamma8[] = {
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 1,
1, 1, 1, 1, 1, 1, 1, 1, 1, 2, 2, 2, 2, 2, 2, 2,
2, 3, 3, 3, 3, 3, 3, 3, 4, 4, 4, 4, 4, 5, 5, 5,
5, 6, 6, 6, 6, 7, 7, 7, 7, 8, 8, 8, 9, 9, 9, 10,
10, 10, 11, 11, 11, 12, 12, 13, 13, 13, 14, 14, 15, 15, 16, 16,
17, 17, 18, 18, 19, 19, 20, 20, 21, 21, 22, 22, 23, 24, 24, 25,
25, 26, 27, 27, 28, 29, 29, 30, 31, 32, 32, 33, 34, 35, 35, 36,
37, 38, 39, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50, 50,
51, 52, 54, 55, 56, 57, 58, 59, 60, 61, 62, 63, 64, 66, 67, 68,
69, 70, 72, 73, 74, 75, 77, 78, 79, 81, 82, 83, 85, 86, 87, 89,
90, 92, 93, 95, 96, 98, 99,101,102,104,105,107,109,110,112,114,
115,117,119,120,122,124,126,127,129,131,133,135,137,138,140,142,
144,146,148,150,152,154,156,158,160,162,164,167,169,171,173,175,
177,180,182,184,186,189,191,193,196,198,200,203,205,208,210,213,
215,218,220,223,225,228,231,233,236,239,241,244,247,249,252,255 };
String txd = "Please disable OTA Lock in security settings!";
//function prototypes
void serveMessage(int,String,String,int=255);
//turns all LEDs off and restarts ESP
void reset()
{
briT = 0;
delay(250); //enough time to send response to client
setAllLeds();
DEBUG_PRINTLN("MODULE RESET");
ESP.restart();
}
//append new c string to temp buffer efficiently
bool oappend(char* txt)
{
uint16_t len = strlen(txt);
if (olen + len >= OMAX) return false; //buffer full
strcpy(obuf + olen, txt);
olen += len;
return true;
}
//append new number to temp buffer efficiently
bool oappendi(int i)
{
char s[11];
sprintf(s,"%ld", i);
return oappend(s);
}
//boot starts here
void setup() {
wledInit();
}
//main program loop
void loop() {
server.handleClient();
handleSerial();
handleNotifications();
handleTransitions();
userLoop();
yield();
handleButton();
handleIR();
handleNetworkTime();
if (!onlyAP)
{
handleAlexa();
handleMQTT();
}
handleOverlays();
yield();
if (!realtimeActive) //block stuff if WARLS/Adalight is enabled
{
if (dnsActive) dnsServer.processNextRequest();
#ifndef WLED_DISABLE_OTA
if (aOtaEnabled) ArduinoOTA.handle();
#endif
handleNightlight();
if (!onlyAP) {
handleHue();
handleBlynk();
}
if (briT) lastOnTime = millis();
if (millis() - lastOnTime < 600)
{
offMode = false;
strip.service();
} else if (!offMode)
{
/*#if LEDPIN == 2 //turn off onboard LED
pinMode(2, OUTPUT);
digitalWrite(2, HIGH);
#endif*/
offMode = true;
}
}
//DEBUG serial logging
#ifdef WLED_DEBUG
if (millis() - debugTime > 5000)
{
DEBUG_PRINTLN("---MODULE DEBUG INFO---");
DEBUG_PRINT("Runtime: "); DEBUG_PRINTLN(millis());
DEBUG_PRINT("Unix time: "); DEBUG_PRINTLN(now());
DEBUG_PRINT("Free heap: "); DEBUG_PRINTLN(ESP.getFreeHeap());
DEBUG_PRINT("Wifi state: "); DEBUG_PRINTLN(WiFi.status());
if (WiFi.status() != lastWifiState)
{
wifiStateChangedTime = millis();
}
lastWifiState = WiFi.status();
DEBUG_PRINT("State time: "); DEBUG_PRINTLN(wifiStateChangedTime);
DEBUG_PRINT("NTP last sync: "); DEBUG_PRINTLN(ntpLastSyncTime);
DEBUG_PRINT("Client IP: "); DEBUG_PRINTLN(WiFi.localIP());
debugTime = millis();
}
#endif
}
Reference in New Issue View Git Blame Copy Permalink